Hi I am just diving into dvb for linux. I am however experiencing aa annoying problem with my siemens dvb-c card. I am using a 2.6.11 kernel with dvb compiled in. When booting the modules get loaded but I get a notification about MAC adres problem. When I try to scan for channels, it is impossible to tune. This is the output: Linux video capture interface: v1.00 saa7146: register extension 'dvb'. saa7146: found saa7146 @ mem e0802000 (revision 1, irq 5) (0x110a,0x0000). DVB: registering new adapter (Fujitsu Siemens DVB-C). adapter failed MAC signature check encoded MAC from EEPROM was ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff dvb-ttpci: gpioirq unknown type=0 len=0 dvb-ttpci: info @ card 0: firm f0240009, rtsl b0250018, vid 71010068, app 8000261c dvb-ttpci: firmware @ card 0 supports CI link layer interface dvb-ttpci: DVB-C w/o analog module @ card 0 detected saa7146_vv: saa7146 (0): registered device video0 [v4l2] DVB: registering frontend 0 (VLSI VES1820 DVB-C)... dvb-ttpci: found av7110-0. Someone knows what is going wrong? Greets Peter
