Hi everybody, Hi Manu,
I tried your patchset for Twinhan-based DVB-cards, but they give me
kernel-oops.
The card I have is a Twinhan-clone dvb-t card, named "Hama DVB-T PCI
Card" (it's an exact clone of Twinhan cards) and I use the CVS
dvb-kernel tree dated Feb. 17th 2005, kernel is 2.6.10. Applying your
patchset and compiling was successfull.
So after loading the corresponding drivers namely these here,
"
dvb-core
bttv i2c_hw=1 card=0x71
dvb-bt8xx
dst"
I get the following output from dmesg (which is still fine, besides the
last line!):
"Linux video capture interface: v1.00
bttv: driver version 0.9.15 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Host bridge needs ETBF enabled.
bttv: Bt8xx card found (0).
PCI: Enabling device 0000:00:12.0 (0100 -> 0102)
PCI: Found IRQ 5 for device 0000:00:12.0
PCI: Sharing IRQ 5 with 0000:00:12.1
bttv0: Bt878 (rev 17) at 0000:00:12.0, irq: 5, latency: 64, mmio: 0xf4102000
bttv0: detected: Twinhan VisionPlus DVB-T [card=113], PCI subsystem ID
is 1822:0001
bttv0: using: Twinhan DST + clones [card=113,insmod option]
bttv0: enabling ETBF (430FX/VP3 compatibilty)
bttv0: gpio: en=00000000, out=00000000 in=00fb90fe [init]
bttv0: using tuner=4
bttv0: add subdevice "dvb0"
bt878: AUDIO driver version 0.0.0 loaded
bt878: Bt878 AUDIO function found (0).
PCI: Enabling device 0000:00:12.1 (0100 -> 0102)
PCI: Found IRQ 5 for device 0000:00:12.1
PCI: Sharing IRQ 5 with 0000:00:12.0
bt878(0): Bt878 (rev 17) at 00:12.1, irq: 5, latency: 64, memory: 0xf4103000
DVB: registering new adapter (bttv0).
DVB: registering frontend 0 (<NULL>)..."
This is the point where I start an dvb-application eg. vdr or femon,
dmesg then gives me the kernel oops:
"Unable to handle kernel NULL pointer dereference at virtual address
000001ec
printing eip:
ccb1eb13
*pde = 00000000
Oops: 0000 [#1]
PREEMPT SMP
Modules linked in: dvb_bt8xx nxt6000 mt352 sp887x dst_ca dst bt878
cx24110 or51211 tuner bttv video_buf firmware_class v4l2_common
btcx_risc videodev dvb_core ipv6 thermal fan button processor ac battery
em8300 i2c_algo_bit soundcore adv717x i2c_core tsdev mousedev 3c59x
joydev usbhid usbkbd evdev uhci_hcd usbcore genrtc unix xfs ide_generic
ide_disk piix ide_core
CPU: 0
EIP: 0060:[<ccb1eb13>] Not tainted VLI
EFLAGS: 00010286 (2.6.10)
EIP is at dvb_frontend_ioctl+0x46/0x4a3 [dvb_core]
eax: 00000000 ebx: ca4d3900 ecx: 80a86f3d edx: 00000000
esi: ffffffa1 edi: 80a86f3d ebp: c9368da0 esp: c961fe98
ds: 007b es: 007b ss: 0068
Process femon (pid: 3076, threadinfo=c961e000 task=cbee7ae0)
Stack: 00000000 caee3420 cad3daf8 00000000 c117a620 c013bb52 00000000
c124cd94
b7f80bc0 cad3daf8 cb733940 00000001 cb733940 c9368da0 80a86f3d
fffffff2
c9368da0 bffff990 ccb186f8 c9368da0 c9368da0 caee3420 cb0e5910
b7f80bc0
Call Trace:
[<c013bb52>] do_no_page+0x27f/0x2bf
[<ccb186f8>] dvb_usercopy+0x99/0xf3 [dvb_core]
[<c0112946>] do_page_fault+0x187/0x4ce
[<c014e34c>] chrdev_open+0x160/0x176
[<c01467d6>] dentry_open+0x11e/0x1e8
[<c01466b2>] filp_open+0x36/0x3c
[<ccb182a5>] dvb_generic_ioctl+0x2f/0x38 [dvb_core]
[<ccb1eacd>] dvb_frontend_ioctl+0x0/0x4a3 [dvb_core]
[<c0155c37>] sys_ioctl+0x1e0/0x1fd
[<c0102b57>] syscall_call+0x7/0xb
Code: 00 83 3d 90 a3 b2 cc 00 8b 58 28 8b 43 0c 89 04 24 74 11 68 aa 17
b2 cc 68 45 1b b2 cc e8 a7 9e 5f f3 58 5a 85 db 74 0c 8b 14 24 <83> ba
ec 01 00 00 00 74 0a b8 ed ff ff ff e9 42 04 00 00 8b 44"
The application I started here was 'femon', as you can see. 'femon'
itself gives me a segfault.
If you need more verbose output, please tell me.
Bye,
Martin Cap.
