Did a grep for 'coordiante' and replaced them all with 'coordinate'
Signed-off-by: Zubair Lutfullah <zubair.lutfullah@xxxxxxxxx>
Acked-by: Lee Jones <lee.jones@xxxxxxxxxx>
---
.../bindings/input/touchscreen/ti-tsc-adc.txt | 4 ++--
arch/arm/boot/dts/am335x-evm.dts | 2 +-
drivers/input/touchscreen/ti_am335x_tsc.c | 2 +-
drivers/mfd/ti_am335x_tscadc.c | 2 +-
4 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/Documentation/devicetree/bindings/input/touchscreen/ti-tsc-adc.txt b/Documentation/devicetree/bindings/input/touchscreen/ti-tsc-adc.txt
index 491c97b..3e22aec 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/ti-tsc-adc.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/ti-tsc-adc.txt
@@ -6,7 +6,7 @@ Required properties:
ti,wires: Wires refer to application modes i.e. 4/5/8 wire touchscreen
support on the platform.
ti,x-plate-resistance: X plate resistance
- ti,coordiante-readouts: The sequencer supports a total of 16
+ ti,coordinate-readouts: The sequencer supports a total of 16
programmable steps each step is used to
read a single coordinate. A single
readout is enough but multiple reads can
@@ -34,7 +34,7 @@ Example:
tsc {
ti,wires = <4>;
ti,x-plate-resistance = <200>;
- ti,coordiante-readouts = <5>;
+ ti,coordinate-readouts = <5>;
ti,wire-config = <0x00 0x11 0x22 0x33>;
};
diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
index 0fa4c7f..e50b781 100644
--- a/arch/arm/boot/dts/am335x-evm.dts
+++ b/arch/arm/boot/dts/am335x-evm.dts
@@ -250,7 +250,7 @@
tsc {
ti,wires = <4>;
ti,x-plate-resistance = <200>;
- ti,coordiante-readouts = <5>;
+ ti,coordinate-readouts = <5>;
ti,wire-config = <0x00 0x11 0x22 0x33>;
};
diff --git a/drivers/input/touchscreen/ti_am335x_tsc.c b/drivers/input/touchscreen/ti_am335x_tsc.c
index 0e9f02a..6422f65 100644
--- a/drivers/input/touchscreen/ti_am335x_tsc.c
+++ b/drivers/input/touchscreen/ti_am335x_tsc.c
@@ -348,7 +348,7 @@ static int titsc_parse_dt(struct platform_device *pdev,
if (err < 0)
return err;
- err = of_property_read_u32(node, "ti,coordiante-readouts",
+ err = of_property_read_u32(node, "ti,coordinate-readouts",
&ts_dev->coordinate_readouts);
if (err < 0)
return err;
diff --git a/drivers/mfd/ti_am335x_tscadc.c b/drivers/mfd/ti_am335x_tscadc.c
index cd74d59..1686ae6 100644
--- a/drivers/mfd/ti_am335x_tscadc.c
+++ b/drivers/mfd/ti_am335x_tscadc.c
@@ -106,7 +106,7 @@ static int ti_tscadc_probe(struct platform_device *pdev)
node = of_get_child_by_name(pdev->dev.of_node, "tsc");
of_property_read_u32(node, "ti,wires", &tsc_wires);
- of_property_read_u32(node, "ti,coordiante-readouts", &readouts);
+ of_property_read_u32(node, "ti,coordinate-readouts", &readouts);
node = of_get_child_by_name(pdev->dev.of_node, "adc");
of_property_for_each_u32(node, "ti,adc-channels", prop, cur, val) {
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
