Yasushi reported, that his Microchip CAN Analyzer stopped working since
commit 91c02557174b ("can: mcba_usb: fix memory leak in mcba_usb").
The problem was in missing urb->transfer_dma initialization.
In my previous patch to this driver I refactored mcba_usb_start() code to
avoid leaking usb coherent buffers. To achive it, I passed local stack
variable to usb_alloc_coherent() and then saved it to private array to
correctly free all coherent buffers on ->close() call. But I forgot to
inialize urb->transfer_dma with variable passed to usb_alloc_coherent().
All of this was causing device to not work, since dma addr 0 is not valid
and following log can be found on bug report page, which points exactly to
problem described above.
[ 33.862175] DMAR: [DMA Write] Request device [00:14.0] PASID ffffffff fault addr 0 [fault reason 05] PTE Write access is not set
Bug report: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=990850
Reported-by: Yasushi SHOJI <yasushi.shoji@xxxxxxxxx>
Fixes: 91c02557174b ("can: mcba_usb: fix memory leak in mcba_usb")
Signed-off-by: Pavel Skripkin <paskripkin@xxxxxxxxx>
---
drivers/net/can/usb/mcba_usb.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/net/can/usb/mcba_usb.c b/drivers/net/can/usb/mcba_usb.c
index a45865bd7254..a1a154c08b7f 100644
--- a/drivers/net/can/usb/mcba_usb.c
+++ b/drivers/net/can/usb/mcba_usb.c
@@ -653,6 +653,8 @@ static int mcba_usb_start(struct mcba_priv *priv)
break;
}
+ urb->transfer_dma = buf_dma;
+
usb_fill_bulk_urb(urb, priv->udev,
usb_rcvbulkpipe(priv->udev, MCBA_USB_EP_IN),
buf, MCBA_USB_RX_BUFF_SIZE,
--
2.32.0
