On 11/2/20 3:20 PM, Drew Fustini wrote:
> I am able to have can0 (spi0.0) and can1 (spi1.0) initialize ok on the
> waveshare canfd hat (solder jumper mode A) with the mcp251xfd driver
> from Marc's rpi 5.4 branch. However, I am not able to do a loopback
> test successfully.
>
> No errors from setup:
> sudo ip link set can0 type can bitrate 250000 listen-only on
> sudo ip link set can1 type can bitrate 250000 listen-only on
^^^^^^^^^^^^^^
It really does listen-only on the bus, i.e. not send anything :)
Marc
--
Pengutronix e.K. | Marc Kleine-Budde |
Embedded Linux | https://www.pengutronix.de |
Vertretung West/Dortmund | Phone: +49-231-2826-924 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
Attachment:
signature.asc
Description: OpenPGP digital signature
