Currently, userland has no method to query which timestamping features are supported by the etas_es58x driver (aside maybe of getting RX messages and obseverse whever or not hardware timestamps stay at zero). The canonical way for a network driver to advertise what kind of timestamping is supports is to implement ethtool_ops::get_ts_info(). Here, we use the CAN specific can_ethtool_op_get_ts_info_hwts() function to achieve this. In addition, the driver currently does not support the hardware timestamps ioctls. According to [1], SIOCSHWTSTAMP is "must" and SIOCGHWTSTAMP is "should". This patch fills up that gap by implementing net_device_ops::ndo_eth_ioctl() using the CAN specific function can_eth_ioctl_hwts(). [1] kernel doc Timestamping, section 3.1: "Hardware Timestamping Implementation: Device Drivers" Link: https://docs.kernel.org/networking/timestamping.html#hardware-timestamping-implementation-device-drivers Signed-off-by: Vincent Mailhol <mailhol.vincent@xxxxxxxxxx> --- drivers/net/can/usb/etas_es58x/es58x_core.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/drivers/net/can/usb/etas_es58x/es58x_core.c b/drivers/net/can/usb/etas_es58x/es58x_core.c index 7353745f92d7..5e2585c85500 100644 --- a/drivers/net/can/usb/etas_es58x/es58x_core.c +++ b/drivers/net/can/usb/etas_es58x/es58x_core.c @@ -10,6 +10,7 @@ * Copyright (c) 2020, 2021 Vincent Mailhol <mailhol.vincent@xxxxxxxxxx> */ +#include <linux/ethtool.h> #include <linux/kernel.h> #include <linux/module.h> #include <linux/usb.h> @@ -1981,7 +1982,12 @@ static netdev_tx_t es58x_start_xmit(struct sk_buff *skb, static const struct net_device_ops es58x_netdev_ops = { .ndo_open = es58x_open, .ndo_stop = es58x_stop, - .ndo_start_xmit = es58x_start_xmit + .ndo_start_xmit = es58x_start_xmit, + .ndo_eth_ioctl = can_eth_ioctl_hwts, +}; + +static const struct ethtool_ops es58x_ethtool_ops = { + .get_ts_info = can_ethtool_op_get_ts_info_hwts, }; /** @@ -2088,6 +2094,7 @@ static int es58x_init_netdev(struct es58x_device *es58x_dev, int channel_idx) es58x_init_priv(es58x_dev, es58x_priv(netdev), channel_idx); netdev->netdev_ops = &es58x_netdev_ops; + netdev->ethtool_ops = &es58x_ethtool_ops; netdev->flags |= IFF_ECHO; /* We support local echo */ netdev->dev_port = channel_idx; -- 2.35.1
