Hello I've got a problem I hope someone can help me whit. I have a Twinhan DTV Ter- CI split but I accidently did break the cabel between the CI-card and the tv-card, anyway thats not the problem. When i do modprobe like this: modprobe bttv i2c_hw=1 card=0x71 modprobe dvb-bt8xx modprobe dst dst_type=1 i get this men I do dmesg: Linux video capture interface: v1.00 bttv: driver version 0.9.15 loaded bttv: using 8 buffers with 2080k (520 pages) each for capture bttv: Bt8xx card found (0). ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17 ACPI: PCI interrupt 0000:02:07.0[A] -> GSI 17 (level, low) -> IRQ 225 bttv0: Bt878 (rev 17) at 0000:02:07.0, irq: 225, latency: 32, mmio: 0xf4000000 bttv0: detected: Twinhan VisionPlus DVB-T [card=113], PCI subsystem ID is 1822:0001 bttv0: using: Twinhan DST + clones [card=113,insmod option] bttv0: gpio: en=00000000, out=00000000 in=00f500fd [init] bttv0: using tuner=4 bttv0: add subdevice "dvb0" bt878: AUDIO driver version 0.0.0 loaded bt878: Bt878 AUDIO function found (0). ACPI: PCI interrupt 0000:02:07.1[A] -> GSI 17 (level, low) -> IRQ 225 bt878(0): Bt878 (rev 17) at 02:07.1, irq: 225, latency: 32, memory: 0xf4001000 DVB: registering new adapter (bttv0). dst_check_ci: unable to recognize or DTT-CI dst_check_ci please email linux-dvb@xxxxxxxxxxx with this type in DST type : satellite DST type flags : 0x4 symdiv DVB: registering frontend 0 (DST DVB-S)... My problem is now why wont the frontend register it as a DVB-T card. everthing else seems to be right except thoose last lines. Do anyone have some idea what i can do to make it work? Best regards Henrik J?nsson
