Manu Abraham wrote: > Allan Stirling wrote: > >> >>> >>>> Your card has tuning problems due to i2c communication problems. This >>>> has bee fixed with the bttv patch i posted a while back.. Please do >>>> test >>>> it out whether it solves your communication problems.. >>>> >>>> This patch can be applied against the bttv in 2.6.11.x. >>>> >>>> >>>> Changelog: >>>> >>>> Attached is a patch to bttv which fixes the following problems. >>>> >>>> >>> >>> >>> I tried kernel 2.6.12-rc5, which has the patch, and it didn't work. >>> I just >>> got the same error. >>> >>> Einar >> >> Also the same issue, this time with a Twinhan DTV Sat-CI (Newly >> bought 1030A). Works OK in Windows. > > Can you post your messages ? Just in case this is a new variant: The card is a 1030A1194100-301, '104029A' is printed on the back of the PCB (Silkscreen). On the front is "Ver 4.0" just above the tuner. Inside the tuner can is a TSA5059 mounted in the top left quadrant. The tuner has KFA015B printed on the PCB. It has a CI interface. Full logs gzipped in an attachment - But they look as follows: Jun 15 08:26:22 [kernel] Linux video capture interface: v1.00 Jun 15 08:26:22 [kernel] bttv: driver version 0.9.15 loaded Jun 15 08:26:22 [kernel] bttv: Bt8xx card found (0). Jun 15 08:26:22 [kernel] bttv0: using tuner=4 Jun 15 08:26:22 [kernel] bttv0: add subdevice "dvb0" Jun 15 08:26:22 [kernel] bt878: AUDIO driver version 0.0.0 loaded Jun 15 08:26:22 [kernel] bt878: Bt878 AUDIO function found (0). Jun 15 08:26:22 [kernel] DVB: registering new adapter (bttv0). Jun 15 08:26:22 [kernel] rdc_8820_reset: Resetting DST Jun 15 08:26:22 [kernel] dst_gpio_outb: mask=[0004], enbb=[0004], outhigh=[0000] Jun 15 08:26:22 [kernel] dst_gpio_outb: mask=[0004], enbb=[0004], outhigh=[0004] Jun 15 08:26:23 [kernel] dst_comm_init: Initializing DST.. Jun 15 08:26:23 [kernel] dst_gpio_outb: mask=[ffffffff], enbb=[0001], outhigh=[0000] Jun 15 08:26:23 [kernel] rdc_reset_state: Resetting state machine Jun 15 08:26:23 [kernel] dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0000] Jun 15 08:26:23 [kernel] dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0002] Jun 15 08:26:23 [kernel] dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000] Jun 15 08:26:23 [kernel] read_dst reply is 0xff Jun 15 08:26:23 [kernel] dst_wait_dst_ready: dst wait ready after 1 Jun 15 08:26:23 [kernel] read_dst reply is 0x0 Jun 15 08:26:23 [kernel] dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000] Jun 15 08:26:23 [kernel] dst_get_device_id: Recognise [DSTMCI] Jun 15 08:26:23 [kernel] DST type : satellite ... Jun 15 08:27:08 [kernel] Set Frequency = [1023000] Jun 15 08:27:08 [kernel] rdc_reset_state: Resetting state machine Jun 15 08:27:08 [kernel] dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0002] Jun 15 08:27:08 [kernel] write_dst writing 09 00 03 ff 01 00 55 f0 20 8f Jun 15 08:27:08 [kernel] write_dst: _write_dst error (err == -5, len == 0x0a, b0 == 0x09) Jun 15 08:27:08 [kernel] dst_gpio_outb: mask=[ffffffff], enbb=[0001], outhigh=[0000] Jun 15 08:27:08 [kernel] dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000] Jun 15 08:27:08 [kernel] read_dst reply is 0xff Jun 15 08:27:10 [kernel] dst_wait_dst_ready: dst wait NOT ready after 200 Jun 15 08:27:11 [kernel] Set Frequency = [1023000] Jun 15 08:27:11 [kernel] dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0002] Jun 15 08:27:11 [kernel] write_dst writing 09 00 03 ff 01 00 55 f0 20 8f Jun 15 08:27:11 [kernel] write_dst: _write_dst error (err == -5, len == 0x0a, b0 == 0x09) Jun 15 08:27:11 [kernel] dst_gpio_outb: mask=[ffffffff], enbb=[0001], outhigh=[0000] Jun 15 08:27:11 [kernel] write_dst: _write_dst error (err == -5, len == 0x0a, b0 == 0x09) Jun 15 08:27:11 [kernel] dst_gpio_outb: mask=[ffffffff], enbb=[0001], outhigh=[0000] Jun 15 08:27:11 [kernel] write_dst: RDC 8820 RESET... Jun 15 08:27:11 [kernel] dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000] Jun 15 08:27:11 [kernel] Set Frequency = [1024375] Jun 15 08:27:11 [kernel] dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0002] Jun 15 08:27:11 [kernel] write_dst writing 09 00 04 00 01 00 55 f0 20 8d Jun 15 08:27:11 [kernel] dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000] Jun 15 08:27:11 [kernel] read_dst reply is 0xff Jun 15 08:27:13 [kernel] dst_wait_dst_ready: dst wait NOT ready after 200 -------------- next part -------------- A non-text attachment was scrubbed... Name: 12.log.gz Type: application/x-gzip Size: 1988 bytes Desc: not available Url : http://www.linuxtv.org/pipermail/linux-dvb/attachments/20050615/79aba5af/12.log.bin
