From: Matteo Semenzato <mattew8898@xxxxxxxxx> This patch fixes the following errors: ERROR: space required after that ',' ERROR: trailing whitespace Signed-off-by: Matteo Semenzato <mattew8898@xxxxxxxxx> --- drivers/staging/fbtft/fb_upd161704.c | 90 ++++++++++++++++++------------------ 1 file changed, 45 insertions(+), 45 deletions(-) diff --git a/drivers/staging/fbtft/fb_upd161704.c b/drivers/staging/fbtft/fb_upd161704.c index fff57b3..176c210 100644 --- a/drivers/staging/fbtft/fb_upd161704.c +++ b/drivers/staging/fbtft/fb_upd161704.c @@ -47,84 +47,84 @@ static int init_display(struct fbtft_par *par) /* Initialization sequence from Lib_UTFT */ /* register reset */ - write_reg(par, 0x0003,0x0001); /* Soft reset */ + write_reg(par, 0x0003, 0x0001); /* Soft reset */ /* oscillator start */ - write_reg(par, 0x003A,0x0001); /*Oscillator 0: stop, 1: operation */ + write_reg(par, 0x003A, 0x0001); /*Oscillator 0: stop, 1: operation */ udelay(100); /* y-setting */ - write_reg(par, 0x0024,0x007B); /* amplitude setting */ + write_reg(par, 0x0024, 0x007B); /* amplitude setting */ udelay(10); - write_reg(par, 0x0025,0x003B); /* amplitude setting */ - write_reg(par, 0x0026,0x0034); /* amplitude setting */ + write_reg(par, 0x0025, 0x003B); /* amplitude setting */ + write_reg(par, 0x0026, 0x0034); /* amplitude setting */ udelay(10); - write_reg(par, 0x0027,0x0004); /* amplitude setting */ - write_reg(par, 0x0052,0x0025); /* circuit setting 1 */ + write_reg(par, 0x0027, 0x0004); /* amplitude setting */ + write_reg(par, 0x0052, 0x0025); /* circuit setting 1 */ udelay(10); - write_reg(par, 0x0053,0x0033); /* circuit setting 2 */ - write_reg(par, 0x0061,0x001C); /* adjustment V10 positive polarity */ + write_reg(par, 0x0053, 0x0033); /* circuit setting 2 */ + write_reg(par, 0x0061, 0x001C); /* adjustment V10 positive polarity */ udelay(10); - write_reg(par, 0x0062,0x002C); /* adjustment V9 negative polarity */ - write_reg(par, 0x0063,0x0022); /* adjustment V34 positive polarity */ + write_reg(par, 0x0062, 0x002C); /* adjustment V9 negative polarity */ + write_reg(par, 0x0063, 0x0022); /* adjustment V34 positive polarity */ udelay(10); - write_reg(par, 0x0064,0x0027); /* adjustment V31 negative polarity */ + write_reg(par, 0x0064, 0x0027); /* adjustment V31 negative polarity */ udelay(10); - write_reg(par, 0x0065,0x0014); /* adjustment V61 negative polarity */ + write_reg(par, 0x0065, 0x0014); /* adjustment V61 negative polarity */ udelay(10); - write_reg(par, 0x0066,0x0010); /* adjustment V61 negative polarity */ - + write_reg(par, 0x0066, 0x0010); /* adjustment V61 negative polarity */ + /* Basical clock for 1 line (BASECOUNT[7:0]) number specified */ - write_reg(par, 0x002E,0x002D); - + write_reg(par, 0x002E, 0x002D); + /* Power supply setting */ - write_reg(par, 0x0019,0x0000); /* DC/DC output setting */ + write_reg(par, 0x0019, 0x0000); /* DC/DC output setting */ udelay(200); - write_reg(par, 0x001A,0x1000); /* DC/DC frequency setting */ - write_reg(par, 0x001B,0x0023); /* DC/DC rising setting */ - write_reg(par, 0x001C,0x0C01); /* Regulator voltage setting */ - write_reg(par, 0x001D,0x0000); /* Regulator current setting */ - write_reg(par, 0x001E,0x0009); /* VCOM output setting */ - write_reg(par, 0x001F,0x0035); /* VCOM amplitude setting */ - write_reg(par, 0x0020,0x0015); /* VCOMM cencter setting */ - write_reg(par, 0x0018,0x1E7B); /* DC/DC operation setting */ + write_reg(par, 0x001A, 0x1000); /* DC/DC frequency setting */ + write_reg(par, 0x001B, 0x0023); /* DC/DC rising setting */ + write_reg(par, 0x001C, 0x0C01); /* Regulator voltage setting */ + write_reg(par, 0x001D, 0x0000); /* Regulator current setting */ + write_reg(par, 0x001E, 0x0009); /* VCOM output setting */ + write_reg(par, 0x001F, 0x0035); /* VCOM amplitude setting */ + write_reg(par, 0x0020, 0x0015); /* VCOMM cencter setting */ + write_reg(par, 0x0018, 0x1E7B); /* DC/DC operation setting */ /* windows setting */ - write_reg(par, 0x0008,0x0000); /* Minimum X address */ - write_reg(par, 0x0009,0x00EF); /* Maximum X address */ - write_reg(par, 0x000a,0x0000); /* Minimum Y address */ - write_reg(par, 0x000b,0x013F); /* Maximum Y address */ + write_reg(par, 0x0008, 0x0000); /* Minimum X address */ + write_reg(par, 0x0009, 0x00EF); /* Maximum X address */ + write_reg(par, 0x000a, 0x0000); /* Minimum Y address */ + write_reg(par, 0x000b, 0x013F); /* Maximum Y address */ /* LCD display area setting */ - write_reg(par, 0x0029,0x0000); /* [LCDSIZE] X MIN. size set */ - write_reg(par, 0x002A,0x0000); /* [LCDSIZE] Y MIN. size set */ - write_reg(par, 0x002B,0x00EF); /* [LCDSIZE] X MAX. size set */ - write_reg(par, 0x002C,0x013F); /* [LCDSIZE] Y MAX. size set */ + write_reg(par, 0x0029, 0x0000); /* [LCDSIZE] X MIN. size set */ + write_reg(par, 0x002A, 0x0000); /* [LCDSIZE] Y MIN. size set */ + write_reg(par, 0x002B, 0x00EF); /* [LCDSIZE] X MAX. size set */ + write_reg(par, 0x002C, 0x013F); /* [LCDSIZE] Y MAX. size set */ /* Gate scan setting */ - write_reg(par, 0x0032,0x0002); - + write_reg(par, 0x0032, 0x0002); + /* n line inversion line number */ - write_reg(par, 0x0033,0x0000); + write_reg(par, 0x0033, 0x0000); /* Line inversion/frame inversion/interlace setting */ - write_reg(par, 0x0037,0x0000); - + write_reg(par, 0x0037, 0x0000); + /* Gate scan operation setting register */ - write_reg(par, 0x003B,0x0001); - + write_reg(par, 0x003B, 0x0001); + /* Color mode */ /*GS = 0: 260-k color (64 gray scale), GS = 1: 8 color (2 gray scale) */ - write_reg(par, 0x0004,0x0000); + write_reg(par, 0x0004, 0x0000); /* RAM control register */ - write_reg(par, 0x0005,0x0000); /*Window access 00:Normal, 10:Window */ + write_reg(par, 0x0005, 0x0000); /*Window access 00:Normal, 10:Window */ /* Display setting register 2 */ - write_reg(par, 0x0001,0x0000); + write_reg(par, 0x0001, 0x0000); /* display setting */ - write_reg(par, 0x0000,0x0000); /* display on */ + write_reg(par, 0x0000, 0x0000); /* display on */ return 0; } -- 2.3.0 _______________________________________________ devel mailing list devel@xxxxxxxxxxxxxxxxxxxxxx http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
