On Thu, Aug 22, 2013 at 10:56:17AM +0100, Lars Poeschel wrote:
> From: Lars Poeschel <poeschel@xxxxxxxxxxx>
>
> The device tree property should be more descriptive.
> microchip seems more reasonable than mcp. As there are no
> in tree users of this property, so the rename can still be
> done without pain.
Are there definitely no users? I see there are no dts with a
"mcp,mcp23***" compatible string, but are there any boards already out
there with this hardware that someone might be using and a currently
release kernel supports?
With the bcm/broadcom => brcm change, we marked the old vendor prefix as
deprecated (but left the support code).
If we can 100% guarantee no-one's using the compatible string, I'm happy
to change it. Otherwise we just have to mark the old string as
deprecated.
Thanks,
Mark.
>
> Signed-off-by: Lars Poeschel <poeschel@xxxxxxxxxxx>
> ---
> .../devicetree/bindings/gpio/gpio-mcp23s08.txt | 16 ++++++++--------
> drivers/gpio/gpio-mcp23s08.c | 14 +++++++++-----
> 2 files changed, 17 insertions(+), 13 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/gpio/gpio-mcp23s08.txt b/Documentation/devicetree/bindings/gpio/gpio-mcp23s08.txt
> index 629d0ef..f207b7c 100644
> --- a/Documentation/devicetree/bindings/gpio/gpio-mcp23s08.txt
> +++ b/Documentation/devicetree/bindings/gpio/gpio-mcp23s08.txt
> @@ -3,10 +3,10 @@ Microchip MCP2308/MCP23S08/MCP23017/MCP23S17 driver for
>
> Required properties:
> - compatible : Should be
> - - "mcp,mcp23s08" for 8 GPIO SPI version
> - - "mcp,mcp23s17" for 16 GPIO SPI version
> - - "mcp,mcp23008" for 8 GPIO I2C version or
> - - "mcp,mcp23017" for 16 GPIO I2C version of the chip
> + - "microchip,mcp23s08" for 8 GPIO SPI version
> + - "microchip,mcp23s17" for 16 GPIO SPI version
> + - "microchip,mcp23008" for 8 GPIO I2C version or
> + - "microchip,mcp23017" for 16 GPIO I2C version of the chip
> - #gpio-cells : Should be two.
> - first cell is the pin number
> - second cell is used to specify flags. Flags are currently unused.
> @@ -15,10 +15,10 @@ Required properties:
> SPI uses this to specify the chipselect line which the chip is
> connected to. The driver and the SPI variant of the chip support
> multiple chips on the same chipselect. Have a look at
> - mcp,spi-present-mask below.
> + microchip,spi-present-mask below.
>
> Required device specific properties (only for SPI chips):
> -- mcp,spi-present-mask : This is a present flag, that makes only sense for SPI
> +- microchip,spi-present-mask : This is a present flag, that makes only sense for SPI
> chips - as the name suggests. Multiple SPI chips can share the same
> SPI chipselect. Set a bit in bit0-7 in this mask to 1 if there is a
> chip connected with the corresponding spi address set. For example if
> @@ -30,7 +30,7 @@ Required device specific properties (only for SPI chips):
>
> Example I2C:
> gpiom1: gpio@20 {
> - compatible = "mcp,mcp23017";
> + compatible = "microchip,mcp23017";
> gpio-controller;
> #gpio-cells = <2>;
> reg = <0x20>;
> @@ -38,7 +38,7 @@ gpiom1: gpio@20 {
>
> Example SPI:
> gpiom1: gpio@0 {
> - compatible = "mcp,mcp23s17";
> + compatible = "microchip,mcp23s17";
> gpio-controller;
> #gpio-cells = <2>;
> spi-present-mask = <0x01>;
> diff --git a/drivers/gpio/gpio-mcp23s08.c b/drivers/gpio/gpio-mcp23s08.c
> index 6a4470b..73cf236 100644
> --- a/drivers/gpio/gpio-mcp23s08.c
> +++ b/drivers/gpio/gpio-mcp23s08.c
> @@ -483,10 +483,12 @@ fail:
> #ifdef CONFIG_SPI_MASTER
> static struct of_device_id mcp23s08_spi_of_match[] = {
> {
> - .compatible = "mcp,mcp23s08", .data = (void *) MCP_TYPE_S08,
> + .compatible = "microchip,mcp23s08",
> + .data = (void *) MCP_TYPE_S08,
> },
> {
> - .compatible = "mcp,mcp23s17", .data = (void *) MCP_TYPE_S17,
> + .compatible = "microchip,mcp23s17",
> + .data = (void *) MCP_TYPE_S17,
> },
> { },
> };
> @@ -496,10 +498,12 @@ MODULE_DEVICE_TABLE(of, mcp23s08_spi_of_match);
> #if IS_ENABLED(CONFIG_I2C)
> static struct of_device_id mcp23s08_i2c_of_match[] = {
> {
> - .compatible = "mcp,mcp23008", .data = (void *) MCP_TYPE_008,
> + .compatible = "microchip,mcp23008",
> + .data = (void *) MCP_TYPE_008,
> },
> {
> - .compatible = "mcp,mcp23017", .data = (void *) MCP_TYPE_017,
> + .compatible = "microchip,mcp23017",
> + .data = (void *) MCP_TYPE_017,
> },
> { },
> };
> @@ -621,7 +625,7 @@ static int mcp23s08_probe(struct spi_device *spi)
> if (match) {
> type = (int)match->data;
> status = of_property_read_u32(spi->dev.of_node,
> - "mcp,spi-present-mask", &spi_present_mask);
> + "microchip,spi-present-mask", &spi_present_mask);
> if (status) {
> dev_err(&spi->dev, "DT has no spi-present-mask\n");
> return -ENODEV;
> --
> 1.7.10.4
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
