Henrik J?nsson wrote: > Hello > I've got a problem I hope someone can help me whit. I have a Twinhan DTV > Ter- CI split but I accidently did break the cabel between the CI-card > and the tv-card, anyway thats not the problem. When i do modprobe like > this: > > modprobe bttv i2c_hw=1 card=0x71 > modprobe dvb-bt8xx > modprobe dst dst_type=1 > > i get this men I do dmesg: > Linux video capture interface: v1.00 > bttv: driver version 0.9.15 loaded > bttv: using 8 buffers with 2080k (520 pages) each for capture > bttv: Bt8xx card found (0). > ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17 > ACPI: PCI interrupt 0000:02:07.0[A] -> GSI 17 (level, low) -> IRQ 225 > bttv0: Bt878 (rev 17) at 0000:02:07.0, irq: 225, latency: 32, mmio: > 0xf4000000 > bttv0: detected: Twinhan VisionPlus DVB-T [card=113], PCI subsystem ID > is 1822:0001 > bttv0: using: Twinhan DST + clones [card=113,insmod option] > bttv0: gpio: en=00000000, out=00000000 in=00f500fd [init] > bttv0: using tuner=4 > bttv0: add subdevice "dvb0" > bt878: AUDIO driver version 0.0.0 loaded > bt878: Bt878 AUDIO function found (0). > ACPI: PCI interrupt 0000:02:07.1[A] -> GSI 17 (level, low) -> IRQ 225 > bt878(0): Bt878 (rev 17) at 02:07.1, irq: 225, latency: 32, memory: > 0xf4001000 > DVB: registering new adapter (bttv0). > dst_check_ci: unable to recognize or DTT-CI > dst_check_ci please email linux-dvb@xxxxxxxxxxx with this type in > DST type : satellite > DST type flags : 0x4 symdiv > DVB: registering frontend 0 (DST DVB-S)... > > My problem is now why wont the frontend register it as a DVB-T card. > everthing else seems to be right except thoose last lines. > I think you are using a bit old driver. Can you please update to the latest dvb-kernel CVS and let know how it proceeds.. ? BTW, which card are you using ? I mean the model number ? If it is a new card, not identified by the driver, it would just say that .. Manu
