I wanted to add some more info, in case anybody could be interested... Linux harmonie 2.6.11 #4 Mon Apr 18 08:20:21 CEST 2005 i686 GNU/Linux ============================== insmod.sh .../dvb-kernel/build-2.6# ./insmod.sh load Inserting DVB modules into kernel FATAL: Module i2c_core not found. FATAL: Module crc32 not found. FATAL: Module firmware_class not found. FATAL: Module videodev not found. FATAL: Module v4l1_compat not found. FATAL: Module v4l2_common not found. ============================== dmesg output saa7146: found saa7146 @ mem e0e9e000 (revision 1, irq 19) (0x13c2,0x000e). DVB: registering new adapter (Technotrend/Hauppauge WinTV Nexus-S rev2.3). adapter has MAC addr = 00:d0:5c:24:b4:e2 dvb-ttpci: gpioirq unknown type=0 len=0 dvb-ttpci: info @ card 0: firm f0240009, rtsl b0250018, vid 71010068, app 8000261d dvb-ttpci: firmware @ card 0 supports CI link layer interface dvb-ttpci: Crystal audio DAC @ card 0 detected saa7146_vv: saa7146 (0): registered device video0 [v4l2] DVB: registering frontend 0 (ST STV0299 DVB-S)... dvb-ttpci: found av7110-0. saa7146: register extension 'budget dvb'. saa7146: register extension 'budget_ci dvb'. saa7146: register extension 'budget dvb /w video in'. usbcore: registered new driver Technotrend/Hauppauge USB-Nova usbcore: registered new driver ttusb-dec b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully usbcore: registered new driver Technisat/B2C2 FlexCop II/IIb/III USB usbcore: registered new driver cinergyT2 usbcore: registered new driver Twinhan DVB-T USB2.0 usbcore: registered new driver Yakumo/Hama/Typhoon DVB-T USB2.0 usbcore: registered new driver DiBcom based USB DVB-T devices (DiB3000M-B based) usbcore: registered new driver DiBcom based USB2.0 DVB-T (DiB3000M-C/P based) devices usbcore: registered new driver AVerMedia AverTV DVB-T USB 2.0 (A800) usbcore: registered new driver Hauppauge WinTV-NOVA-T usb2 usbcore: registered new driver HanfTek UMT-010 USB2.0 DVB-T devices .../dvb-kernel/build-2.6# ============================== scan output harmonie:/usr/share/doc/dvb-utils# scan examples/scan/dvb-s/Hotbird-13.0E | head scanning examples/scan/dvb-s/Hotbird-13.0E using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' initial transponder 12539000 H 27500000 3 >>> tune to: 12539:h:0:27500 0x0000 0x2261: pmt_pid 0x1000 EUTELSAT -- SKYPLEX TXP91 (running) 0x0000 0x22c5: pmt_pid 0x1503 SkyMux -- Skyplex 10.1 (running) 0x0000 0x22c6: pmt_pid 0x150b SKYGATE -- PMT_5387_14-10-04 (running) 0x0000 0x22c8: pmt_pid 0x1502 OpenMux IP Gateway -- HitCast Data 1 (running) 0x0000 0x22c9: pmt_pid 0x1508 OpenMux IP Gateway -- HitCast S.Amer. (running) ============================== szap output harmonie:~# szap "TV5 EUROPE" reading channels from file '/root/.szap/channels.conf' zapping to 1373 'TV5 EUROPE': sat 0, frequency = 11137 MHz H, symbolrate 27500000, vpid = 0x0dc2, apid = 0x0e3a using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' status 03 | signal 7177 | snr 9d0e | ber 00004500 | unc 00000000 | status 1f | signal b124 | snr bd87 | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal b135 | snr bde4 | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal b07d | snr bd90 | ber 00000000 | unc 00000000 | FE_HAS_LOCK s ============================== dvr0 output :-/ harmonie:/usr/share/doc/dvbtune/examples# cat /dev/dvb/adapter0/dvr0 > output harmonie:/usr/share/doc/dvbtune/examples# ls -l output -rw-r--r-- 1 root root 0 Apr 19 20:44 output Any idea how to solve this ??? file size = "0" There is surely better ways to manage with all of this, but i am really new with this kind of stuff. I received the Nexus card on Saturday. p
