Hi All, I just updated kernel 4.14 within OpenWRT from 4.14.224 to 4.14.229 Booting it shows the splat below on each run. [1]It seems there are 2 patches regarding flexcan which were introduced in 4.14.226
--> ce59ffca5c49 ("can: flexcan: enable RX FIFO after FRZ/HALT valid")
--> bb7c9039a396 ("can: flexcan: assert FRZ bit in flexcan_chip_freeze()")
Reverting these fixes the splat.
Hope this helps,
Koen
[1]
[ 10.062140] flexcan 2090000.flexcan: 2090000.flexcan supply xceiver
not found, using dummy regulator
[ 10.071631] Division by zero in kernel. [ 10.075511] CPU: 0 PID: 1061 Comm: kmodloader Not tainted 4.14.229 #0 [ 10.081981] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) [ 10.088529] Backtrace:[ 10.091040] [<8010ba30>] (dump_backtrace) from [<8010bdd4>] (show_stack+0x18/0x1c)
[ 10.098631] r7:9f5edc10 r6:60000013 r5:00000000 r4:80932c88[ 10.104336] [<8010bdbc>] (show_stack) from [<8063f8e0>] (dump_stack+0x9c/0xb0) [ 10.111591] [<8063f844>] (dump_stack) from [<8010bb90>] (__div0+0x1c/0x20)
[ 10.118491] r7:9f5edc10 r6:a0f0c000 r5:9ea3fd40 r4:9ea3f800 [ 10.124199] [<8010bb74>] (__div0) from [<8063de94>] (Ldiv0+0x8/0x10)[ 10.130611] [<7f32b334>] (flexcan_mailbox_read [flexcan]) from [<7f32c480>] (flexcan_probe+0x360/0x468 [flexcan])
[ 10.140902] r7:9f5edc10 r6:a0f0c000 r5:9ea3fd40 r4:9ea3f800[ 10.146608] [<7f32c120>] (flexcan_probe [flexcan]) from [<8040f384>] (platform_drv_probe+0x60/0xb4) [ 10.155698] r10:80903c08 r9:00000000 r8:0000000d r7:fffffdfb r6:7f32e014 r5:fffffffe
[ 10.163562] r4:9f5edc10[ 10.166117] [<8040f324>] (platform_drv_probe) from [<8040db78>] (driver_probe_device+0x154/0x2ec)
[ 10.175012] r7:7f32e014 r6:00000000 r5:9f5edc10 r4:80964928[ 10.180720] [<8040da24>] (driver_probe_device) from [<8040dd98>] (__driver_attach+0x88/0xac) [ 10.189195] r9:7f32e080 r8:014000c0 r7:00000000 r6:9f5edc44 r5:7f32e014 r4:9f5edc10 [ 10.196985] [<8040dd10>] (__driver_attach) from [<8040bfc0>] (bus_for_each_dev+0x54/0xa8)
[ 10.205199] r7:00000000 r6:8040dd10 r5:7f32e014 r4:00000000[ 10.210891] [<8040bf6c>] (bus_for_each_dev) from [<8040d4ac>] (driver_attach+0x24/0x28)
[ 10.218912] r6:9e41e880 r5:8091b340 r4:7f32e014[ 10.223559] [<8040d488>] (driver_attach) from [<8040d0a0>] (bus_add_driver+0xf4/0x204) [ 10.231529] [<8040cfac>] (bus_add_driver) from [<8040e4e8>] (driver_register+0xb0/0xec)
[ 10.239574] r7:7f331000 r6:00000000 r5:ffffe000 r4:7f32e014[ 10.245266] [<8040e438>] (driver_register) from [<8040f2d4>] (__platform_driver_register+0x48/0x50)
[ 10.254332] r5:ffffe000 r4:80903c08[ 10.257953] [<8040f28c>] (__platform_driver_register) from [<7f331020>] (init_module+0x20/0x1000 [flexcan]) [ 10.267729] [<7f331000>] (init_module [flexcan]) from [<80101a1c>] (do_one_initcall+0xc4/0x188) [ 10.276490] [<80101958>] (do_one_initcall) from [<80192458>] (do_init_module+0x68/0x204) [ 10.284615] r9:7f32e080 r8:014000c0 r7:00000000 r6:9e48b640 r5:9e4af000 r4:7f32e080 [ 10.292389] [<801923f0>] (do_init_module) from [<801944b4>] (load_module+0x1e1c/0x220c)
[ 10.300441] r7:00000000 r6:9e4af1a8 r5:9e4af000 r4:9e8f3f30[ 10.306158] [<80192698>] (load_module) from [<80194a00>] (SyS_init_module+0x15c/0x17c) [ 10.314110] r10:00000051 r9:000128ce r8:ffffe000 r7:001e545c r6:00000000 r5:a0f0945c
[ 10.321957] r4:0000345c[ 10.324541] [<801948a4>] (SyS_init_module) from [<801079e0>] (ret_fast_syscall+0x0/0x54) [ 10.332663] r10:00000080 r9:9e8f2000 r8:80107be4 r7:00000080 r6:00000003 r5:00000000
[ 10.340511] r4:00000000[ 10.344089] flexcan 2090000.flexcan: device registered (reg_base=a0f0c000, irq=33)
