Le Jeudi 17 Mars 2005 21:58, Rainer Schubert a ?crit?: > On Thu, 17 Mar 2005, [iso-8859-15] Fran?ois-Xavier Payet wrote: > > Ok, so I must be very silly > > > > By doing just a "modprobe saa7134-dvb", dmesg gives me : > > > > saa7130/34: v4l2 driver version 0.2.12 loaded > > ACPI: PCI interrupt 0000:01:09.0[A] -> GSI 7 (level, low) -> IRQ 7 > > saa7134[0]: found at 0000:01:09.0, rev: 1, irq: 7, latency: 32, mmio: > > 0xde001000 > > saa7134[0]: subsystem: 11bd:002d, board: Pinnacle PCTV 300i DVB-T + PAL > > [card=50,insmod option] > > saa7134[0]: board init: gpio is cc06000 > > tda9885/6/7: chip found @ 0x86 > > tuner 3-0060: chip found @ 0xc0 (saa7134[0]) > > tuner 3-0060: microtune: companycode=3cbf part=42 rev=09 > > tuner 3-0060: microtune MT2050 found, OK > > saa7134[0]: i2c eeprom 00: bd 11 2d 00 f8 f8 1c 00 43 43 a9 1c 55 d2 b2 > > 92 saa7134[0]: i2c eeprom 10: 00 f0 04 04 ff 20 ff ff ff ff ff ff ff ff > > ff ff saa7134[0]: i2c eeprom 20: 01 40 01 02 03 ff 03 01 08 ff 00 25 ff > > ff ff ff saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff > > ff ff ff ff saa7134[0]: registered device video1 [v4l2] > > saa7134[0]: registered device vbi1 > > saa7134[0]: pinnacle 300i dvb setup > > DVB: registering new adapter (saa7134[0]). > > DVB: registering frontend 0 (Zarlink MT352 DVB-T)... > > > > Now, can anyone gives me a little tip on where to go now (software to > > use, link to an howto, ...) > > Francois, > you are on the right path now. > > For a viewer you may take kaffeine-0.6-cvs or try xine first. > > Regards, > Rainer Just halting the PC and everything was fine (I guess it was because of a firmware upgrade. My dvb-t card is now working great under kaffeine / mplayer / ... Thanks a lot all of you for your help FX
