Daniele Alessandrelli <daniele.alessandrelli@xxxxxxxxx> writes:
> Fix all checkpatch "braces {} are not necessary" warnings for
> rtl8723au/hal/rtl8723a_hal_init.c
>
> Signed-off-by: Daniele Alessandrelli <daniele.alessandrelli@xxxxxxxxx>
> ---
> drivers/staging/rtl8723au/hal/rtl8723a_hal_init.c | 40 ++++++++---------------
> 1 file changed, 14 insertions(+), 26 deletions(-)
Looks good to me.
Acked-by: Jes Sorensen <Jes.Sorensen@xxxxxxxxxx>
>
> diff --git a/drivers/staging/rtl8723au/hal/rtl8723a_hal_init.c b/drivers/staging/rtl8723au/hal/rtl8723a_hal_init.c
> index a5eadd4..e88d851 100644
> --- a/drivers/staging/rtl8723au/hal/rtl8723a_hal_init.c
> +++ b/drivers/staging/rtl8723au/hal/rtl8723a_hal_init.c
> @@ -424,9 +424,8 @@ hal_ReadEFuse_WiFi(struct rtw_adapter *padapter,
> offset = GET_HDR_OFFSET_2_0(efuseHeader);
>
> ReadEFuseByte23a(padapter, eFuse_Addr++, &efuseExtHdr);
> - if (ALL_WORDS_DISABLED(efuseExtHdr)) {
> + if (ALL_WORDS_DISABLED(efuseExtHdr))
> continue;
> - }
>
> offset |= ((efuseExtHdr & 0xF0) >> 1);
> wden = (efuseExtHdr & 0x0F);
> @@ -524,9 +523,8 @@ hal_ReadEFuse_BT(struct rtw_adapter *padapter,
>
> ReadEFuseByte23a(padapter, eFuse_Addr++,
> &efuseExtHdr);
> - if (ALL_WORDS_DISABLED(efuseExtHdr)) {
> + if (ALL_WORDS_DISABLED(efuseExtHdr))
> continue;
> - }
>
> offset |= ((efuseExtHdr & 0xF0) >> 1);
> wden = (efuseExtHdr & 0x0F);
> @@ -630,9 +628,8 @@ u16 rtl8723a_EfuseGetCurrentSize_WiFi(struct rtw_adapter *padapter)
> hoffset = GET_HDR_OFFSET_2_0(efuse_data);
> efuse_addr++;
> efuse_OneByteRead23a(padapter, efuse_addr, &efuse_data);
> - if (ALL_WORDS_DISABLED(efuse_data)) {
> + if (ALL_WORDS_DISABLED(efuse_data))
> continue;
> - }
>
> hoffset |= ((efuse_data & 0xF0) >> 1);
> hworden = efuse_data & 0x0F;
> @@ -721,9 +718,8 @@ u16 rtl8723a_EfuseGetCurrentSize_BT(struct rtw_adapter *padapter)
> }
>
> /* Check if we need to check next bank efuse */
> - if (efuse_addr < retU2) {
> + if (efuse_addr < retU2)
> break; /* don't need to check next bank. */
> - }
> }
>
> retU2 = ((bank - 1) * EFUSE_BT_REAL_BANK_CONTENT_LEN) + efuse_addr;
> @@ -1149,9 +1145,8 @@ static int _LLTWrite(struct rtw_adapter *padapter, u32 address, u32 data)
> /* polling */
> do {
> value = rtl8723au_read32(padapter, LLTReg);
> - if (_LLT_NO_ACTIVE == _LLT_OP_VALUE(value)) {
> + if (_LLT_NO_ACTIVE == _LLT_OP_VALUE(value))
> break;
> - }
>
> if (count > POLLING_LLT_THRESHOLD) {
> RT_TRACE(_module_hal_init_c_, _drv_err_,
> @@ -1174,16 +1169,14 @@ int InitLLTTable23a(struct rtw_adapter *padapter, u32 boundary)
>
> for (i = 0; i < (txpktbuf_bndy - 1); i++) {
> status = _LLTWrite(padapter, i, i + 1);
> - if (status != _SUCCESS) {
> + if (status != _SUCCESS)
> return status;
> - }
> }
>
> /* end of list */
> status = _LLTWrite(padapter, (txpktbuf_bndy - 1), 0xFF);
> - if (status != _SUCCESS) {
> + if (status != _SUCCESS)
> return status;
> - }
>
> /* Make the other pages as ring buffer */
> /* This ring buffer is used as beacon buffer if we config this
> @@ -1191,16 +1184,14 @@ int InitLLTTable23a(struct rtw_adapter *padapter, u32 boundary)
> /* Otherwise used as local loopback buffer. */
> for (i = txpktbuf_bndy; i < Last_Entry_Of_TxPktBuf; i++) {
> status = _LLTWrite(padapter, i, (i + 1));
> - if (_SUCCESS != status) {
> + if (_SUCCESS != status)
> return status;
> - }
> }
>
> /* Let last entry point to the start entry of ring buffer */
> status = _LLTWrite(padapter, Last_Entry_Of_TxPktBuf, txpktbuf_bndy);
> - if (status != _SUCCESS) {
> + if (status != _SUCCESS)
> return status;
> - }
>
> return status;
> }
> @@ -1435,9 +1426,9 @@ static void _DisableAnalog(struct rtw_adapter *padapter, bool bWithoutHWSM)
> /* HW Auto state machine */
> int CardDisableHWSM(struct rtw_adapter *padapter, u8 resetMCU)
> {
> - if (padapter->bSurpriseRemoved) {
> + if (padapter->bSurpriseRemoved)
> return _SUCCESS;
> - }
> +
> /* RF Off Sequence ==== */
> _DisableRFAFEAndResetBB8192C(padapter);
>
> @@ -1459,9 +1450,8 @@ int CardDisableHWSM(struct rtw_adapter *padapter, u8 resetMCU)
> /* without HW Auto state machine */
> int CardDisableWithoutHWSM(struct rtw_adapter *padapter)
> {
> - if (padapter->bSurpriseRemoved) {
> + if (padapter->bSurpriseRemoved)
> return _SUCCESS;
> - }
>
> /* RF Off Sequence ==== */
> _DisableRFAFEAndResetBB8192C(padapter);
> @@ -1875,9 +1865,8 @@ static void rtl8723a_cal_txdesc_chksum(struct tx_desc *ptxdesc)
> /* Clear first */
> ptxdesc->txdw7 &= cpu_to_le32(0xffff0000);
>
> - for (index = 0; index < count; index++) {
> + for (index = 0; index < count; index++)
> checksum ^= le16_to_cpu(*(usPtr + index));
> - }
>
> ptxdesc->txdw7 |= cpu_to_le32(checksum & 0x0000ffff);
> }
> @@ -1925,9 +1914,8 @@ void rtl8723a_fill_fake_txdesc(struct rtw_adapter *padapter, u8 *pDesc,
> ptxdesc->txdw3 |= cpu_to_le32((8 << 28));
> }
>
> - if (true == IsBTQosNull) {
> + if (true == IsBTQosNull)
> ptxdesc->txdw2 |= cpu_to_le32(BIT(23)); /* BT NULL */
> - }
>
> /* offset 16 */
> ptxdesc->txdw4 |= cpu_to_le32(BIT(8)); /* driver uses rate */
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
