On Mon, May 10, 2021 at 08:18:07PM +0200, Marc Kleine-Budde wrote:
> I have a git feeling that I've found the problem. Can you revert
> e940e0895a82 ("can: skb: can_skb_set_owner(): fix ref counting if socket
> was closed before setting skb ownership") and check if that fixes your
> problem? This might trigger the problem described in the patch:
>
> | WARNING: CPU: 0 PID: 280 at lib/refcount.c:25 refcount_warn_saturate+0x114/0x134
> | refcount_t: addition on 0; use-after-free.
> | Modules linked in: coda_vpu(E) v4l2_jpeg(E) videobuf2_vmalloc(E) imx_vdoa(E)
> | CPU: 0 PID: 280 Comm: test_can.sh Tainted: G E 5.11.0-04577-gf8ff6603c617 #203
> | Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree)
> | Backtrace:
> | [<80bafea4>] (dump_backtrace) from [<80bb0280>] (show_stack+0x20/0x24) r7:00000000 r6:600f0113 r5:00000000 r4:81441220
> | [<80bb0260>] (show_stack) from [<80bb593c>] (dump_stack+0xa0/0xc8)
> | [<80bb589c>] (dump_stack) from [<8012b268>] (__warn+0xd4/0x114) r9:00000019 r8:80f4a8c2 r7:83e4150c r6:00000000 r5:00000009 r4:80528f90
> | [<8012b194>] (__warn) from [<80bb09c4>] (warn_slowpath_fmt+0x88/0xc8) r9:83f26400 r8:80f4a8d1 r7:00000009 r6:80528f90 r5:00000019 r4:80f4a8c2
> | [<80bb0940>] (warn_slowpath_fmt) from [<80528f90>] (refcount_warn_saturate+0x114/0x134) r8:00000000 r7:00000000 r6:82b44000 r5:834e5600 r4:83f4d540
> | [<80528e7c>] (refcount_warn_saturate) from [<8079a4c8>] (__refcount_add.constprop.0+0x4c/0x50)
> | [<8079a47c>] (__refcount_add.constprop.0) from [<8079a57c>] (can_put_echo_skb+0xb0/0x13c)
> | [<8079a4cc>] (can_put_echo_skb) from [<8079ba98>] (flexcan_start_xmit+0x1c4/0x230) r9:00000010 r8:83f48610 r7:0fdc0000 r6:0c080000 r5:82b44000 r4:834e5600
> | [<8079b8d4>] (flexcan_start_xmit) from [<80969078>] (netdev_start_xmit+0x44/0x70) r9:814c0ba0 r8:80c8790c r7:00000000 r6:834e5600 r5:82b44000 r4:82ab1f00
> | [<80969034>] (netdev_start_xmit) from [<809725a4>] (dev_hard_start_xmit+0x19c/0x318) r9:814c0ba0 r8:00000000 r7:82ab1f00 r6:82b44000 r5:00000000 r4:834e5600
> | [<80972408>] (dev_hard_start_xmit) from [<809c6584>] (sch_direct_xmit+0xcc/0x264) r10:834e5600 r9:00000000 r8:00000000 r7:82b44000 r6:82ab1f00 r5:834e5600 r4:83f27400
> | [<809c64b8>] (sch_direct_xmit) from [<809c6c0c>] (__qdisc_run+0x4f0/0x534)
>
> Can you give me feedback if
> 1. the revert "fixes" your problem
> 2. the revert triggers the above backtrace
Always trust your git, it seems... I can confirm this revert both
'fixes' the problem and triggers that backtrace originating from
m_can_tx_handler. I got two of those backtraces during the run, and
sandwiched between them a backtrace from the rx path:
| WARNING: CPU: 2 PID: 22 at lib/refcount.c:28 refcount_warn_saturate+0x13c/0x174
| refcount_t: underflow; use-after-free.
| Modules linked in: can_raw can sha256_generic cfg80211 rfkill 8021q garp stp llc tcan4x5x m_can can_dev spidev v3d raspberrypi_hwmon vc4 gpu_sched cec i2c_bcm2835 bcm2835_isp(C) drm_kms_helper spi_bcm2835 bcm2835_codec(C) v4l2_mem2mem bcm2835_v4l2(C) bcm2835_mmal_vchiq(C) videobuf2_vmalloc videobuf2_dma_contig videobuf2_memops videobuf2_v4l2 videobuf2_common videodev snd_bcm2835(C) mc vc_sm_cma(C) snd_soc_core snd_compress snd_pcm_dmaengine rpivid_mem snd_pcm snd_timer snd syscopyarea sysfillrect sysimgblt fb_sys_fops nvmem_rmem uio_pdrv_genirq uio i2c_dev drm drm_panel_orientation_quirks backlight fuse ip_tables x_tables ipv6
| CPU: 2 PID: 22 Comm: ksoftirqd/2 Tainted: G WC 5.13.0-rc1-v7l+ #1
| Hardware name: BCM2711
| Backtrace:
| [<c0bdc4bc>] (dump_backtrace) from [<c0bdc830>] (show_stack+0x20/0x24)
| r7:ffffffff r6:00000000 r5:60000013 r4:c12e85a4
| [<c0bdc810>] (show_stack) from [<c0be0eec>] (dump_stack+0xc4/0xf0)
| [<c0be0e28>] (dump_stack) from [<c0221194>] (__warn+0xfc/0x158)
| r9:ef41b540 r8:00000009 r7:0000001c r6:00000009 r5:c075c064 r4:c0e6bfc8
| [<c0221098>] (__warn) from [<c0bdd004>] (warn_slowpath_fmt+0xa4/0xe4)
| r7:c075c064 r6:0000001c r5:c0e6bfc8 r4:c0e6c004
| [<c0bdcf64>] (warn_slowpath_fmt) from [<c075c064>] (refcount_warn_saturate+0x13c/0x174)
| r8:00000001 r7:c1323d40 r6:c3f90000 r5:c3eb4e40 r4:c37de240
| [<c075bf28>] (refcount_warn_saturate) from [<c0a3ea80>] (sock_efree+0x50/0x90)
| [<c0a3ea30>] (sock_efree) from [<c0a470a8>] (skb_release_head_state+0x50/0xe4)
| [<c0a47058>] (skb_release_head_state) from [<c0a48fe4>] (consume_skb+0x38/0xe0)
| r5:c3eb4e40 r4:c37de240
| [<c0a48fac>] (consume_skb) from [<bf32a920>] (can_receive+0xc8/0xf4 [can])
| r5:c3eb4e40 r4:c37de240
| [<bf32a858>] (can_receive [can]) from [<bf32aa50>] (can_rcv+0x44/0xc0 [can])
| r9:ef41b540 r8:c3f906a0 r7:c3f90680 r6:00000040 r5:bf32aa0c r4:c37de240
| [<bf32aa0c>] (can_rcv [can]) from [<c0a655ac>] (__netif_receive_skb_one_core+0x68/0x90)
| r5:bf32aa0c r4:c3f90000
| [<c0a65544>] (__netif_receive_skb_one_core) from [<c0a65620>] (__netif_receive_skb+0x20/0x70)
| r5:00000001 r4:c37de240
| [<c0a65600>] (__netif_receive_skb) from [<c0a656b0>] (netif_receive_skb+0x40/0x180)
| r5:00000001 r4:c37de240
| [<c0a65670>] (netif_receive_skb) from [<bf2ae9dc>] (can_rx_offload_napi_poll+0x58/0xb4 [can_dev])
| r4:c3f90000
| [<bf2ae984>] (can_rx_offload_napi_poll [can_dev]) from [<c0a66d74>] (__napi_poll+0x38/0x1dc)
--
Regards,
Torin Cooper-Bennun
Software Engineer | maxiluxsystems.com
