Hi Patrick, On Di Apr 05, 2005 at 10:09:1112735358 +0200, Patrick Boettcher wrote: > > >>>>177500000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_3_4:FEC_NONE:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE > >>>>191500000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_NONE:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE > > Your initial tuning data file for 177.5 and 191.5 is wrong. The bandwidth for > that channels is 7MHz. Please use the file from dvb-apps CVS. (also use dvbscan > von dvb-apps CVS then). > > >I testet the kernel 2.6.10 from Debian an a self compiled 2.6.11.6 > >Kernel with today cvs dvb-kernel. > > When using dvb-kernel, please load flexcop-pci (and its depending > modules) instead of skystar2. (With this modules a more verbose debugging is > also possible, when it still fails). same error with flexcop-pci driver ./dvbscan dvb-t/de-Berlin scanning dvb-t/de-Berlin using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' initial transponder 522000000 0 2 9 1 1 2 0 initial transponder 570000000 0 2 9 1 1 2 0 initial transponder 658000000 0 2 9 1 1 2 0 >>> tune to: >>> 522000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE WARNING: >>> tuning failed!!! >>> tune to: >>> 522000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE >>> (tuning failed) WARNING: >>> tuning failed!!! >>> tune to: >>> 570000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE WARNING: >>> tuning failed!!! >>> tune to: >>> 570000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE >>> (tuning failed) WARNING: >>> tuning failed!!! >>> tune to: >>> 658000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE WARNING: >>> tuning failed!!! >>> tune to: >>> 658000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE >>> (tuning failed) WARNING: >>> tuning failed!!! ERROR: initial tuning failed dumping lists (0 services) Done. dmesg | grep b2c2 shows b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loadedsuccessfully b2c2-flexcop: MAC address = 00:d0:d7:0b:83:86 b2c2-flexcop: i2c master_xfer failed b2c2-flexcop: i2c master_xfer failed b2c2-flexcop: found the mt352 at i2c address: 0x0f b2c2-flexcop: initialization of 'AirStar 2 DVB-T' at the 'PCI' bus controlled by a 'FlexCopIIb' complete Martin
