On 14.04.2021 19:35:21, Aswath Govindraju wrote: > From: Faiz Abbas <faiz_abbas@xxxxxx> > > Add support for implementing transceiver node as phy. The max_bitrate is > obtained by getting a phy attribute. > > Signed-off-by: Faiz Abbas <faiz_abbas@xxxxxx> > Signed-off-by: Aswath Govindraju <a-govindraju@xxxxxx> > --- > drivers/net/can/m_can/m_can.c | 18 ++++++++++++++++++ > drivers/net/can/m_can/m_can.h | 2 ++ > drivers/net/can/m_can/m_can_platform.c | 15 +++++++++++++++ > 3 files changed, 35 insertions(+) > > diff --git a/drivers/net/can/m_can/m_can.c b/drivers/net/can/m_can/m_can.c > index 34073cd077e4..4807a1f69cc7 100644 > --- a/drivers/net/can/m_can/m_can.c > +++ b/drivers/net/can/m_can/m_can.c > @@ -21,6 +21,7 @@ > #include <linux/iopoll.h> > #include <linux/can/dev.h> > #include <linux/pinctrl/consumer.h> > +#include <linux/phy/phy.h> > > #include "m_can.h" > > @@ -1514,6 +1515,7 @@ static void m_can_stop(struct net_device *dev) > static int m_can_close(struct net_device *dev) > { > struct m_can_classdev *cdev = netdev_priv(dev); > + int err; > > netif_stop_queue(dev); > > @@ -1536,6 +1538,14 @@ static int m_can_close(struct net_device *dev) > close_candev(dev); > can_led_event(dev, CAN_LED_EVENT_STOP); > > + if (cdev->transceiver) { > + err = phy_power_off(cdev->transceiver); phy_power_off() can handle NULL pointers > + if (err) { > + netdev_err(dev, "error powering off phy, err=%d\n", err); > + return err; As far as I can see it already print an error message in case of an error. > + } > + } > + > return 0; > } > > @@ -1720,6 +1730,14 @@ static int m_can_open(struct net_device *dev) > struct m_can_classdev *cdev = netdev_priv(dev); > int err; > > + if (cdev->transceiver) { > + err = phy_power_on(cdev->transceiver); > + if (err) { > + netdev_err(dev, "error powering on phy, err=%d\n", err); > + return err; > + } same here > + } > + > err = m_can_clk_start(cdev); > if (err) > return err; > diff --git a/drivers/net/can/m_can/m_can.h b/drivers/net/can/m_can/m_can.h > index ace071c3e58c..38cad068abad 100644 > --- a/drivers/net/can/m_can/m_can.h > +++ b/drivers/net/can/m_can/m_can.h > @@ -28,6 +28,7 @@ > #include <linux/iopoll.h> > #include <linux/can/dev.h> > #include <linux/pinctrl/consumer.h> > +#include <linux/phy/phy.h> > > /* m_can lec values */ > enum m_can_lec_type { > @@ -82,6 +83,7 @@ struct m_can_classdev { > struct workqueue_struct *tx_wq; > struct work_struct tx_work; > struct sk_buff *tx_skb; > + struct phy *transceiver; > > struct can_bittiming_const *bit_timing; > struct can_bittiming_const *data_timing; > diff --git a/drivers/net/can/m_can/m_can_platform.c b/drivers/net/can/m_can/m_can_platform.c > index 599de0e08cd7..566ba25fb186 100644 > --- a/drivers/net/can/m_can/m_can_platform.c > +++ b/drivers/net/can/m_can/m_can_platform.c > @@ -6,6 +6,7 @@ > // Copyright (C) 2018-19 Texas Instruments Incorporated - http://www.ti.com/ > > #include <linux/platform_device.h> > +#include <linux/phy/phy.h> > > #include "m_can.h" > > @@ -67,6 +68,7 @@ static int m_can_plat_probe(struct platform_device *pdev) > struct resource *res; > void __iomem *addr; > void __iomem *mram_addr; > + struct phy *transceiver; > int irq, ret = 0; > > mcan_class = m_can_class_allocate_dev(&pdev->dev, > @@ -101,6 +103,18 @@ static int m_can_plat_probe(struct platform_device *pdev) > goto probe_fail; > } > > + transceiver = devm_of_phy_optional_get_by_index(&pdev->dev, pdev->dev.of_node, 0); > + if (IS_ERR(transceiver)) { > + ret = PTR_ERR(transceiver); > + dev_err(&pdev->dev, "error while getting phy, err=%d\n", ret); > + return ret; > + } > + > + if (!transceiver) > + dev_info(&pdev->dev, "No transceiver phy found\n"); I don't think you should print anything here... If the driver was working before w/o a phy it will still work without one. > + else > + priv->cdev.can.bitrate_max = transceiver->attrs.max_link_rate; > + > priv->base = addr; > priv->mram_base = mram_addr; > > @@ -108,6 +122,7 @@ static int m_can_plat_probe(struct platform_device *pdev) > mcan_class->pm_clock_support = 1; > mcan_class->can.clock.freq = clk_get_rate(mcan_class->cclk); > mcan_class->dev = &pdev->dev; > + mcan_class->transceiver = transceiver; > > mcan_class->ops = &m_can_plat_ops; Marc -- Pengutronix e.K. | Marc Kleine-Budde | Embedded Linux | https://www.pengutronix.de | Vertretung West/Dortmund | Phone: +49-231-2826-924 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
Attachment:
signature.asc
Description: PGP signature