Zitat von Rinse Kloek <rinse@xxxxxxxxx>: > I have the same problem. I have an P4 3.0 Ghz (Supermicro board) with > one Nova-S PCI and a Nexus-S PCI. The Nova-S works perfectly, byt the > Nexus-S gives the same problem. > > What kind of firmware version do you use ? Firmware: Version 261d (from CVS) > > Regards Rinse > > -----Oorspronkelijk bericht----- > Van: linux-dvb-bounces@xxxxxxxxxxx > [mailto:linux-dvb-bounces@xxxxxxxxxxx] Namens rene.jahn@xxxxxxxx > Verzonden: vrijdag 13 mei 2005 15:43 > Aan: linux-dvb@xxxxxxxxxxx > Onderwerp: [linux-dvb] load_dram(): timeout at block 0 > > I "use" two Hauppauge Nexus-s rev2.3. > > One card works, the second card not(with my new mainboard/cpu) Both > cards work with my old mainboard/cpu. > Both cards work with windows(Mainboard ASUS ? , P3/1G CPU). > > Old system: ASUS Mainboard(P3CL-S) and P3/933 CPU! > New system: MSI K7N2 and Athlon 2000+ > > I use latest CVS drivers(14.05.2005), debian sarge, 2.6.11.7 vanilla and > got the following error: > > dvb-ttpci: found av7110-0. > saa7146: found saa7146 @ mem d3984000 (revision 1, irq 7) > (0x13c2,0x000e). > DVB: registering new adapter (Technotrend/Hauppauge WinTV Nexus-S > rev2.3). > adapter has MAC addr = 00:d0:5c:24:b8:80 > dvb-ttpci: load_dram(): timeout at block 0 > dvb-ttpci: av7110_bootarm(): load_dram() failed > > I didn't mix kernel driver and cvs! -> I use the CVS driver! > > > I don't think it's a problem with my tuner-card, because it works under > windows. > > > Does anybody know something about the problem? > > > ---------------------------------------------------------------- > > _______________________________________________ > > linux-dvb@xxxxxxxxxxx > http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb > > _______________________________________________ > > linux-dvb@xxxxxxxxxxx > http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb > ----------------------------------------------------------------
