> Henrik J?nsson wrote: >> Hello >> I've got a problem I hope someone can help me whit. I have a Twinhan DTV >> Ter- CI split but I accidently did break the cabel between the CI-card >> and the tv-card, anyway thats not the problem. When i do modprobe like >> this: >> >> modprobe bttv i2c_hw=1 card=0x71 >> modprobe dvb-bt8xx >> modprobe dst dst_type=1 >> >> i get this men I do dmesg: >> Linux video capture interface: v1.00 >> bttv: driver version 0.9.15 loaded >> bttv: using 8 buffers with 2080k (520 pages) each for capture >> bttv: Bt8xx card found (0). >> ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17 >> ACPI: PCI interrupt 0000:02:07.0[A] -> GSI 17 (level, low) -> IRQ 225 >> bttv0: Bt878 (rev 17) at 0000:02:07.0, irq: 225, latency: 32, mmio: >> 0xf4000000 >> bttv0: detected: Twinhan VisionPlus DVB-T [card=113], PCI subsystem ID >> is 1822:0001 >> bttv0: using: Twinhan DST + clones [card=113,insmod option] >> bttv0: gpio: en=00000000, out=00000000 in=00f500fd [init] >> bttv0: using tuner=4 >> bttv0: add subdevice "dvb0" >> bt878: AUDIO driver version 0.0.0 loaded >> bt878: Bt878 AUDIO function found (0). >> ACPI: PCI interrupt 0000:02:07.1[A] -> GSI 17 (level, low) -> IRQ 225 >> bt878(0): Bt878 (rev 17) at 02:07.1, irq: 225, latency: 32, memory: >> 0xf4001000 >> DVB: registering new adapter (bttv0). >> dst_check_ci: unable to recognize or DTT-CI >> dst_check_ci please email linux-dvb at linuxtv.org <http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb> with this type in >> DST type : satellite >> DST type flags : 0x4 symdiv >> DVB: registering frontend 0 (DST DVB-S)... >> >> My problem is now why wont the frontend register it as a DVB-T card. >> everthing else seems to be right except thoose last lines. >> > > I think you are using a bit old driver. Can you please update to the > latest dvb-kernel CVS and let know how it proceeds.. ? > > BTW, which card are you using ? I mean the model number ? > > > If it is a new card, not identified by the driver, it would just say > that .. > > Manu Sure i'll try that after this weekend and get back on how it went, i will asso get back on the model number thing =o) (not home this weekend) btw im using SuSE 9.2 with kernel 2.6.11.7 the only thing i've done besides upgrading the kernel is used the bttv-freeze patch. Best Regards Henrik J?nsson
