Fix all checkpatch "braces {} are not necessary" warnings for
rtl8723au/hal/rtl8723a_hal_init.c
Signed-off-by: Daniele Alessandrelli <daniele.alessandrelli@xxxxxxxxx>
---
drivers/staging/rtl8723au/hal/rtl8723a_hal_init.c | 40 ++++++++---------------
1 file changed, 14 insertions(+), 26 deletions(-)
diff --git a/drivers/staging/rtl8723au/hal/rtl8723a_hal_init.c b/drivers/staging/rtl8723au/hal/rtl8723a_hal_init.c
index a5eadd4..e88d851 100644
--- a/drivers/staging/rtl8723au/hal/rtl8723a_hal_init.c
+++ b/drivers/staging/rtl8723au/hal/rtl8723a_hal_init.c
@@ -424,9 +424,8 @@ hal_ReadEFuse_WiFi(struct rtw_adapter *padapter,
offset = GET_HDR_OFFSET_2_0(efuseHeader);
ReadEFuseByte23a(padapter, eFuse_Addr++, &efuseExtHdr);
- if (ALL_WORDS_DISABLED(efuseExtHdr)) {
+ if (ALL_WORDS_DISABLED(efuseExtHdr))
continue;
- }
offset |= ((efuseExtHdr & 0xF0) >> 1);
wden = (efuseExtHdr & 0x0F);
@@ -524,9 +523,8 @@ hal_ReadEFuse_BT(struct rtw_adapter *padapter,
ReadEFuseByte23a(padapter, eFuse_Addr++,
&efuseExtHdr);
- if (ALL_WORDS_DISABLED(efuseExtHdr)) {
+ if (ALL_WORDS_DISABLED(efuseExtHdr))
continue;
- }
offset |= ((efuseExtHdr & 0xF0) >> 1);
wden = (efuseExtHdr & 0x0F);
@@ -630,9 +628,8 @@ u16 rtl8723a_EfuseGetCurrentSize_WiFi(struct rtw_adapter *padapter)
hoffset = GET_HDR_OFFSET_2_0(efuse_data);
efuse_addr++;
efuse_OneByteRead23a(padapter, efuse_addr, &efuse_data);
- if (ALL_WORDS_DISABLED(efuse_data)) {
+ if (ALL_WORDS_DISABLED(efuse_data))
continue;
- }
hoffset |= ((efuse_data & 0xF0) >> 1);
hworden = efuse_data & 0x0F;
@@ -721,9 +718,8 @@ u16 rtl8723a_EfuseGetCurrentSize_BT(struct rtw_adapter *padapter)
}
/* Check if we need to check next bank efuse */
- if (efuse_addr < retU2) {
+ if (efuse_addr < retU2)
break; /* don't need to check next bank. */
- }
}
retU2 = ((bank - 1) * EFUSE_BT_REAL_BANK_CONTENT_LEN) + efuse_addr;
@@ -1149,9 +1145,8 @@ static int _LLTWrite(struct rtw_adapter *padapter, u32 address, u32 data)
/* polling */
do {
value = rtl8723au_read32(padapter, LLTReg);
- if (_LLT_NO_ACTIVE == _LLT_OP_VALUE(value)) {
+ if (_LLT_NO_ACTIVE == _LLT_OP_VALUE(value))
break;
- }
if (count > POLLING_LLT_THRESHOLD) {
RT_TRACE(_module_hal_init_c_, _drv_err_,
@@ -1174,16 +1169,14 @@ int InitLLTTable23a(struct rtw_adapter *padapter, u32 boundary)
for (i = 0; i < (txpktbuf_bndy - 1); i++) {
status = _LLTWrite(padapter, i, i + 1);
- if (status != _SUCCESS) {
+ if (status != _SUCCESS)
return status;
- }
}
/* end of list */
status = _LLTWrite(padapter, (txpktbuf_bndy - 1), 0xFF);
- if (status != _SUCCESS) {
+ if (status != _SUCCESS)
return status;
- }
/* Make the other pages as ring buffer */
/* This ring buffer is used as beacon buffer if we config this
@@ -1191,16 +1184,14 @@ int InitLLTTable23a(struct rtw_adapter *padapter, u32 boundary)
/* Otherwise used as local loopback buffer. */
for (i = txpktbuf_bndy; i < Last_Entry_Of_TxPktBuf; i++) {
status = _LLTWrite(padapter, i, (i + 1));
- if (_SUCCESS != status) {
+ if (_SUCCESS != status)
return status;
- }
}
/* Let last entry point to the start entry of ring buffer */
status = _LLTWrite(padapter, Last_Entry_Of_TxPktBuf, txpktbuf_bndy);
- if (status != _SUCCESS) {
+ if (status != _SUCCESS)
return status;
- }
return status;
}
@@ -1435,9 +1426,9 @@ static void _DisableAnalog(struct rtw_adapter *padapter, bool bWithoutHWSM)
/* HW Auto state machine */
int CardDisableHWSM(struct rtw_adapter *padapter, u8 resetMCU)
{
- if (padapter->bSurpriseRemoved) {
+ if (padapter->bSurpriseRemoved)
return _SUCCESS;
- }
+
/* RF Off Sequence ==== */
_DisableRFAFEAndResetBB8192C(padapter);
@@ -1459,9 +1450,8 @@ int CardDisableHWSM(struct rtw_adapter *padapter, u8 resetMCU)
/* without HW Auto state machine */
int CardDisableWithoutHWSM(struct rtw_adapter *padapter)
{
- if (padapter->bSurpriseRemoved) {
+ if (padapter->bSurpriseRemoved)
return _SUCCESS;
- }
/* RF Off Sequence ==== */
_DisableRFAFEAndResetBB8192C(padapter);
@@ -1875,9 +1865,8 @@ static void rtl8723a_cal_txdesc_chksum(struct tx_desc *ptxdesc)
/* Clear first */
ptxdesc->txdw7 &= cpu_to_le32(0xffff0000);
- for (index = 0; index < count; index++) {
+ for (index = 0; index < count; index++)
checksum ^= le16_to_cpu(*(usPtr + index));
- }
ptxdesc->txdw7 |= cpu_to_le32(checksum & 0x0000ffff);
}
@@ -1925,9 +1914,8 @@ void rtl8723a_fill_fake_txdesc(struct rtw_adapter *padapter, u8 *pDesc,
ptxdesc->txdw3 |= cpu_to_le32((8 << 28));
}
- if (true == IsBTQosNull) {
+ if (true == IsBTQosNull)
ptxdesc->txdw2 |= cpu_to_le32(BIT(23)); /* BT NULL */
- }
/* offset 16 */
ptxdesc->txdw4 |= cpu_to_le32(BIT(8)); /* driver uses rate */
--
1.8.3.2
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
