On 5/9/19 6:11 PM, Dan Murphy wrote: > Add the TCAN4x5x SPI CAN driver. This device uses the > Bosch MCAN IP core along with a SPI interface map. > Register to the MCAN common core code to manage the MCAN IP. > > This device has a special method to indicate a write/read > operation on the data payload. > > Acked-by: Wolfgang Grandegger <wg@xxxxxxxxxxxxxx> > Signed-off-by: Dan Murphy <dmurphy@xxxxxx> > --- > > v12 - No changes - https://lore.kernel.org/patchwork/patch/1052301/ > > v11 - No changes - https://lore.kernel.org/patchwork/patch/1051180/ > v10 - No changes - https://lore.kernel.org/patchwork/patch/1050490/ > v9 - No changes - https://lore.kernel.org/patchwork/patch/1050119/ > v8 - No changes - https://lore.kernel.org/patchwork/patch/1047978/ > v7 - Fixed remaining checkpatch issues and renamed callbacks for m_can change - > https://lore.kernel.org/patchwork/patch/1047221/ > v6 - Updated Kconfig help and added REGMAP_SPI dependency, fixed coding style issues, > removed setting GPIO high in wake routine, change -EIO to return ret in init and > setup functions - https://lore.kernel.org/patchwork/patch/1042443/ > > drivers/net/can/m_can/Kconfig | 9 + > drivers/net/can/m_can/Makefile | 1 + > drivers/net/can/m_can/tcan4x5x.c | 533 +++++++++++++++++++++++++++++++ > 3 files changed, 543 insertions(+) > create mode 100644 drivers/net/can/m_can/tcan4x5x.c > > diff --git a/drivers/net/can/m_can/Kconfig b/drivers/net/can/m_can/Kconfig > index f7119fd72df4..cf4f32765efa 100644 > --- a/drivers/net/can/m_can/Kconfig > +++ b/drivers/net/can/m_can/Kconfig > @@ -12,3 +12,12 @@ config CAN_M_CAN_PLATFORM > Say Y here if you want support for IO Mapped Bosch M_CAN controller. > This support is for devices that have the Bosch M_CAN controller > IP embedded into the device and the IP is IO Mapped to the processor. > + > +config CAN_M_CAN_TCAN4X5X > + depends on CAN_M_CAN > + depends on REGMAP_SPI > + tristate "TCAN4X5X M_CAN device" > + ---help--- > + Say Y here if you want support for Texas Instruments TCAN4x5x > + M_CAN controller. This device is a peripherial device that uses the > + SPI bus for communication. > diff --git a/drivers/net/can/m_can/Makefile b/drivers/net/can/m_can/Makefile > index 057bbcdb3c74..e77f0eccff97 100644 > --- a/drivers/net/can/m_can/Makefile > +++ b/drivers/net/can/m_can/Makefile > @@ -4,3 +4,4 @@ > > obj-$(CONFIG_CAN_M_CAN) += m_can.o > obj-$(CONFIG_CAN_M_CAN_PLATFORM) += m_can_platform.o > +obj-$(CONFIG_CAN_M_CAN_TCAN4X5X) += tcan4x5x.o > diff --git a/drivers/net/can/m_can/tcan4x5x.c b/drivers/net/can/m_can/tcan4x5x.c > new file mode 100644 > index 000000000000..411502c3c98e > --- /dev/null > +++ b/drivers/net/can/m_can/tcan4x5x.c > @@ -0,0 +1,533 @@ > +// SPDX-License-Identifier: GPL-2.0 > +// SPI to CAN driver for the Texas Instruments TCAN4x5x > +// Copyright (C) 2018-19 Texas Instruments Incorporated - http://www.ti.com/ > + > +#include <linux/regmap.h> > +#include <linux/spi/spi.h> > + > +#include <linux/regulator/consumer.h> > +#include <linux/gpio/consumer.h> > + > +#include "m_can.h" > + > +#define DEVICE_NAME "tcan4x5x" > +#define TCAN4X5X_EXT_CLK_DEF 40000000 > + > +#define TCAN4X5X_DEV_ID0 0x00 > +#define TCAN4X5X_DEV_ID1 0x04 > +#define TCAN4X5X_REV 0x08 > +#define TCAN4X5X_STATUS 0x0C > +#define TCAN4X5X_ERROR_STATUS 0x10 > +#define TCAN4X5X_CONTROL 0x14 > + > +#define TCAN4X5X_CONFIG 0x800 > +#define TCAN4X5X_TS_PRESCALE 0x804 > +#define TCAN4X5X_TEST_REG 0x808 > +#define TCAN4X5X_INT_FLAGS 0x820 > +#define TCAN4X5X_MCAN_INT_REG 0x824 > +#define TCAN4X5X_INT_EN 0x830 > + > +/* Interrupt bits */ > +#define TCAN4X5X_CANBUSTERMOPEN_INT_EN BIT(30) > +#define TCAN4X5X_CANHCANL_INT_EN BIT(29) > +#define TCAN4X5X_CANHBAT_INT_EN BIT(28) > +#define TCAN4X5X_CANLGND_INT_EN BIT(27) > +#define TCAN4X5X_CANBUSOPEN_INT_EN BIT(26) > +#define TCAN4X5X_CANBUSGND_INT_EN BIT(25) > +#define TCAN4X5X_CANBUSBAT_INT_EN BIT(24) > +#define TCAN4X5X_UVSUP_INT_EN BIT(22) > +#define TCAN4X5X_UVIO_INT_EN BIT(21) > +#define TCAN4X5X_TSD_INT_EN BIT(19) > +#define TCAN4X5X_ECCERR_INT_EN BIT(16) > +#define TCAN4X5X_CANINT_INT_EN BIT(15) > +#define TCAN4X5X_LWU_INT_EN BIT(14) > +#define TCAN4X5X_CANSLNT_INT_EN BIT(10) > +#define TCAN4X5X_CANDOM_INT_EN BIT(8) > +#define TCAN4X5X_CANBUS_ERR_INT_EN BIT(5) > +#define TCAN4X5X_BUS_FAULT BIT(4) > +#define TCAN4X5X_MCAN_INT BIT(1) > +#define TCAN4X5X_ENABLE_TCAN_INT (TCAN4X5X_MCAN_INT | \ > + TCAN4X5X_BUS_FAULT | \ > + TCAN4X5X_CANBUS_ERR_INT_EN | \ > + TCAN4X5X_CANINT_INT_EN) > + > +/* MCAN Interrupt bits */ > +#define TCAN4X5X_MCAN_IR_ARA BIT(29) > +#define TCAN4X5X_MCAN_IR_PED BIT(28) > +#define TCAN4X5X_MCAN_IR_PEA BIT(27) > +#define TCAN4X5X_MCAN_IR_WD BIT(26) > +#define TCAN4X5X_MCAN_IR_BO BIT(25) > +#define TCAN4X5X_MCAN_IR_EW BIT(24) > +#define TCAN4X5X_MCAN_IR_EP BIT(23) > +#define TCAN4X5X_MCAN_IR_ELO BIT(22) > +#define TCAN4X5X_MCAN_IR_BEU BIT(21) > +#define TCAN4X5X_MCAN_IR_BEC BIT(20) > +#define TCAN4X5X_MCAN_IR_DRX BIT(19) > +#define TCAN4X5X_MCAN_IR_TOO BIT(18) > +#define TCAN4X5X_MCAN_IR_MRAF BIT(17) > +#define TCAN4X5X_MCAN_IR_TSW BIT(16) > +#define TCAN4X5X_MCAN_IR_TEFL BIT(15) > +#define TCAN4X5X_MCAN_IR_TEFF BIT(14) > +#define TCAN4X5X_MCAN_IR_TEFW BIT(13) > +#define TCAN4X5X_MCAN_IR_TEFN BIT(12) > +#define TCAN4X5X_MCAN_IR_TFE BIT(11) > +#define TCAN4X5X_MCAN_IR_TCF BIT(10) > +#define TCAN4X5X_MCAN_IR_TC BIT(9) > +#define TCAN4X5X_MCAN_IR_HPM BIT(8) > +#define TCAN4X5X_MCAN_IR_RF1L BIT(7) > +#define TCAN4X5X_MCAN_IR_RF1F BIT(6) > +#define TCAN4X5X_MCAN_IR_RF1W BIT(5) > +#define TCAN4X5X_MCAN_IR_RF1N BIT(4) > +#define TCAN4X5X_MCAN_IR_RF0L BIT(3) > +#define TCAN4X5X_MCAN_IR_RF0F BIT(2) > +#define TCAN4X5X_MCAN_IR_RF0W BIT(1) > +#define TCAN4X5X_MCAN_IR_RF0N BIT(0) > +#define TCAN4X5X_ENABLE_MCAN_INT (TCAN4X5X_MCAN_IR_TC | \ > + TCAN4X5X_MCAN_IR_RF0N | \ > + TCAN4X5X_MCAN_IR_RF1N | \ > + TCAN4X5X_MCAN_IR_RF0F | \ > + TCAN4X5X_MCAN_IR_RF1F) > +#define TCAN4X5X_MRAM_START 0x8000 > +#define TCAN4X5X_MCAN_OFFSET 0x1000 > +#define TCAN4X5X_MAX_REGISTER 0x8fff > + > +#define TCAN4X5X_CLEAR_ALL_INT 0xffffffff > +#define TCAN4X5X_SET_ALL_INT 0xffffffff > + > +#define TCAN4X5X_WRITE_CMD (0x61 << 24) > +#define TCAN4X5X_READ_CMD (0x41 << 24) > + > +#define TCAN4X5X_MODE_SEL_MASK (BIT(7) | BIT(6)) > +#define TCAN4X5X_MODE_SLEEP 0x00 > +#define TCAN4X5X_MODE_STANDBY BIT(6) > +#define TCAN4X5X_MODE_NORMAL BIT(7) > + > +#define TCAN4X5X_SW_RESET BIT(2) > + > +#define TCAN4X5X_MCAN_CONFIGURED BIT(5) > +#define TCAN4X5X_WATCHDOG_EN BIT(3) > +#define TCAN4X5X_WD_60_MS_TIMER 0 > +#define TCAN4X5X_WD_600_MS_TIMER BIT(28) > +#define TCAN4X5X_WD_3_S_TIMER BIT(29) > +#define TCAN4X5X_WD_6_S_TIMER (BIT(28) | BIT(29)) > + > +struct tcan4x5x_priv { > + struct regmap *regmap; > + struct spi_device *spi; > + struct mutex tcan4x5x_lock; /* SPI device lock */ > + > + struct m_can_classdev *mcan_dev; > + > + struct gpio_desc *reset_gpio; > + struct gpio_desc *interrupt_gpio; > + struct gpio_desc *device_wake_gpio; > + struct gpio_desc *device_state_gpio; > + struct regulator *power; > + > + /* Register based ip */ > + int mram_start; > + int reg_offset; > +}; > + > +static struct can_bittiming_const tcan4x5x_bittiming_const = { > + .name = DEVICE_NAME, > + .tseg1_min = 2, > + .tseg1_max = 31, > + .tseg2_min = 2, > + .tseg2_max = 16, > + .sjw_max = 16, > + .brp_min = 1, > + .brp_max = 32, > + .brp_inc = 1, > +}; > + > +static struct can_bittiming_const tcan4x5x_data_bittiming_const = { > + .name = DEVICE_NAME, > + .tseg1_min = 1, > + .tseg1_max = 32, > + .tseg2_min = 1, > + .tseg2_max = 16, > + .sjw_max = 16, > + .brp_min = 1, > + .brp_max = 32, > + .brp_inc = 1, > +}; > + > +static void tcan4x5x_check_wake(struct tcan4x5x_priv *priv) > +{ > + int wake_state = 0; > + > + if (priv->device_state_gpio) > + wake_state = gpiod_get_value(priv->device_state_gpio); > + > + if (priv->device_wake_gpio && wake_state) { > + gpiod_set_value(priv->device_wake_gpio, 0); > + usleep_range(5, 50); > + gpiod_set_value(priv->device_wake_gpio, 1); > + } > +} > + > +static int regmap_spi_gather_write(void *context, const void *reg, > + size_t reg_len, const void *val, > + size_t val_len) > +{ > + struct device *dev = context; > + struct spi_device *spi = to_spi_device(dev); > + struct spi_message m; > + u32 addr; > + struct spi_transfer t[2] = { > + { .tx_buf = &addr, .len = reg_len, .cs_change = 0,}, > + { .tx_buf = val, .len = val_len, }, > + }; > + > + addr = TCAN4X5X_WRITE_CMD | (*((u16 *)reg) << 8) | val_len >> 3; > + > + spi_message_init(&m); > + spi_message_add_tail(&t[0], &m); > + spi_message_add_tail(&t[1], &m); > + > + return spi_sync(spi, &m); > +} > + > +static int tcan4x5x_regmap_write(void *context, const void *data, size_t count) > +{ > + u16 *reg = (u16 *)(data); > + const u32 *val = data + 4; > + > + return regmap_spi_gather_write(context, reg, 4, val, count); > +} > + > +static int regmap_spi_async_write(void *context, > + const void *reg, size_t reg_len, > + const void *val, size_t val_len, > + struct regmap_async *a) > +{ > + return -ENOTSUPP; > +} > + > +static struct regmap_async *regmap_spi_async_alloc(void) > +{ > + return NULL; > +} > + > +static int tcan4x5x_regmap_read(void *context, > + const void *reg, size_t reg_size, > + void *val, size_t val_size) > +{ > + struct device *dev = context; > + struct spi_device *spi = to_spi_device(dev); > + > + u32 addr = TCAN4X5X_READ_CMD | (*((u16 *)reg) << 8) | val_size >> 2; > + > + return spi_write_then_read(spi, &addr, reg_size, (u32 *)val, val_size); > +} > + > +static struct regmap_bus tcan4x5x_bus = { > + .write = tcan4x5x_regmap_write, > + .gather_write = regmap_spi_gather_write, > + .async_write = regmap_spi_async_write, > + .async_alloc = regmap_spi_async_alloc, > + .read = tcan4x5x_regmap_read, > + .read_flag_mask = 0x00, > + .reg_format_endian_default = REGMAP_ENDIAN_NATIVE, > + .val_format_endian_default = REGMAP_ENDIAN_NATIVE, > +}; > + > +static u32 tcan4x5x_read_reg(struct m_can_classdev *cdev, int reg) > +{ > + struct tcan4x5x_priv *priv = (struct tcan4x5x_priv *)cdev->device_data; > + u32 val; > + > + tcan4x5x_check_wake(priv); Do you have to call this every time you access the Chip? Can you move this into the open() function? Marc -- Pengutronix e.K. | Marc Kleine-Budde | Industrial Linux Solutions | Phone: +49-231-2826-924 | Vertretung West/Dortmund | Fax: +49-5121-206917-5555 | Amtsgericht Hildesheim, HRA 2686 | http://www.pengutronix.de |
Attachment:
signature.asc
Description: OpenPGP digital signature
