Add the TCAN4x5x SPI CAN driver. This device uses the
Bosch MCAN IP core along with a SPI interface map.
Register to the MCAN common core code to manage the MCAN IP.
This device has a special method to indicate a write/read
operation on the data payload.
Acked-by: Wolfgang Grandegger <wg@xxxxxxxxxxxxxx>
Signed-off-by: Dan Murphy <dmurphy@xxxxxx>
---
v12 - No changes - https://lore.kernel.org/patchwork/patch/1052301/
v11 - No changes - https://lore.kernel.org/patchwork/patch/1051180/
v10 - No changes - https://lore.kernel.org/patchwork/patch/1050490/
v9 - No changes - https://lore.kernel.org/patchwork/patch/1050119/
v8 - No changes - https://lore.kernel.org/patchwork/patch/1047978/
v7 - Fixed remaining checkpatch issues and renamed callbacks for m_can change -
https://lore.kernel.org/patchwork/patch/1047221/
v6 - Updated Kconfig help and added REGMAP_SPI dependency, fixed coding style issues,
removed setting GPIO high in wake routine, change -EIO to return ret in init and
setup functions - https://lore.kernel.org/patchwork/patch/1042443/
drivers/net/can/m_can/Kconfig | 9 +
drivers/net/can/m_can/Makefile | 1 +
drivers/net/can/m_can/tcan4x5x.c | 533 +++++++++++++++++++++++++++++++
3 files changed, 543 insertions(+)
create mode 100644 drivers/net/can/m_can/tcan4x5x.c
diff --git a/drivers/net/can/m_can/Kconfig b/drivers/net/can/m_can/Kconfig
index f7119fd72df4..cf4f32765efa 100644
--- a/drivers/net/can/m_can/Kconfig
+++ b/drivers/net/can/m_can/Kconfig
@@ -12,3 +12,12 @@ config CAN_M_CAN_PLATFORM
Say Y here if you want support for IO Mapped Bosch M_CAN controller.
This support is for devices that have the Bosch M_CAN controller
IP embedded into the device and the IP is IO Mapped to the processor.
+
+config CAN_M_CAN_TCAN4X5X
+ depends on CAN_M_CAN
+ depends on REGMAP_SPI
+ tristate "TCAN4X5X M_CAN device"
+ ---help---
+ Say Y here if you want support for Texas Instruments TCAN4x5x
+ M_CAN controller. This device is a peripherial device that uses the
+ SPI bus for communication.
diff --git a/drivers/net/can/m_can/Makefile b/drivers/net/can/m_can/Makefile
index 057bbcdb3c74..e77f0eccff97 100644
--- a/drivers/net/can/m_can/Makefile
+++ b/drivers/net/can/m_can/Makefile
@@ -4,3 +4,4 @@
obj-$(CONFIG_CAN_M_CAN) += m_can.o
obj-$(CONFIG_CAN_M_CAN_PLATFORM) += m_can_platform.o
+obj-$(CONFIG_CAN_M_CAN_TCAN4X5X) += tcan4x5x.o
diff --git a/drivers/net/can/m_can/tcan4x5x.c b/drivers/net/can/m_can/tcan4x5x.c
new file mode 100644
index 000000000000..411502c3c98e
--- /dev/null
+++ b/drivers/net/can/m_can/tcan4x5x.c
@@ -0,0 +1,533 @@
+// SPDX-License-Identifier: GPL-2.0
+// SPI to CAN driver for the Texas Instruments TCAN4x5x
+// Copyright (C) 2018-19 Texas Instruments Incorporated - http://www.ti.com/
+
+#include <linux/regmap.h>
+#include <linux/spi/spi.h>
+
+#include <linux/regulator/consumer.h>
+#include <linux/gpio/consumer.h>
+
+#include "m_can.h"
+
+#define DEVICE_NAME "tcan4x5x"
+#define TCAN4X5X_EXT_CLK_DEF 40000000
+
+#define TCAN4X5X_DEV_ID0 0x00
+#define TCAN4X5X_DEV_ID1 0x04
+#define TCAN4X5X_REV 0x08
+#define TCAN4X5X_STATUS 0x0C
+#define TCAN4X5X_ERROR_STATUS 0x10
+#define TCAN4X5X_CONTROL 0x14
+
+#define TCAN4X5X_CONFIG 0x800
+#define TCAN4X5X_TS_PRESCALE 0x804
+#define TCAN4X5X_TEST_REG 0x808
+#define TCAN4X5X_INT_FLAGS 0x820
+#define TCAN4X5X_MCAN_INT_REG 0x824
+#define TCAN4X5X_INT_EN 0x830
+
+/* Interrupt bits */
+#define TCAN4X5X_CANBUSTERMOPEN_INT_EN BIT(30)
+#define TCAN4X5X_CANHCANL_INT_EN BIT(29)
+#define TCAN4X5X_CANHBAT_INT_EN BIT(28)
+#define TCAN4X5X_CANLGND_INT_EN BIT(27)
+#define TCAN4X5X_CANBUSOPEN_INT_EN BIT(26)
+#define TCAN4X5X_CANBUSGND_INT_EN BIT(25)
+#define TCAN4X5X_CANBUSBAT_INT_EN BIT(24)
+#define TCAN4X5X_UVSUP_INT_EN BIT(22)
+#define TCAN4X5X_UVIO_INT_EN BIT(21)
+#define TCAN4X5X_TSD_INT_EN BIT(19)
+#define TCAN4X5X_ECCERR_INT_EN BIT(16)
+#define TCAN4X5X_CANINT_INT_EN BIT(15)
+#define TCAN4X5X_LWU_INT_EN BIT(14)
+#define TCAN4X5X_CANSLNT_INT_EN BIT(10)
+#define TCAN4X5X_CANDOM_INT_EN BIT(8)
+#define TCAN4X5X_CANBUS_ERR_INT_EN BIT(5)
+#define TCAN4X5X_BUS_FAULT BIT(4)
+#define TCAN4X5X_MCAN_INT BIT(1)
+#define TCAN4X5X_ENABLE_TCAN_INT (TCAN4X5X_MCAN_INT | \
+ TCAN4X5X_BUS_FAULT | \
+ TCAN4X5X_CANBUS_ERR_INT_EN | \
+ TCAN4X5X_CANINT_INT_EN)
+
+/* MCAN Interrupt bits */
+#define TCAN4X5X_MCAN_IR_ARA BIT(29)
+#define TCAN4X5X_MCAN_IR_PED BIT(28)
+#define TCAN4X5X_MCAN_IR_PEA BIT(27)
+#define TCAN4X5X_MCAN_IR_WD BIT(26)
+#define TCAN4X5X_MCAN_IR_BO BIT(25)
+#define TCAN4X5X_MCAN_IR_EW BIT(24)
+#define TCAN4X5X_MCAN_IR_EP BIT(23)
+#define TCAN4X5X_MCAN_IR_ELO BIT(22)
+#define TCAN4X5X_MCAN_IR_BEU BIT(21)
+#define TCAN4X5X_MCAN_IR_BEC BIT(20)
+#define TCAN4X5X_MCAN_IR_DRX BIT(19)
+#define TCAN4X5X_MCAN_IR_TOO BIT(18)
+#define TCAN4X5X_MCAN_IR_MRAF BIT(17)
+#define TCAN4X5X_MCAN_IR_TSW BIT(16)
+#define TCAN4X5X_MCAN_IR_TEFL BIT(15)
+#define TCAN4X5X_MCAN_IR_TEFF BIT(14)
+#define TCAN4X5X_MCAN_IR_TEFW BIT(13)
+#define TCAN4X5X_MCAN_IR_TEFN BIT(12)
+#define TCAN4X5X_MCAN_IR_TFE BIT(11)
+#define TCAN4X5X_MCAN_IR_TCF BIT(10)
+#define TCAN4X5X_MCAN_IR_TC BIT(9)
+#define TCAN4X5X_MCAN_IR_HPM BIT(8)
+#define TCAN4X5X_MCAN_IR_RF1L BIT(7)
+#define TCAN4X5X_MCAN_IR_RF1F BIT(6)
+#define TCAN4X5X_MCAN_IR_RF1W BIT(5)
+#define TCAN4X5X_MCAN_IR_RF1N BIT(4)
+#define TCAN4X5X_MCAN_IR_RF0L BIT(3)
+#define TCAN4X5X_MCAN_IR_RF0F BIT(2)
+#define TCAN4X5X_MCAN_IR_RF0W BIT(1)
+#define TCAN4X5X_MCAN_IR_RF0N BIT(0)
+#define TCAN4X5X_ENABLE_MCAN_INT (TCAN4X5X_MCAN_IR_TC | \
+ TCAN4X5X_MCAN_IR_RF0N | \
+ TCAN4X5X_MCAN_IR_RF1N | \
+ TCAN4X5X_MCAN_IR_RF0F | \
+ TCAN4X5X_MCAN_IR_RF1F)
+#define TCAN4X5X_MRAM_START 0x8000
+#define TCAN4X5X_MCAN_OFFSET 0x1000
+#define TCAN4X5X_MAX_REGISTER 0x8fff
+
+#define TCAN4X5X_CLEAR_ALL_INT 0xffffffff
+#define TCAN4X5X_SET_ALL_INT 0xffffffff
+
+#define TCAN4X5X_WRITE_CMD (0x61 << 24)
+#define TCAN4X5X_READ_CMD (0x41 << 24)
+
+#define TCAN4X5X_MODE_SEL_MASK (BIT(7) | BIT(6))
+#define TCAN4X5X_MODE_SLEEP 0x00
+#define TCAN4X5X_MODE_STANDBY BIT(6)
+#define TCAN4X5X_MODE_NORMAL BIT(7)
+
+#define TCAN4X5X_SW_RESET BIT(2)
+
+#define TCAN4X5X_MCAN_CONFIGURED BIT(5)
+#define TCAN4X5X_WATCHDOG_EN BIT(3)
+#define TCAN4X5X_WD_60_MS_TIMER 0
+#define TCAN4X5X_WD_600_MS_TIMER BIT(28)
+#define TCAN4X5X_WD_3_S_TIMER BIT(29)
+#define TCAN4X5X_WD_6_S_TIMER (BIT(28) | BIT(29))
+
+struct tcan4x5x_priv {
+ struct regmap *regmap;
+ struct spi_device *spi;
+ struct mutex tcan4x5x_lock; /* SPI device lock */
+
+ struct m_can_classdev *mcan_dev;
+
+ struct gpio_desc *reset_gpio;
+ struct gpio_desc *interrupt_gpio;
+ struct gpio_desc *device_wake_gpio;
+ struct gpio_desc *device_state_gpio;
+ struct regulator *power;
+
+ /* Register based ip */
+ int mram_start;
+ int reg_offset;
+};
+
+static struct can_bittiming_const tcan4x5x_bittiming_const = {
+ .name = DEVICE_NAME,
+ .tseg1_min = 2,
+ .tseg1_max = 31,
+ .tseg2_min = 2,
+ .tseg2_max = 16,
+ .sjw_max = 16,
+ .brp_min = 1,
+ .brp_max = 32,
+ .brp_inc = 1,
+};
+
+static struct can_bittiming_const tcan4x5x_data_bittiming_const = {
+ .name = DEVICE_NAME,
+ .tseg1_min = 1,
+ .tseg1_max = 32,
+ .tseg2_min = 1,
+ .tseg2_max = 16,
+ .sjw_max = 16,
+ .brp_min = 1,
+ .brp_max = 32,
+ .brp_inc = 1,
+};
+
+static void tcan4x5x_check_wake(struct tcan4x5x_priv *priv)
+{
+ int wake_state = 0;
+
+ if (priv->device_state_gpio)
+ wake_state = gpiod_get_value(priv->device_state_gpio);
+
+ if (priv->device_wake_gpio && wake_state) {
+ gpiod_set_value(priv->device_wake_gpio, 0);
+ usleep_range(5, 50);
+ gpiod_set_value(priv->device_wake_gpio, 1);
+ }
+}
+
+static int regmap_spi_gather_write(void *context, const void *reg,
+ size_t reg_len, const void *val,
+ size_t val_len)
+{
+ struct device *dev = context;
+ struct spi_device *spi = to_spi_device(dev);
+ struct spi_message m;
+ u32 addr;
+ struct spi_transfer t[2] = {
+ { .tx_buf = &addr, .len = reg_len, .cs_change = 0,},
+ { .tx_buf = val, .len = val_len, },
+ };
+
+ addr = TCAN4X5X_WRITE_CMD | (*((u16 *)reg) << 8) | val_len >> 3;
+
+ spi_message_init(&m);
+ spi_message_add_tail(&t[0], &m);
+ spi_message_add_tail(&t[1], &m);
+
+ return spi_sync(spi, &m);
+}
+
+static int tcan4x5x_regmap_write(void *context, const void *data, size_t count)
+{
+ u16 *reg = (u16 *)(data);
+ const u32 *val = data + 4;
+
+ return regmap_spi_gather_write(context, reg, 4, val, count);
+}
+
+static int regmap_spi_async_write(void *context,
+ const void *reg, size_t reg_len,
+ const void *val, size_t val_len,
+ struct regmap_async *a)
+{
+ return -ENOTSUPP;
+}
+
+static struct regmap_async *regmap_spi_async_alloc(void)
+{
+ return NULL;
+}
+
+static int tcan4x5x_regmap_read(void *context,
+ const void *reg, size_t reg_size,
+ void *val, size_t val_size)
+{
+ struct device *dev = context;
+ struct spi_device *spi = to_spi_device(dev);
+
+ u32 addr = TCAN4X5X_READ_CMD | (*((u16 *)reg) << 8) | val_size >> 2;
+
+ return spi_write_then_read(spi, &addr, reg_size, (u32 *)val, val_size);
+}
+
+static struct regmap_bus tcan4x5x_bus = {
+ .write = tcan4x5x_regmap_write,
+ .gather_write = regmap_spi_gather_write,
+ .async_write = regmap_spi_async_write,
+ .async_alloc = regmap_spi_async_alloc,
+ .read = tcan4x5x_regmap_read,
+ .read_flag_mask = 0x00,
+ .reg_format_endian_default = REGMAP_ENDIAN_NATIVE,
+ .val_format_endian_default = REGMAP_ENDIAN_NATIVE,
+};
+
+static u32 tcan4x5x_read_reg(struct m_can_classdev *cdev, int reg)
+{
+ struct tcan4x5x_priv *priv = (struct tcan4x5x_priv *)cdev->device_data;
+ u32 val;
+
+ tcan4x5x_check_wake(priv);
