On Wed, 26 Feb 2020 at 20:21, Vladimir Oltean <olteanv@xxxxxxxxx> wrote: > > On Wed, 26 Feb 2020 at 15:36, Russell King - ARM Linux admin > <linux@xxxxxxxxxxxxxxx> wrote: > > > > > > dpaa2 is complicated by the firmware, and that we can't switch the > > interface mode between (SGMII,1000base-X) and 10G. > > > > If the firmware is in "DPMAC_LINK_TYPE_PHY" mode, it expects to be told > > the current link parameters via the dpmac_set_link_state() call - it > > isn't clear whether that needs to be called for other modes with the > > up/down state (firmware API documentation is poor.) > > > > With PCS control in Linux, I am pretty sure that you don't want > anything other than DPMAC_LINK_TYPE_PHY anyway. > Basically in DPMAC_LINK_TYPE_FIXED, the MC firmware is in control of > the PCS and polls its link state to emit link notifications to objects > connected to the DPMAC. So Linux control of PCS would class with s/class/clash/ > firmware control of the PCS, leading to undesirable side-effects to > say the least. > > > -- > > RMK's Patch system: https://www.armlinux.org.uk/developer/patches/ > > FTTC broadband for 0.8mile line in suburbia: sync at 12.1Mbps down 622kbps up > > According to speedtest.net: 11.9Mbps down 500kbps up > > Regards, > -Vladimir
