Manu Abraham wrote: First, thank you for your attention. >> bttv0: enabling ETBF (430FX/VP3 compatibilty) > > Which motherboard are you having ? Uh, it's a lousy FIC KZM-6120 with Intel 440ZX-PCI-Chipset (if that is of any interest for you). > > Can you please load the modules with the debug and verbose options ? Here we go : bttv0: Bt878 (rev 17) at 0000:00:12.0, irq: 5, latency: 64, mmio: 0xf4102000 bttv0: detected: Twinhan VisionPlus DVB-T [card=113], PCI subsystem ID is 1822:0001 bttv0: using: Twinhan DST + clones [card=113,insmod option] bttv0: enabling ETBF (430FX/VP3 compatibilty) bttv0: risc main @ 0aa26000 bttv0: gpio: en=00000000, out=00000000 in=00f100fe [init] bttv0: using tuner=4 bttv0: add subdevice "dvb0" bt878: Unknown parameter `bt878_debug' bt878: AUDIO driver version 0.0.0 loaded bt878: Bt878 AUDIO function found (0). PCI: Enabling device 0000:00:12.1 (0100 -> 0102) PCI: Found IRQ 5 for device 0000:00:12.1 PCI: Sharing IRQ 5 with 0000:00:12.0 bt878(0): Bt878 (rev 17) at 00:12.1, irq: 5, latency: 64, memory: 0xf4103000 dvb_bt8xx: identified card0 as bttv0 DVB: registering new adapter (bttv0). DVB: register adapter0/demux0 @ minor: 4 (0x04) DVB: register adapter0/dvr0 @ minor: 5 (0x05) DVB: register adapter0/net0 @ minor: 7 (0x07) rdc_8820_reset: Resetting DST dst_gpio_outb: mask=[0004], enbb=[0004], outhigh=[0000] dst_gpio_outb: mask=[0004], enbb=[0004], outhigh=[0004] dst_comm_init: Initializing DST.. dst_gpio_outb: mask=[ffffffff], enbb=[0001], outhigh=[0000] rdc_reset_state: Resetting state machine dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0000] dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0002] write_dst writing 00 06 00 00 00 00 00 fa dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000] read_dst reply is 0xff dst_wait_dst_ready: dst wait ready after 0 read_dst: read_dst error (err == -5, len == 0x08, b0 == 0x00) dst_error_recovery: Trying to recover from previous errors... rdc_8820_reset: Resetting DST dst_gpio_outb: mask=[0004], enbb=[0004], outhigh=[0000] dst_gpio_outb: mask=[0004], enbb=[0004], outhigh=[0004] dst_comm_init: Initializing DST.. dst_gpio_outb: mask=[ffffffff], enbb=[0001], outhigh=[0000] rdc_reset_state: Resetting state machine dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0000] dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0002] dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000] read_dst: read_dst error (err == -5, len == 0x08, b0 == 0x00) dst_error_recovery: Trying to recover from previous errors... rdc_8820_reset: Resetting DST dst_gpio_outb: mask=[0004], enbb=[0004], outhigh=[0000] dst_gpio_outb: mask=[0004], enbb=[0004], outhigh=[0004] dst_comm_init: Initializing DST.. dst_gpio_outb: mask=[ffffffff], enbb=[0001], outhigh=[0000] rdc_reset_state: Resetting state machine dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0000] dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0002] dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000] read_dst: read_dst error (err == -5, len == 0x08, b0 == 0x00) dst_error_recovery: Trying to recover from previous errors... rdc_8820_reset: Resetting DST dst_gpio_outb: mask=[0004], enbb=[0004], outhigh=[0000] dst_gpio_outb: mask=[0004], enbb=[0004], outhigh=[0004] dst_comm_init: Initializing DST.. dst_gpio_outb: mask=[ffffffff], enbb=[0001], outhigh=[0000] rdc_reset_state: Resetting state machine dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0000] dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0002] dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000] read_dst: read_dst error (err == -5, len == 0x08, b0 == 0x00) dst_error_recovery: Trying to recover from previous errors... rdc_8820_reset: Resetting DST dst_gpio_outb: mask=[0004], enbb=[0004], outhigh=[0000] dst_gpio_outb: mask=[0004], enbb=[0004], outhigh=[0004] dst_comm_init: Initializing DST.. dst_gpio_outb: mask=[ffffffff], enbb=[0001], outhigh=[0000] rdc_reset_state: Resetting state machine dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0000] dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0002] dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000] dst_error_recovery: Trying to recover from previous errors... rdc_8820_reset: Resetting DST dst_gpio_outb: mask=[0004], enbb=[0004], outhigh=[0000] dst_gpio_outb: mask=[0004], enbb=[0004], outhigh=[0004] dst_comm_init: Initializing DST.. dst_gpio_outb: mask=[ffffffff], enbb=[0001], outhigh=[0000] rdc_reset_state: Resetting state machine dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0000] dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0002] dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000] dst_get_device_id: Trying to recover.. dst_get_device_id: Checksum failure! dst_probe: unknown device. DVB: register adapter0/ca0 @ minor: 6 (0x06) DVB: registering frontend 0 (<NULL>)... DVB: register adapter0/frontend0 @ minor: 3 (0x03) > Manu > > Bye, Martin Cap
