Currently, userland has no method to query which timestamping features are supported by the kvaser_pciefd driver (aside maybe of getting RX messages and obseverse whever or not hardware timestamps stay at zero). The canonical way for a network driver to advertise what kind of timestamping it supports is to implement ethtool_ops::get_ts_info(). Here, we use the CAN specific can_ethtool_op_get_ts_info_hwts() function to achieve this. In addition, the driver currently does not support the hardware timestamps ioctls. According to [1], SIOCSHWTSTAMP is "must" and SIOCGHWTSTAMP is "should". This patch fills up that gap by implementing net_device_ops::ndo_eth_ioctl() using the CAN specific function can_eth_ioctl_hwts(). [1] kernel doc Timestamping, section 3.1: "Hardware Timestamping Implementation: Device Drivers" Link: https://docs.kernel.org/networking/timestamping.html#hardware-timestamping-implementation-device-drivers CC: Jimmy Assarsson <extja@xxxxxxxxxx> Signed-off-by: Vincent Mailhol <mailhol.vincent@xxxxxxxxxx> --- drivers/net/can/kvaser_pciefd.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/net/can/kvaser_pciefd.c b/drivers/net/can/kvaser_pciefd.c index dcd2c9d50d5e..ed54c0b3c7d4 100644 --- a/drivers/net/can/kvaser_pciefd.c +++ b/drivers/net/can/kvaser_pciefd.c @@ -9,6 +9,7 @@ #include <linux/kernel.h> #include <linux/module.h> #include <linux/device.h> +#include <linux/ethtool.h> #include <linux/pci.h> #include <linux/can/dev.h> #include <linux/timer.h> @@ -919,10 +920,15 @@ static void kvaser_pciefd_bec_poll_timer(struct timer_list *data) static const struct net_device_ops kvaser_pciefd_netdev_ops = { .ndo_open = kvaser_pciefd_open, .ndo_stop = kvaser_pciefd_stop, + .ndo_eth_ioctl = can_eth_ioctl_hwts, .ndo_start_xmit = kvaser_pciefd_start_xmit, .ndo_change_mtu = can_change_mtu, }; +static const struct ethtool_ops kvaser_pciefd_ethtool_ops = { + .get_ts_info = can_ethtool_op_get_ts_info_hwts, +}; + static int kvaser_pciefd_setup_can_ctrls(struct kvaser_pciefd *pcie) { int i; @@ -939,6 +945,7 @@ static int kvaser_pciefd_setup_can_ctrls(struct kvaser_pciefd *pcie) can = netdev_priv(netdev); netdev->netdev_ops = &kvaser_pciefd_netdev_ops; + netdev->ethtool_ops = &kvaser_pciefd_ethtool_ops; can->reg_base = pcie->reg_base + KVASER_PCIEFD_KCAN0_BASE + i * KVASER_PCIEFD_KCAN_BASE_OFFSET; -- 2.35.1
