Nico Sabbi wrote: > Hi, > using my 1.3 FF card and drivers from a week ago (with the last > firmware released) > I cannot tune a frequency on a different transponder (with my Nova > card all worked perfectly well). > dvb-apps is a fresh checkout from cvs. > > My setup: diseqc 1.0, hotbird 13 on the first lnb, astra 19 on the > second. > > file "x" contains > R1 > Sat1 > > [root@xp szap]# ./szap -r -i < x > reading channels from file '/root/.szap/channels.conf' > > >>> zapping to 2 'R1': > sat 0, frequency = 11766 MHz V, symbolrate 27500000, vpid = 0x0200, > apid = 0x028a sid = 0x0000 > using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' > status 1f | signal 8888 | snr dede | ber 00000000 | unc ffffffff | > FE_HAS_LOCK > > >>> zapping to 15 'Sat1': > sat 1, frequency = 12480 MHz V, symbolrate 27500000, vpid = 0x06ff, > apid = 0x0700 sid = 0x0000 > status 00 | signal 7272 | snr 4444 | ber 00000000 | unc ffffffff | > status 07 | signal 7a7a | snr 6868 | ber 00000000 | unc ffffffff | > status 03 | signal 7c7c | snr c8c8 | ber 00000000 | unc ffffffff | > status 00 | signal 7676 | snr 4848 | ber 00194790 | unc ffffffff | > status 07 | signal 7979 | snr 5757 | ber 00193f20 | unc ffffffff | > status 00 | signal 0000 | snr 3030 | ber 00194790 | unc ffffffff | > status 07 | signal 7a7a | snr 5f5f | ber 00194790 | unc ffffffff | > status 00 | signal 0101 | snr 3434 | ber 00194790 | unc ffffffff | > status 01 | signal 2d2d | snr 4f4f | ber 00194790 | unc ffffffff | > status 07 | signal 7a7a | snr 6666 | ber 00194790 | unc ffffffff | > > >>> channel not found > > > > [root@xp szap]# ./szap -r Sat1 > reading channels from file '/root/.szap/channels.conf' > zapping to 15 'Sat1': > sat 1, frequency = 12480 MHz V, symbolrate 27500000, vpid = 0x06ff, > apid = 0x0700 sid = 0x0000 > using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' > status 01 | signal 7c7c | snr cbcb | ber 00000000 | unc ffffffff | > status 1f | signal 7c7c | snr d3d3 | ber 00000000 | unc 00000046 | > FE_HAS_LOCK > status 1f | signal 7a7a | snr d3d3 | ber 00000000 | unc 00000000 | > FE_HAS_LOCK > status 1f | signal 7b7b | snr d3d3 | ber 00000000 | unc 00000000 | > FE_HAS_LOCK > > > How can I fix this issue? > Thanks, > > Nico an addition: inverting the sequence of channels tuning succeeds, that to me sounds even more strange
