Hi,
using my 1.3 FF card and drivers from a week ago (with the last firmware
released)
I cannot tune a frequency on a different transponder (with my Nova card
all worked perfectly well).
dvb-apps is a fresh checkout from cvs.
My setup: diseqc 1.0, hotbird 13 on the first lnb, astra 19 on the second.
file "x" contains
R1
Sat1
[root@xp szap]# ./szap -r -i < x
reading channels from file '/root/.szap/channels.conf'
>>> zapping to 2 'R1':
sat 0, frequency = 11766 MHz V, symbolrate 27500000, vpid = 0x0200, apid
= 0x028a sid = 0x0000
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
status 1f | signal 8888 | snr dede | ber 00000000 | unc ffffffff |
FE_HAS_LOCK
>>> zapping to 15 'Sat1':
sat 1, frequency = 12480 MHz V, symbolrate 27500000, vpid = 0x06ff, apid
= 0x0700 sid = 0x0000
status 00 | signal 7272 | snr 4444 | ber 00000000 | unc ffffffff |
status 07 | signal 7a7a | snr 6868 | ber 00000000 | unc ffffffff |
status 03 | signal 7c7c | snr c8c8 | ber 00000000 | unc ffffffff |
status 00 | signal 7676 | snr 4848 | ber 00194790 | unc ffffffff |
status 07 | signal 7979 | snr 5757 | ber 00193f20 | unc ffffffff |
status 00 | signal 0000 | snr 3030 | ber 00194790 | unc ffffffff |
status 07 | signal 7a7a | snr 5f5f | ber 00194790 | unc ffffffff |
status 00 | signal 0101 | snr 3434 | ber 00194790 | unc ffffffff |
status 01 | signal 2d2d | snr 4f4f | ber 00194790 | unc ffffffff |
status 07 | signal 7a7a | snr 6666 | ber 00194790 | unc ffffffff |
>>> channel not found
[root@xp szap]# ./szap -r Sat1
reading channels from file '/root/.szap/channels.conf'
zapping to 15 'Sat1':
sat 1, frequency = 12480 MHz V, symbolrate 27500000, vpid = 0x06ff, apid
= 0x0700 sid = 0x0000
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
status 01 | signal 7c7c | snr cbcb | ber 00000000 | unc ffffffff |
status 1f | signal 7c7c | snr d3d3 | ber 00000000 | unc 00000046 |
FE_HAS_LOCK
status 1f | signal 7a7a | snr d3d3 | ber 00000000 | unc 00000000 |
FE_HAS_LOCK
status 1f | signal 7b7b | snr d3d3 | ber 00000000 | unc 00000000 |
FE_HAS_LOCK
How can I fix this issue?
Thanks,
Nico
