On Thursday 10 March 2005 23:08, you wrote: > thank you for the patch. I just updatet the cvs and ran then patch. > Everything seems to load, except there is no crc32 modul. Is it > neccessary? I have a crc32c.ko. > > ./insmod.sh: > > Inserting DVB modules into kernel > FATAL: Module crc32 not found. > insmod: error inserting './b2c2-flexcop-pci.ko': -1 Unknown symbol in module You don't use b2c2-flexcop, so no there's notting to worry about. > Now testing with dvbscan: > > ---------------------------------- > nordlicht:~ # dvbscan /usr/share/dvb/dvb-s/Astra-19.2E > scanning /usr/share/dvb/dvb-s/Astra-19.2E > using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' > initial transponder 12551500 V 22000000 5 > >>> tune to: 12551:v:0:22000 > WARNING: >>> tuning failed!!! > >>> tune to: 12551:v:0:22000 (tuning failed) > WARNING: >>> tuning failed!!! > ERROR: initial tuning failed > dumping lists (0 services) > Done. > ---------------------------------- Yuk, now you need to try out what Oliver said: > > > First of all you should check whether 13V/18V voltage switching and > > > 22kHz signal generation work. If not you have to find out how the LNBP20 > > > is wired to the GPIOs. > Same as before. Then I made a test with the scan option of kaxtv. It > finds the frontend but shows on the terminal: Well keep the tools to the simple stuff, dvbscan/szap. Kenneth
