On Thu, 17 Mar 2005, [iso-8859-15] Fran?ois-Xavier Payet wrote: > Ok, so I must be very silly > > By doing just a "modprobe saa7134-dvb", dmesg gives me : > > saa7130/34: v4l2 driver version 0.2.12 loaded > ACPI: PCI interrupt 0000:01:09.0[A] -> GSI 7 (level, low) -> IRQ 7 > saa7134[0]: found at 0000:01:09.0, rev: 1, irq: 7, latency: 32, mmio: > 0xde001000 > saa7134[0]: subsystem: 11bd:002d, board: Pinnacle PCTV 300i DVB-T + PAL > [card=50,insmod option] > saa7134[0]: board init: gpio is cc06000 > tda9885/6/7: chip found @ 0x86 > tuner 3-0060: chip found @ 0xc0 (saa7134[0]) > tuner 3-0060: microtune: companycode=3cbf part=42 rev=09 > tuner 3-0060: microtune MT2050 found, OK > saa7134[0]: i2c eeprom 00: bd 11 2d 00 f8 f8 1c 00 43 43 a9 1c 55 d2 b2 92 > saa7134[0]: i2c eeprom 10: 00 f0 04 04 ff 20 ff ff ff ff ff ff ff ff ff ff > saa7134[0]: i2c eeprom 20: 01 40 01 02 03 ff 03 01 08 ff 00 25 ff ff ff ff > saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > saa7134[0]: registered device video1 [v4l2] > saa7134[0]: registered device vbi1 > saa7134[0]: pinnacle 300i dvb setup > DVB: registering new adapter (saa7134[0]). > DVB: registering frontend 0 (Zarlink MT352 DVB-T)... > > Now, can anyone gives me a little tip on where to go now (software to use, > link to an howto, ...) Francois, you are on the right path now. For a viewer you may take kaffeine-0.6-cvs or try xine first. Regards, Rainer -- Rainer Schubert - Linux TV User
