Re: BlueZ 5.43: HoG peripheral services re-discovered again and again on every reconnect

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Petri,

This is perhaps related to the question I asked yesterday.
Where can I find your 4 patches?

Best regards
José Bollo
José Bollo - Senior Software Engineer
www.iot.bzh



2016-12-08 22:52 GMT+01:00 Petri Gynther <pgynther@xxxxxxxxxx>:
> Hi Luiz,
>
> On Fri, Dec 2, 2016 at 3:56 AM, Luiz Augusto von Dentz
> <luiz.dentz@xxxxxxxxx> wrote:
>> Hi Petri,
>>
>> On Thu, Dec 1, 2016 at 11:12 PM, Petri Gynther <pgynther@xxxxxxxxxx> wrote:
>>> However, in this case, I think this handling is correct.
>>> load_gatt_db() showed "No cache for LEFQAU", so BlueZ has to
>>> re-discover everything from the device over BLE.
>>> But, since the device disconnected in the middle of discovery, BlueZ
>>> couldn't fully populate the GATT DB and has to clean it.
>>> If the device didn't disconnect so quickly, this would have most likely worked.
>>>
>>>> But I do agree that we should not reset the db if that was populated
>>>> already, so I will try to fix that.
>>>
>>> Yes, once BlueZ does not reset the GATT DB on failed reconnects, this
>>> problem will be solved.
>>
>> Please check if everything is alright when using upstream, it should
>> clear the database anymore if we get an early disconnect.
>
> I applied my 2 patches and your 2 patches on top of 5.43.
>
> GATT DB is no longer destroyed on reconnection errors, so that's excellent.
>
> However, we are still seeing reconnect problems, but not GATT DB related:
> bluez: bluetoothd[17780]:
> src/gatt-client.c:btd_gatt_client_connected() Device connected.
> bluez: bluetoothd[17780]: profiles/gap/gas.c:read_device_name_cb()
> Reading device name failed with ATT error: 0
> bluez: bluetoothd[17780]: profiles/gap/gas.c:read_appearance_cb()
> Reading appearance failed with ATT error: 0
> bluez: bluetoothd[17780]: Error reading PNP_ID value: Unexpected error code
> bluez: bluetoothd[17780]: BATT level_read_char_cb failed: Request
> attribute has encountered an unlikely error
>
> We are still investigating this. Likely a firmware issue on the remote.
>
>>
>>
>> --
>> Luiz Augusto von Dentz
> --
> To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Bluez Devel]     [Linux Wireless Networking]     [Linux Wireless Personal Area Networking]     [Linux ATH6KL]     [Linux USB Devel]     [Linux Media Drivers]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Big List of Linux Books]

  Powered by Linux