On Tuesday 07 Jun 2005 00:58, Patrick Boettcher wrote:
> Can you please do another CVS update? I added the mt352-initialization and
> the pll-programming. If we are lucky it will work ;). Do you have other
> DVB-hardware or constellation that assures, that reception is possible?
Well I'm very pleased to say that we are lucky and it does just work! I've not
done extensive testing but I was able watch live TV using both Kaffiene and
MythTV.
>
> Please load the dvb-usb.ko module like this, to avoid spoiling the debug
> output by rc-polls:
>
> insmod dvb-usb.ko debug=0x03 disable_rc_polling=1
>
Here is the output with these flags set:
usb 1-2: new high speed USB device using ehci_hcd and address 7
check for cold 547 201
dvb-usb: found a 'Nebula Electronics uDigiTV DVB-T USB2.0)' in cold state,
will try to load a firmware
dvb-usb: downloading firmware from file 'dvb-usb-digitv-01.fw' to the 'Cypress
FX2'
dvb-usb: Nebula Electronics uDigiTV DVB-T USB2.0) successfully initialized and
connected.
usb 1-2: USB disconnect, address 7
dvb-usb: generic DVB-USB module successfully deinitialized and disconnected.
usb 1-2: new high speed USB device using ehci_hcd and address 8
check for cold 547 201
dvb-usb: found a 'Nebula Electronics uDigiTV DVB-T USB2.0)' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the demuxer.
DVB: registering new adapter (Nebula Electronics uDigiTV DVB-T USB2.0)).
>>> 02 7f 01 00 00 00 00
<<< 02 7f 01 13 00 00 00
DVB: registering frontend 0 (Zarlink MT352 DVB-T)...
dvb-usb: Nebula Electronics uDigiTV DVB-T USB2.0) successfully initialized and
connected.
> When everything's working we take care of the remote-control.
>
What do you need for this ?
Thanks very much for getting this working!
Regards
Mike
___________________________________________________________
How much free photo storage do you get? Store your holiday
snaps for FREE with Yahoo! Photos http://uk.photos.yahoo.com
