Hi I'm trying to get my terratec dvb-t card to work under SUSE 9.2 with kernel 2.6.11.3. But i can't get it to find any channels. this is how it looks when i do dmesg Linux video capture interface: v1.00 saa7146: register extension 'dvb'. saa7146: register extension 'budget dvb'. saa7146: register extension 'budget_ci dvb'. saa7146: register extension 'budget dvb /w video in'. ACPI: PCI interrupt 0000:02:09.0[A] -> GSI 19 (level, low) -> IRQ 217 saa7146: found saa7146 @ mem ffffc20000842000 (revision 1, irq 217) (0x153b,0x1157). DVB: registering new adapter (Terratec Cinergy 1200 DVB-T). adapter failed MAC signature check encoded MAC from EEPROM was ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff KNC1-0: MAC addr = 00:0a:ac:01:a4:ef DVB: registering frontend 0 (Philips TDA10046H DVB-T)... ciintf_init: CI interface initialised with ./scan dvb-t/se-Emmaboda > channels.conf i get this scanning dvb-t/se-Emmaboda using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' initial transponder 474000000 0 2 0 3 1 2 0 initial transponder 530000000 0 2 0 3 1 2 0 initial transponder 674000000 0 2 0 3 1 2 0 initial transponder 730000000 0 2 0 3 1 2 0 >>> tune to: 474000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_NONE:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE WARNING: >>> tuning failed!!! >>> tune to: 474000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_NONE:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE (tuning failed) WARNING: >>> tuning failed!!! >>> tune to: 530000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_NONE:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE WARNING: >>> tuning failed!!! >>> tune to: 530000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_NONE:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE (tuning failed) WARNING: >>> tuning failed!!! >>> tune to: 674000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_NONE:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE WARNING: >>> tuning failed!!! >>> tune to: 674000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_NONE:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE (tuning failed) WARNING: >>> tuning failed!!! >>> tune to: 730000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_NONE:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE WARNING: >>> tuning failed!!! >>> tune to: 730000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_NONE:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE (tuning failed) WARNING: >>> tuning failed!!! ERROR: initial tuning failed dumping lists (0 services) Done. is there anyone out there that can help me? // Henrik
