Hi Luiz,
Thanks for the quick response.
I am using btattach.
Btmon shows Bluetooth failed to set mode: Failed
It seems like there is a lot of messaging going on so communication HW wise appears ok.
Chris
-----Original Message-----
From: Luiz Augusto von Dentz <luiz.dentz@xxxxxxxxx>
Sent: Friday, March 15, 2024 3:48 PM
To: Chris Laplante <Chris.Laplante@xxxxxxxxxxxxxxxx>
Cc: linux-bluetooth@xxxxxxxxxxxxxxx
Subject: Re: Bluetoothctl Fail when typing power on
EXTERNAL EMAIL: Be careful with attachments and links.
Hi Chris,
On Fri, Mar 15, 2024 at 3:40 PM Chris Laplante <Chris.Laplante@xxxxxxxxxxxxxxxx> wrote:
>
> In BlueZ 5.65 I am able to attach. When I go into bluetoothctl I can see my device address. When I type power on I see the following error:
>
> Failed to set power on: org.bluez.Error.Failed
>
> I have found a few threads online where people had the same issue but there doesn't seem to be any common denominator.
>
> I have tried rfkill list and nothing is blocked. Regardless I still type rfkill unblock Bluetooth but I still get the error.
>
> I have tried to stop and start the Bluetooth service.
>
> systemctl stop bluetooth.service
> systemctl start bluetooth.service
>
> IS there something in the build environment that may be missing? Any suggestions?
Well if it can't be powered then there is something wrong at kernel level, does btmon show anything? Are you using btattach to set it up?
> Thanks!
> Chris
> THE INFORMATION CONTAINED IN THIS DOCUMENT IS OF A PROPRIETARY NATURE
> AND IS INTENDED TO BE KEPT CONFIDENTIAL BETWEEN THE SENDER AND THE
> INTENDED RECIPIENT. IT MAY NOT BE REPRODUCED OR USED WITHOUT EXPRESS
> WRITTEN PERMISSION OF EZURIO
>
--
Luiz Augusto von Dentz
THE INFORMATION CONTAINED IN THIS DOCUMENT IS OF A PROPRIETARY NATURE AND IS INTENDED TO BE KEPT CONFIDENTIAL BETWEEN THE SENDER AND THE INTENDED RECIPIENT. IT MAY NOT BE REPRODUCED OR USED WITHOUT EXPRESS WRITTEN PERMISSION OF EZURIO
sh-5.1# btmon
Bluetooth monitor ver 5.65
= Note: Linux version 5.15.42-mtk+ga46a21ed7edc (aarch64) 0.162007
= Note: Bluetooth subsystem version 2.22 0.162012
= New Index: 00:00:00:00:00:00 (Primary,UART,hci0) [hci0] 24.289165
= Open Index: 00:00:00:00:00:00 [hci0] 24.289218
< HCI Command: Reset (0x03|0x0003) plen 0 #1 [hci0] 24.289709
> HCI Event: Command Complete (0x0e) plen 4 #2 [hci0] 24.296801
Reset (0x03|0x0003) ncmd 1
Status: Success (0x00)
< HCI Command: Read Local Supported.. (0x04|0x0003) plen 0 #3 [hci0] 24.296892
> HCI Event: Command Complete (0x0e) plen 12 #4 [hci0] 24.299389
Read Local Supported Features (0x04|0x0003) ncmd 1
Status: Success (0x00)
Features: 0xbf 0xfe 0xcf 0xfe 0xdb 0xff 0x7b 0x87
3 slot packets
5 slot packets
Encryption
Slot offset
Timing accuracy
Role switch
Sniff mode
Power control requests
Channel quality driven data rate (CQDDR)
SCO link
HV2 packets
HV3 packets
u-law log synchronous data
A-law log synchronous data
CVSD synchronous data
Paging parameter negotiation
Power control
Transparent synchronous data
Flow control lag (most significant bit)
Broadcast Encryption
Enhanced Data Rate ACL 2 Mbps mode
Enhanced Data Rate ACL 3 Mbps mode
Enhanced inquiry scan
Interlaced inquiry scan
Interlaced page scan
RSSI with inquiry results
Extended SCO link (EV3 packets)
EV4 packets
EV5 packets
AFH capable peripheral
AFH classification peripheral
LE Supported (Controller)
3-slot Enhanced Data Rate ACL packets
5-slot Enhanced Data Rate ACL packets
Sniff subrating
Pause encryption
AFH capable central
AFH classification central
Enhanced Data Rate eSCO 2 Mbps mode
Enhanced Data Rate eSCO 3 Mbps mode
3-slot Enhanced Data Rate eSCO packets
Extended Inquiry Response
Simultaneous LE and BR/EDR (Controller)
Secure Simple Pairing
Encapsulated PDU
Erroneous Data Reporting
Non-flushable Packet Boundary Flag
Link Supervision Timeout Changed Event
Inquiry TX Power Level
Enhanced Power Control
Extended features
< HCI Command: Read Local Version I.. (0x04|0x0001) plen 0 #5 [hci0] 24.299448
> HCI Event: Command Complete (0x0e) plen 12 #6 [hci0] 24.304891
Read Local Version Information (0x04|0x0001) ncmd 1
Status: Success (0x00)
HCI version: Bluetooth 4.2 (0x08) - Revision 4096 (0x1000)
LMP version: Bluetooth 4.1 (0x07) - Subversion 8715 (0x220b)
Manufacturer: Broadcom Corporation (15)
Firmware: 001.002.011
Build: 0000
< HCI Command: Read BD ADDR (0x04|0x0009) plen 0 #7 [hci0] 24.304945
> HCI Event: Command Complete (0x0e) plen 10 #8 [hci0] 24.307177
Read BD ADDR (0x04|0x0009) ncmd 1
Status: Success (0x00)
Address: 68:71:80:D2:BE:CC (OUI 68-71-80)
< HCI Command: Read Buffer Size (0x04|0x0005) plen 0 #9 [hci0] 24.307371
> HCI Event: Command Complete (0x0e) plen 11 #10 [hci0] 24.309724
Read Buffer Size (0x04|0x0005) ncmd 1
Status: Success (0x00)
ACL MTU: 1021 ACL max packet: 8
SCO MTU: 64 SCO max packet: 1
< HCI Command: Read Class of Device (0x03|0x0023) plen 0 #11 [hci0] 24.309806
> HCI Event: Command Complete (0x0e) plen 7 #12 [hci0] 24.311911
Read Class of Device (0x03|0x0023) ncmd 1
Status: Success (0x00)
Class: 0x000000
Major class: Miscellaneous
Minor class: 0x00
< HCI Command: Read Local Name (0x03|0x0014) plen 0 #13 [hci0] 24.311954
> HCI Event: Command Complete (0x0e) plen 252 #14 [hci0] 24.335386
Read Local Name (0x03|0x0014) ncmd 1
Status: Success (0x00)
Name: BCM20703A2
< HCI Command: Read Voice Setting (0x03|0x0025) plen 0 #15 [hci0] 24.335497
> HCI Event: Command Complete (0x0e) plen 6 #16 [hci0] 24.337596
Read Voice Setting (0x03|0x0025) ncmd 1
Status: Success (0x00)
Setting: 0x0060
Input Coding: Linear
Input Data Format: 2's complement
Input Sample Size: 16-bit
# of bits padding at MSB: 0
Air Coding Format: CVSD
< HCI Command: Read Number of Supp.. (0x03|0x0038) plen 0 #17 [hci0] 24.337806
> HCI Event: Command Complete (0x0e) plen 5 #18 [hci0] 24.339867
Read Number of Supported IAC (0x03|0x0038) ncmd 1
Status: Success (0x00)
Number of IAC: 4
< HCI Command: Read Current IAC LAP (0x03|0x0039) plen 0 #19 [hci0] 24.339930
> HCI Event: Command Complete (0x0e) plen 8 #20 [hci0] 24.342197
Read Current IAC LAP (0x03|0x0039) ncmd 1
Status: Success (0x00)
Number of IAC: 1
Access code: 0x9e8b33 (General Inquiry)
< HCI Command: Set Event Filter (0x03|0x0005) plen 1 #21 [hci0] 24.342325
Type: Clear All Filters (0x00)
> HCI Event: Command Complete (0x0e) plen 4 #22 [hci0] 24.344277
Set Event Filter (0x03|0x0005) ncmd 1
Status: Success (0x00)
< HCI Command: Write Connection Ac.. (0x03|0x0016) plen 2 #23 [hci0] 24.344411
Timeout: 20000.000 msec (0x7d00)
> HCI Event: Command Complete (0x0e) plen 4 #24 [hci0] 24.346470
Write Connection Accept Timeout (0x03|0x0016) ncmd 1
Status: Success (0x00)
< HCI Command: LE Read Buffer Size (0x08|0x0002) plen 0 #25 [hci0] 24.346662
> HCI Event: Command Complete (0x0e) plen 7 #26 [hci0] 24.348837
LE Read Buffer Size (0x08|0x0002) ncmd 1
Status: Success (0x00)
Data packet length: 251
Num data packets: 15
< HCI Command: LE Read Local Suppo.. (0x08|0x0003) plen 0 #27 [hci0] 24.349052
> HCI Event: Command Complete (0x0e) plen 12 #28 [hci0] 24.351701
LE Read Local Supported Features (0x08|0x0003) ncmd 1
Status: Success (0x00)
Features: 0xff 0x00 0x00 0x00 0x00 0x00 0x00 0x00
LE Encryption
Connection Parameter Request Procedure
Extended Reject Indication
Peripheral-initiated Features Exchange
LE Ping
LE Data Packet Length Extension
LL Privacy
Extended Scanner Filter Policies
< HCI Command: LE Read Supported S.. (0x08|0x001c) plen 0 #29 [hci0] 24.351775
> HCI Event: Command Complete (0x0e) plen 12 #30 [hci0] 24.354282
LE Read Supported States (0x08|0x001c) ncmd 1
Status: Success (0x00)
States: 0x000003ffffffffff
Non-connectable Advertising State
Scannable Advertising State
Connectable Advertising State
High Duty Cycle Directed Advertising State
Passive Scanning State
Active Scanning State
Initiating State
and Connection State (Central Role)
Connection State (Peripheral Role)
Non-connectable Advertising State
and Passive Scanning State
Scannable Advertising State
and Passive Scanning State
Connectable Advertising State
and Passive Scanning State
High Duty Cycle Directed Advertising State
and Passive Scanning State
Non-connectable Advertising State
and Active Scanning State
Scannable Advertising State
and Active Scanning State
Connectable Advertising State
and Active Scanning State
High Duty Cycle Directed Advertising State
and Active Scanning State
Non-connectable Advertising State
and Initiating State
Scannable Advertising State
and Initiating State
Non-connectable Advertising State
and Connection State (Central Role)
Scannable Advertising State
and Connection State (Central Role)
Non-connectable Advertising State
and Connection State (Peripheral Role)
Scannable Advertising State
and Connection State (Peripheral Role)
Passive Scanning State
and Initiating State
Active Scanning State
and Initiating State
Passive Scanning State
and Connection State (Central Role)
Active Scanning State
and Connection State (Central Role)
Passive Scanning State
and Connection State (Peripheral Role)
Active Scanning State
and Connection State (Peripheral Role)
Initiating State
and Connection State (Central Role)
and Central Role & Central Role
Low Duty Cycle Directed Advertising State
Low Duty Cycle Directed Advertising State
and Passive Scanning State
Low Duty Cycle Directed Advertising State
and Active Scanning State
Connectable Advertising State
and Initiating State
and Central Role & Peripheral Role
High Duty Cycle Directed Advertising State
and Initiating State
and Central Role & Peripheral Role
Low Duty Cycle Directed Advertising State
and Initiating State
and Central Role & Peripheral Role
Connectable Advertising State
and Connection State (Central Role)
and Central Role & Peripheral Role
High Duty Cycle Directed Advertising State
and Connection State (Central Role)
and Central Role & Peripheral Role
Low Duty Cycle Directed Advertising State
and Connection State (Central Role)
and Central Role & Peripheral Role
Connectable Advertising State
and Connection State (Peripheral Role)
and Central Role & Peripheral Role
High Duty Cycle Directed Advertising State
and Connection State (Peripheral Role)
and Peripheral Role & Peripheral Role
Low Duty Cycle Directed Advertising State
and Connection State (Peripheral Role)
and Peripheral Role & Peripheral Role
Initiating State
and Connection State (Peripheral Role)
and Central Role & Peripheral Role
< HCI Command: Read Local Supporte.. (0x04|0x0002) plen 0 #31 [hci0] 24.354438
> HCI Event: Command Complete (0x0e) plen 68 #32 [hci0] 24.361799
Read Local Supported Commands (0x04|0x0002) ncmd 1
Status: Success (0x00)
Commands: 199 entries
Inquiry (Octet 0 - Bit 0)
Inquiry Cancel (Octet 0 - Bit 1)
Periodic Inquiry Mode (Octet 0 - Bit 2)
Exit Periodic Inquiry Mode (Octet 0 - Bit 3)
Create Connection (Octet 0 - Bit 4)
Disconnect (Octet 0 - Bit 5)
Add SCO Connection (Octet 0 - Bit 6)
Create Connection Cancel (Octet 0 - Bit 7)
Accept Connection Request (Octet 1 - Bit 0)
Reject Connection Request (Octet 1 - Bit 1)
Link Key Request Reply (Octet 1 - Bit 2)
Link Key Request Negative Reply (Octet 1 - Bit 3)
PIN Code Request Reply (Octet 1 - Bit 4)
PIN Code Request Negative Reply (Octet 1 - Bit 5)
Change Connection Packet Type (Octet 1 - Bit 6)
Authentication Requested (Octet 1 - Bit 7)
Set Connection Encryption (Octet 2 - Bit 0)
Change Connection Link Key (Octet 2 - Bit 1)
Temporary Link Key (Octet 2 - Bit 2)
Remote Name Request (Octet 2 - Bit 3)
Remote Name Request Cancel (Octet 2 - Bit 4)
Read Remote Supported Features (Octet 2 - Bit 5)
Read Remote Extended Features (Octet 2 - Bit 6)
Read Remote Version Information (Octet 2 - Bit 7)
Read Clock Offset (Octet 3 - Bit 0)
Read LMP Handle (Octet 3 - Bit 1)
Sniff Mode (Octet 4 - Bit 2)
Exit Sniff Mode (Octet 4 - Bit 3)
QoS Setup (Octet 4 - Bit 6)
Role Discovery (Octet 4 - Bit 7)
Switch Role (Octet 5 - Bit 0)
Read Link Policy Settings (Octet 5 - Bit 1)
Write Link Policy Settings (Octet 5 - Bit 2)
Read Default Link Policy Settings (Octet 5 - Bit 3)
Write Default Link Policy Settings (Octet 5 - Bit 4)
Flow Specification (Octet 5 - Bit 5)
Set Event Mask (Octet 5 - Bit 6)
Reset (Octet 5 - Bit 7)
Set Event Filter (Octet 6 - Bit 0)
Flush (Octet 6 - Bit 1)
Read PIN Type (Octet 6 - Bit 2)
Write PIN Type (Octet 6 - Bit 3)
Read Stored Link Key (Octet 6 - Bit 5)
Write Stored Link Key (Octet 6 - Bit 6)
Delete Stored Link Key (Octet 6 - Bit 7)
Write Local Name (Octet 7 - Bit 0)
Read Local Name (Octet 7 - Bit 1)
Read Connection Accept Timeout (Octet 7 - Bit 2)
Write Connection Accept Timeout (Octet 7 - Bit 3)
Read Page Timeout (Octet 7 - Bit 4)
Write Page Timeout (Octet 7 - Bit 5)
Read Scan Enable (Octet 7 - Bit 6)
Write Scan Enable (Octet 7 - Bit 7)
Read Page Scan Activity (Octet 8 - Bit 0)
Write Page Scan Activity (Octet 8 - Bit 1)
Read Inquiry Scan Activity (Octet 8 - Bit 2)
Write Inquiry Scan Activity (Octet 8 - Bit 3)
Read Authentication Enable (Octet 8 - Bit 4)
Write Authentication Enable (Octet 8 - Bit 5)
Read Encryption Mode (Octet 8 - Bit 6)
Write Encryption Mode (Octet 8 - Bit 7)
Read Class of Device (Octet 9 - Bit 0)
Write Class of Device (Octet 9 - Bit 1)
Read Voice Setting (Octet 9 - Bit 2)
Write Voice Setting (Octet 9 - Bit 3)
Read Automatic Flush Timeout (Octet 9 - Bit 4)
Write Automatic Flush Timeout (Octet 9 - Bit 5)
Read Num Broadcast Retransmissions (Octet 9 - Bit 6)
Write Num Broadcast Retransmissions (Octet 9 - Bit 7)
Read Transmit Power Level (Octet 10 - Bit 2)
Read Sync Flow Control Enable (Octet 10 - Bit 3)
Set Controller To Host Flow Control (Octet 10 - Bit 5)
Host Buffer Size (Octet 10 - Bit 6)
Host Number of Completed Packets (Octet 10 - Bit 7)
Read Link Supervision Timeout (Octet 11 - Bit 0)
Write Link Supervision Timeout (Octet 11 - Bit 1)
Read Number of Supported IAC (Octet 11 - Bit 2)
Read Current IAC LAP (Octet 11 - Bit 3)
Write Current IAC LAP (Octet 11 - Bit 4)
Set AFH Host Channel Classification (Octet 12 - Bit 1)
Read Inquiry Scan Type (Octet 12 - Bit 4)
Write Inquiry Scan Type (Octet 12 - Bit 5)
Read Inquiry Mode (Octet 12 - Bit 6)
Write Inquiry Mode (Octet 12 - Bit 7)
Read Page Scan Type (Octet 13 - Bit 0)
Write Page Scan Type (Octet 13 - Bit 1)
Read AFH Channel Assessment Mode (Octet 13 - Bit 2)
Write AFH Channel Assessment Mode (Octet 13 - Bit 3)
Read Local Version Information (Octet 14 - Bit 3)
Read Local Supported Features (Octet 14 - Bit 5)
Read Local Extended Features (Octet 14 - Bit 6)
Read Buffer Size (Octet 14 - Bit 7)
Read BD ADDR (Octet 15 - Bit 1)
Read Failed Contact Counter (Octet 15 - Bit 2)
Reset Failed Contact Counter (Octet 15 - Bit 3)
Read Link Quality (Octet 15 - Bit 4)
Read RSSI (Octet 15 - Bit 5)
Read AFH Channel Map (Octet 15 - Bit 6)
Read Clock (Octet 15 - Bit 7)
Read Loopback Mode (Octet 16 - Bit 0)
Write Loopback Mode (Octet 16 - Bit 1)
Enable Device Under Test Mode (Octet 16 - Bit 2)
Setup Synchronous Connection (Octet 16 - Bit 3)
Accept Synchronous Connection Request (Octet 16 - Bit 4)
Reject Synchronous Connection Request (Octet 16 - Bit 5)
Read Extended Inquiry Response (Octet 17 - Bit 0)
Write Extended Inquiry Response (Octet 17 - Bit 1)
Refresh Encryption Key (Octet 17 - Bit 2)
Sniff Subrating (Octet 17 - Bit 4)
Read Simple Pairing Mode (Octet 17 - Bit 5)
Write Simple Pairing Mode (Octet 17 - Bit 6)
Read Local OOB Data (Octet 17 - Bit 7)
Read Inquiry Response TX Power Level (Octet 18 - Bit 0)
Write Inquiry Transmit Power Level (Octet 18 - Bit 1)
Read Default Erroneous Data Reporting (Octet 18 - Bit 2)
Write Default Erroneous Data Reporting (Octet 18 - Bit 3)
IO Capability Request Reply (Octet 18 - Bit 7)
User Confirmation Request Reply (Octet 19 - Bit 0)
User Confirmation Request Neg Reply (Octet 19 - Bit 1)
User Passkey Request Reply (Octet 19 - Bit 2)
User Passkey Request Negative Reply (Octet 19 - Bit 3)
Remote OOB Data Request Reply (Octet 19 - Bit 4)
Write Simple Pairing Debug Mode (Octet 19 - Bit 5)
Enhanced Flush (Octet 19 - Bit 6)
Remote OOB Data Request Neg Reply (Octet 19 - Bit 7)
Send Keypress Notification (Octet 20 - Bit 2)
IO Capability Request Negative Reply (Octet 20 - Bit 3)
Read Encryption Key Size (Octet 20 - Bit 4)
Set Event Mask Page 2 (Octet 22 - Bit 2)
Read Enhanced Transmit Power Level (Octet 24 - Bit 0)
Read LE Host Supported (Octet 24 - Bit 5)
Write LE Host Supported (Octet 24 - Bit 6)
LE Set Event Mask (Octet 25 - Bit 0)
LE Read Buffer Size (Octet 25 - Bit 1)
LE Read Local Supported Features (Octet 25 - Bit 2)
LE Set Random Address (Octet 25 - Bit 4)
LE Set Advertising Parameters (Octet 25 - Bit 5)
LE Read Advertising Channel TX Power (Octet 25 - Bit 6)
LE Set Advertising Data (Octet 25 - Bit 7)
LE Set Scan Response Data (Octet 26 - Bit 0)
LE Set Advertise Enable (Octet 26 - Bit 1)
LE Set Scan Parameters (Octet 26 - Bit 2)
LE Set Scan Enable (Octet 26 - Bit 3)
LE Create Connection (Octet 26 - Bit 4)
LE Create Connection Cancel (Octet 26 - Bit 5)
LE Read Accept List Size (Octet 26 - Bit 6)
LE Clear Accept List (Octet 26 - Bit 7)
LE Add Device To Accept List (Octet 27 - Bit 0)
LE Remove Device From Accept List (Octet 27 - Bit 1)
LE Connection Update (Octet 27 - Bit 2)
LE Set Host Channel Classification (Octet 27 - Bit 3)
LE Read Channel Map (Octet 27 - Bit 4)
LE Read Remote Used Features (Octet 27 - Bit 5)
LE Encrypt (Octet 27 - Bit 6)
LE Rand (Octet 27 - Bit 7)
LE Start Encryption (Octet 28 - Bit 0)
LE Long Term Key Request Reply (Octet 28 - Bit 1)
LE Long Term Key Request Neg Reply (Octet 28 - Bit 2)
LE Read Supported States (Octet 28 - Bit 3)
LE Receiver Test (Octet 28 - Bit 4)
LE Transmitter Test (Octet 28 - Bit 5)
LE Test End (Octet 28 - Bit 6)
Enhanced Setup Synchronous Connection (Octet 29 - Bit 3)
Enhanced Accept Synchronous Connection Request (Octet 29 - Bit 4)
Read Local Supported Codecs (Octet 29 - Bit 5)
Set MWS Channel Parameters (Octet 29 - Bit 6)
Set External Frame Configuration (Octet 29 - Bit 7)
Set MWS Signaling (Octet 30 - Bit 0)
Set MWS Transport Layer (Octet 30 - Bit 1)
Set MWS Scan Frequency Table (Octet 30 - Bit 2)
Get MWS Transport Layer Configuration (Octet 30 - Bit 3)
Set MWS Pattern Configuration (Octet 30 - Bit 4)
Remote OOB Extended Data Request Reply (Octet 32 - Bit 1)
Read Secure Connections Host Support (Octet 32 - Bit 2)
Write Secure Connections Host Support (Octet 32 - Bit 3)
Read Authenticated Payload Timeout (Octet 32 - Bit 4)
Write Authenticated Payload Timeout (Octet 32 - Bit 5)
Read Local OOB Extended Data (Octet 32 - Bit 6)
Write Secure Connections Test Mode (Octet 32 - Bit 7)
Read Extended Page Timeout (Octet 33 - Bit 0)
Write Extended Page Timeout (Octet 33 - Bit 1)
Read Extended Inquiry Length (Octet 33 - Bit 2)
Write Extended Inquiry Length (Octet 33 - Bit 3)
LE Remote Connection Parameter Request Reply (Octet 33 - Bit 4)
LE Remote Connection Parameter Request Negative Reply (Octet 33 - Bit 5)
LE Set Data Length (Octet 33 - Bit 6)
LE Read Suggested Default Data Length (Octet 33 - Bit 7)
LE Write Suggested Default Data Length (Octet 34 - Bit 0)
LE Read Local P-256 Public Key (Octet 34 - Bit 1)
LE Generate DHKey (Octet 34 - Bit 2)
LE Add Device To Resolving List (Octet 34 - Bit 3)
LE Remove Device From Resolving List (Octet 34 - Bit 4)
LE Clear Resolving List (Octet 34 - Bit 5)
LE Read Resolving List Size (Octet 34 - Bit 6)
LE Read Peer Resolvable Address (Octet 34 - Bit 7)
LE Read Local Resolvable Address (Octet 35 - Bit 0)
LE Set Address Resolution Enable (Octet 35 - Bit 1)
LE Set Resolvable Private Address Timeout (Octet 35 - Bit 2)
LE Read Maximum Data Length (Octet 35 - Bit 3)
< HCI Command: Write Extended In.. (0x03|0x0052) plen 241 #33 [hci0] 24.361874
FEC: Not required (0x00)
> HCI Event: Command Complete (0x0e) plen 4 #34 [hci0] 24.384654
Write Extended Inquiry Response (0x03|0x0052) ncmd 1
Status: Success (0x00)
< HCI Command: Write Inquiry Mode (0x03|0x0045) plen 1 #35 [hci0] 24.384882
Mode: Inquiry Result with RSSI or Extended Inquiry Result (0x02)
> HCI Event: Command Complete (0x0e) plen 4 #36 [hci0] 24.386818
Write Inquiry Mode (0x03|0x0045) ncmd 1
Status: Success (0x00)
< HCI Command: Read Inquiry Respon.. (0x03|0x0058) plen 0 #37 [hci0] 24.387040
= bluetoothd: Bluetooth daemon 5.65 24.388082
> HCI Event: Command Complete (0x0e) plen 5 #38 [hci0] 24.389407
Read Inquiry Response TX Power Level (0x03|0x0058) ncmd 1
Status: Success (0x00)
TX power: 0 dbm (0x00)
< HCI Command: Read Local Extended.. (0x04|0x0004) plen 1 #39 [hci0] 24.389521
Page: 1
> HCI Event: Command Complete (0x0e) plen 14 #40 [hci0] 24.392396
Read Local Extended Features (0x04|0x0004) ncmd 1
Status: Success (0x00)
Page: 1/2
Features: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
< HCI Command: Set Event Mask (0x03|0x0001) plen 8 #41 [hci0] 24.392615
Mask: 0x3dbff807fffbffff
Inquiry Complete
Inquiry Result
Connection Complete
Connection Request
Disconnection Complete
Authentication Complete
Remote Name Request Complete
Encryption Change
Change Connection Link Key Complete
Link Key Type Changed
Read Remote Supported Features Complete
Read Remote Version Information Complete
QoS Setup Complete
Command Complete
Command Status
Hardware Error
Flush Occurred
Role Change
Mode Change
Return Link Keys
PIN Code Request
Link Key Request
Link Key Notification
Loopback Command
Data Buffer Overflow
Max Slots Change
Read Clock Offset Complete
Connection Packet Type Changed
QoS Violation
Page Scan Mode Change
Page Scan Repetition Mode Change
Flow Specification Complete
Inquiry Result with RSSI
Read Remote Extended Features Complete
Synchronous Connection Complete
Synchronous Connection Changed
Sniff Subrating
Extended Inquiry Result
Encryption Key Refresh Complete
IO Capability Request
IO Capability Request Reply
User Confirmation Request
User Passkey Request
Remote OOB Data Request
Simple Pairing Complete
Link Supervision Timeout Changed
Enhanced Flush Complete
User Passkey Notification
Keypress Notification
Remote Host Supported Features Notification
LE Meta
> HCI Event: Command Complete (0x0e) plen 4 #42 [hci0] 24.395125
Set Event Mask (0x03|0x0001) ncmd 1
Status: Success (0x00)
< HCI Command: Read Stored Link Key (0x03|0x000d) plen 7 #43 [hci0] 24.395209
Address: 00:00:00:00:00:00 (OUI 00-00-00)
Read all: 0x01
> HCI Event: Command Complete (0x0e) plen 8 #44 [hci0] 24.398042
Read Stored Link Key (0x03|0x000d) ncmd 1
Status: Success (0x00)
Max num keys: 1
Num keys: 0
< HCI Command: Write Default Link... (0x02|0x000f) plen 2 #45 [hci0] 24.398123
Link policy: 0x0005
Enable Role Switch
Enable Sniff Mode
> HCI Event: Command Complete (0x0e) plen 4 #46 [hci0] 24.400132
Write Default Link Policy Settings (0x02|0x000f) ncmd 1
Status: Success (0x00)
< HCI Command: Read Page Scan Acti.. (0x03|0x001b) plen 0 #47 [hci0] 24.400210
> HCI Event: Command Complete (0x0e) plen 8 #48 [hci0] 24.402368
Read Page Scan Activity (0x03|0x001b) ncmd 1
Status: Success (0x00)
Interval: 1280.000 msec (0x0800)
Window: 11.250 msec (0x0012)
< HCI Command: Read Default Errone.. (0x03|0x005a) plen 0 #49 [hci0] 24.402473
> HCI Event: Command Complete (0x0e) plen 5 #50 [hci0] 24.404470
Read Default Erroneous Data Reporting (0x03|0x005a) ncmd 1
Status: Success (0x00)
Mode: Disabled (0x00)
< HCI Command: Read Page Scan Type (0x03|0x0046) plen 0 #51 [hci0] 24.404659
> HCI Event: Command Complete (0x0e) plen 5 #52 [hci0] 24.406622
Read Page Scan Type (0x03|0x0046) ncmd 1
Status: Success (0x00)
Type: Standard Scan (0x00)
< HCI Command: LE Set Event Mask (0x08|0x0001) plen 8 #53 [hci0] 24.406712
Mask: 0x00000000000007ff
LE Connection Complete
LE Advertising Report
LE Connection Update Complete
LE Read Remote Used Features Complete
LE Long Term Key Request
LE Remote Connection Parameter Request
LE Data Length Change
LE Read Local P-256 Public Key Complete
LE Generate DHKey Complete
LE Enhanced Connection Complete
LE Direct Advertising Report
@ MGMT Open: bluetoothd (privileged) version 1.21 {0x0001} 24.407305
= bluetoothd: Starting SDP server 24.408313
> HCI Event: Command Complete (0x0e) plen 4 #54 [hci0] 24.409208
LE Set Event Mask (0x08|0x0001) ncmd 1
Status: Success (0x00)
< HCI Command: LE Read Advertising.. (0x08|0x0007) plen 0 #55 [hci0] 24.409300
> HCI Event: Command Complete (0x0e) plen 5 #56 [hci0] 24.411214
LE Read Advertising Channel TX Power (0x08|0x0007) ncmd 1
Status: Success (0x00)
TX power: 12 dbm (0x0c)
< HCI Command: LE Read Accept List.. (0x08|0x000f) plen 0 #57 [hci0] 24.411397
> HCI Event: Command Complete (0x0e) plen 5 #58 [hci0] 24.413230
LE Read Accept List Size (0x08|0x000f) ncmd 1
Status: Success (0x00)
Size: 128
< HCI Command: LE Clear Accept List (0x08|0x0010) plen 0 #59 [hci0] 24.413324
= bluetoothd: ../bluez-5.65/profiles/network/bnep.c:bnep_init() k.. 24.413900
= bluetoothd: ../bluez-5.65/src/plugin.c:plugin_init() System doe.. 24.413967
> HCI Event: Command Complete (0x0e) plen 4 #60 [hci0] 24.415197
LE Clear Accept List (0x08|0x0010) ncmd 1
Status: Success (0x00)
< HCI Command: LE Read Resolving L.. (0x08|0x002a) plen 0 #61 [hci0] 24.415244
> HCI Event: Command Complete (0x0e) plen 5 #62 [hci0] 24.417175
LE Read Resolving List Size (0x08|0x002a) ncmd 1
Status: Success (0x00)
Size: 128
< HCI Command: LE Clear Resolving... (0x08|0x0029) plen 0 #63 [hci0] 24.417222
> HCI Event: Command Complete (0x0e) plen 4 #64 [hci0] 24.419355
LE Clear Resolving List (0x08|0x0029) ncmd 1
Status: Success (0x00)
< HCI Command: LE Set Resolvable P.. (0x08|0x002e) plen 2 #65 [hci0] 24.419406
Timeout: 900 seconds
> HCI Event: Command Complete (0x0e) plen 4 #66 [hci0] 24.421458
LE Set Resolvable Private Address Timeout (0x08|0x002e) ncmd 1
Status: Success (0x00)
< HCI Command: LE Read Maximum Dat.. (0x08|0x002f) plen 0 #67 [hci0] 24.421510
> HCI Event: Command Complete (0x0e) plen 12 #68 [hci0] 24.424014
LE Read Maximum Data Length (0x08|0x002f) ncmd 1
Status: Success (0x00)
Max TX octets: 251
Max TX time: 2120
Max RX octets: 251
Max RX time: 2120
< HCI Command: LE Read Suggested D.. (0x08|0x0023) plen 0 #69 [hci0] 24.424055
@ MGMT Command: Read Management Version I.. (0x0001) plen 0 {0x0001} 24.425285
@ MGMT Event: Command Complete (0x0001) plen 6 {0x0001} 24.425291
Read Management Version Information (0x0001) plen 3
Status: Success (0x00)
Version: 1.21
= bluetoothd: Bluetooth management interface 1.21 initialized 24.425455
@ MGMT Command: Read Management Supported.. (0x0002) plen 0 {0x0001} 24.425362
@ MGMT Event: Command Complete (0x0001) plen 259 {0x0001} 24.425366
Read Management Supported Commands (0x0002) plen 256
Status: Success (0x00)
Commands: 84
Read Controller Index List (0x0003)
Read Controller Information (0x0004)
Set Powered (0x0005)
Set Discoverable (0x0006)
Set Connectable (0x0007)
Set Fast Connectable (0x0008)
Set Bondable (0x0009)
Set Link Security (0x000a)
Set Secure Simple Pairing (0x000b)
Set High Speed (0x000c)
Set Low Energy (0x000d)
Set Device Class (0x000e)
Set Local Name (0x000f)
Add UUID (0x0010)
Remove UUID (0x0011)
Load Link Keys (0x0012)
Load Long Term Keys (0x0013)
Disconnect (0x0014)
Get Connections (0x0015)
PIN Code Reply (0x0016)
PIN Code Negative Reply (0x0017)
Set IO Capability (0x0018)
Pair Device (0x0019)
Cancel Pair Device (0x001a)
Unpair Device (0x001b)
User Confirmation Reply (0x001c)
User Confirmation Negative Reply (0x001d)
User Passkey Reply (0x001e)
User Passkey Negative Reply (0x001f)
Read Local Out Of Band Data (0x0020)
Add Remote Out Of Band Data (0x0021)
Remove Remote Out Of Band Data (0x0022)
Start Discovery (0x0023)
Stop Discovery (0x0024)
Confirm Name (0x0025)
Block Device (0x0026)
Unblock Device (0x0027)
Set Device ID (0x0028)
Set Advertising (0x0029)
Set BR/EDR (0x002a)
Set Static Address (0x002b)
Set Scan Parameters (0x002c)
Set Secure Connections (0x002d)
Set Debug Keys (0x002e)
Set Privacy (0x002f)
Load Identity Resolving Keys (0x0030)
Get Connection Information (0x0031)
Get Clock Information (0x0032)
Add Device (0x0033)
Remove Device (0x0034)
Load Connection Parameters (0x0035)
Read Unconfigured Controller Index List (0x0036)
Read Controller Configuration Information (0x0037)
Set External Configuration (0x0038)
Set Public Address (0x0039)
Start Service Discovery (0x003a)
Read Local Out Of Band Extended Data (0x003b)
Read Extended Controller Index List (0x003c)
Read Advertising Features (0x003d)
Add Advertising (0x003e)
Remove Advertising (0x003f)
Get Advertising Size Information (0x0040)
Start Limited Discovery (0x0041)
Read Extended Controller Information (0x0042)
Set Appearance (0x0043)
Get PHY Configuration (0x0044)
Set PHY Configuration (0x0045)
Load Blocked Keys (0x0046)
Set Wideband Speech (0x0047)
Read Controller Capabilities (0x0048)
Read Experimental Features Information (0x0049)
Set Experimental Feature (0x004a)
Read Default System Configuration (0x004b)
Set Default System Configuration (0x004c)
Read Default Runtime Configuration (0x004d)
Set Default Runtime Configuration (0x004e)
Get Device Flags (0x004f)
Set Device Flags (0x0050)
Read Advertisement Monitor Features (0x0051)
Add Advertisement Patterns Monitor (0x0052)
Remove Advertisement Monitor (0x0053)
Add Extended Advertising Parameters (0x0054)
Add Extended Advertising Data (0x0055)
Add Advertisement Patterns Monitor With RSSI Threshold (0x0056)
Events: 42
Controller Error (0x0003)
Index Added (0x0004)
Index Removed (0x0005)
New Settings (0x0006)
Class Of Device Changed (0x0007)
Local Name Changed (0x0008)
New Link Key (0x0009)
New Long Term Key (0x000a)
Device Connected (0x000b)
Device Disconnected (0x000c)
Connect Failed (0x000d)
PIN Code Request (0x000e)
User Confirmation Request (0x000f)
User Passkey Request (0x0010)
Authentication Failed (0x0011)
Device Found (0x0012)
Discovering (0x0013)
Device Blocked (0x0014)
Device Unblocked (0x0015)
Device Unpaired (0x0016)
Passkey Notify (0x0017)
New Identity Resolving Key (0x0018)
New Signature Resolving Key (0x0019)
Device Added (0x001a)
Device Removed (0x001b)
New Connection Parameter (0x001c)
Unconfigured Index Added (0x001d)
Unconfigured Index Removed (0x001e)
New Configuration Options (0x001f)
Extended Index Added (0x0020)
Extended Index Removed (0x0021)
Local Out Of Band Extended Data Updated (0x0022)
Advertising Added (0x0023)
Advertising Removed (0x0024)
Extended Controller Information Changed (0x0025)
PHY Configuration Changed (0x0026)
Experimental Feature Changed (0x0027)
Device Flags Changed (0x002a)
Advertisement Monitor Added (0x002b)
Advertisement Monitor Removed (0x002c)
Controller Suspended (0x002d)
Controller Resumed (0x002e)
@ MGMT Command: Read Controller Index List (0x0003) plen 0 {0x0001} 24.425385
@ MGMT Event: Command Complete (0x0001) plen 5 {0x0001} 24.425387
Read Controller Index List (0x0003) plen 2
Status: Success (0x00)
Controllers: 0
> HCI Event: Command Complete (0x0e) plen 8 #70 [hci0] 24.427148
LE Read Suggested Default Data Length (0x08|0x0023) ncmd 1
Status: Success (0x00)
TX octets: 27
TX time: 328
< HCI Command: Read Local Extended.. (0x04|0x0004) plen 1 #71 [hci0] 24.427339
Page: 2
> HCI Event: Command Complete (0x0e) plen 14 #72 [hci0] 24.430095
Read Local Extended Features (0x04|0x0004) ncmd 1
Status: Success (0x00)
Page: 2/2
Features: 0x30 0x0b 0x00 0x00 0x00 0x00 0x00 0x00
Inquiry Response Notification Event
Generalized interlaced scan
Secure Connections (Controller Support)
Ping
Train nudging
< HCI Command: Delete Stored Link... (0x03|0x0012) plen 7 #73 [hci0] 24.430246
Address: 00:00:00:00:00:00 (OUI 00-00-00)
Delete all: 0x01
> HCI Event: Command Complete (0x0e) plen 6 #74 [hci0] 24.432825
Delete Stored Link Key (0x03|0x0012) ncmd 1
Status: Success (0x00)
Num keys: 0
< HCI Command: Set Event Mask Page 2 (0x03|0x0063) plen 8 #75 [hci0] 24.432922
Mask: 0x0000000000800000
Authenticated Payload Timeout Expired
> HCI Event: Command Complete (0x0e) plen 4 #76 [hci0] 24.435534
Set Event Mask Page 2 (0x03|0x0063) ncmd 1
Status: Success (0x00)
< HCI Command: Read Local Supporte.. (0x04|0x000b) plen 0 #77 [hci0] 24.435651
> HCI Event: Command Complete (0x0e) plen 12 #78 [hci0] 24.438274
Read Local Supported Codecs (0x04|0x000b) ncmd 1
Status: Success (0x00)
Number of supported codecs: 6
Codec: u-law log (0x00)
Codec: A-law log (0x01)
Codec: CVSD (0x02)
Codec: Transparent (0x03)
Codec: Linear PCM (0x04)
Codec: mSBC (0x05)
Number of vendor codecs: 0
< HCI Command: Get MWS Transport L.. (0x05|0x000c) plen 0 #79 [hci0] 24.438429
> HCI Event: Command Complete (0x0e) plen 15 #80 [hci0] 24.441296
Get MWS Transport Layer Configuration (0x05|0x000c) ncmd 1
Status: Success (0x00)
Number of transports: 1
Transport layer: WCI-2 (0x02)
Number of baud rates: 1
Baud rate list: 1 entry
Bluetooth to MWS: 4000000
MWS to Bluetooth: 4000000
< HCI Command: LE Write Suggested... (0x08|0x0024) plen 4 #81 [hci0] 24.441370
TX octets: 251
TX time: 2120
> HCI Event: Command Complete (0x0e) plen 4 #82 [hci0] 24.443600
LE Write Suggested Default Data Length (0x08|0x0024) ncmd 1
Status: Success (0x00)
= Index Info: 68:71:80:D2:BE:CC (Broadcom Corporation) [hci0] 24.443708
@ MGMT Event: Index Added (0x0004) plen 0 {0x0001} [hci0] 24.443721
@ MGMT Command: Remove Advertiseme.. (0x0053) plen 2 {0x0001} [hci0] 24.443970
Handle: 0
@ MGMT Event: Command Complete (0x0001) plen 5 {0x0001} [hci0] 24.443984
Remove Advertisement Monitor (0x0053) plen 2
Status: Success (0x00)
Handle: 0
@ MGMT Command: Read Experimental... (0x0049) plen 0 {0x0001} [hci0] 24.444061
@ MGMT Event: Command Complete (0x0001) plen 45 {0x0001} [hci0] 24.444065
Read Experimental Features Information (0x0049) plen 42
Status: Success (0x00)
Features: 2
UUID: BlueZ Experimental Simultaneous Central and Peripheral
Flags: 0x00000000
UUID: BlueZ Experimental LL privacy
Flags: 0x00000002
Settings change
@ MGMT Command: Read Controller In.. (0x0004) plen 0 {0x0001} [hci0] 24.444096
@ MGMT Event: Command Complete (0x0001) plen 283 {0x0001} [hci0] 24.444101
Read Controller Information (0x0004) plen 280
Status: Success (0x00)
Address: 68:71:80:D2:BE:CC (OUI 68-71-80)
Version: Bluetooth 4.2 (0x08)
Manufacturer: Broadcom Corporation (15)
Supported settings: 0x0001beff
Powered
Connectable
Fast Connectable
Discoverable
Bondable
Link Security
Secure Simple Pairing
BR/EDR
Low Energy
Advertising
Secure Connections
Debug Keys
Privacy
Static Address
PHY Configuration
Current settings: 0x00000080
BR/EDR
Class: 0x000000
Major class: Miscellaneous
Minor class: 0x00
Name: BCM20703A2
Short name:
= bluetoothd: ../bluez-5.65/src/profile.c:ext_start_servers() RFC.. 24.452725
@ MGMT Command: Remove UUID (0x0011) plen 16 {0x0001} [hci0] 24.452861
UUID: Vendor specific
@ MGMT Event: Command Complete (0x0001) plen 6 {0x0001} [hci0] 24.452875
Remove UUID (0x0011) plen 3
Status: Success (0x00)
Class: 0x000000
Major class: Miscellaneous
Minor class: 0x00
@ MGMT Command: Remove Device (0x0034) plen 7 {0x0001} [hci0] 24.452940
BR/EDR Address: 00:00:00:00:00:00 (OUI 00-00-00)
@ MGMT Event: Command Complete (0x0001) plen 10 {0x0001} [hci0] 24.452949
Remove Device (0x0034) plen 7
Status: Success (0x00)
BR/EDR Address: 00:00:00:00:00:00 (OUI 00-00-00)
@ MGMT Command: Set Secure Simple... (0x000b) plen 1 {0x0001} [hci0] 24.452993
Secure Simple Pairing: Enabled (0x01)
@ MGMT Event: Command Complete (0x0001) plen 7 {0x0001} [hci0] 24.452997
Set Secure Simple Pairing (0x000b) plen 4
Status: Success (0x00)
Current settings: 0x000000c0
Secure Simple Pairing
BR/EDR
@ MGMT Command: Set Low Energy (0x000d) plen 1 {0x0001} [hci0] 24.453040
Low Energy: Enabled (0x01)
@ MGMT Event: Command Complete (0x0001) plen 7 {0x0001} [hci0] 24.453043
Set Low Energy (0x000d) plen 4
Status: Success (0x00)
Current settings: 0x000002c0
Secure Simple Pairing
BR/EDR
Low Energy
@ MGMT Command: Set Secure Connect.. (0x002d) plen 1 {0x0001} [hci0] 24.453088
Secure Connections: Enabled (0x01)
@ MGMT Event: Command Complete (0x0001) plen 7 {0x0001} [hci0] 24.453091
Set Secure Connections (0x002d) plen 4
Status: Success (0x00)
Current settings: 0x00000ac0
Secure Simple Pairing
BR/EDR
Low Energy
Secure Connections
@ MGMT Command: Set Privacy (0x002f) plen 17 {0x0001} [hci0] 24.453130
Privacy: Disabled (0x00)
Key: 00000000000000000000000000000000
@ MGMT Event: Command Complete (0x0001) plen 7 {0x0001} [hci0] 24.453133
Set Privacy (0x002f) plen 4
Status: Success (0x00)
Current settings: 0x00000ac0
Secure Simple Pairing
BR/EDR
Low Energy
Secure Connections
@ MGMT Command: Add UUID (0x0010) plen 17 {0x0001} [hci0] 24.453171
UUID: Generic Access Profile
Service class: 0x00
@ MGMT Event: Command Complete (0x0001) plen 6 {0x0001} [hci0] 24.453175
Add UUID (0x0010) plen 3
Status: Success (0x00)
Class: 0x000000
Major class: Miscellaneous
Minor class: 0x00
@ MGMT Command: Add UUID (0x0010) plen 17 {0x0001} [hci0] 24.453229
UUID: Generic Attribute Profile
Service class: 0x00
@ MGMT Event: Command Complete (0x0001) plen 6 {0x0001} [hci0] 24.453232
Add UUID (0x0010) plen 3
Status: Success (0x00)
Class: 0x000000
Major class: Miscellaneous
Minor class: 0x00
@ MGMT Command: Add UUID (0x0010) plen 17 {0x0001} [hci0] 24.453274
UUID: Device Information
Service class: 0x00
@ MGMT Event: Command Complete (0x0001) plen 6 {0x0001} [hci0] 24.453277
Add UUID (0x0010) plen 3
Status: Success (0x00)
Class: 0x000000
Major class: Miscellaneous
Minor class: 0x00
@ MGMT Command: Read Advertising F.. (0x003d) plen 0 {0x0001} [hci0] 24.453317
@ MGMT Event: Command Complete (0x0001) plen 11 {0x0001} [hci0] 24.453320
Read Advertising Features (0x003d) plen 8
Status: Success (0x00)
Flags: 0x0001f07f
Switch into Connectable mode
Advertise as Discoverable
Advertise as Limited Discoverable
Add Flags field to Advertising Data
Add TX Power field to Advertising Data
Add Appearance field to Scan Response
Add Local Name in Scan Response
Use provided duration parameter
Use provided timeout parameter
Use provided interval parameters
Use provided tx power parameter
Contain Scan Response Data
Advertising data length: 31
Scan response length: 31
Max instances: 5
Instances: 0
@ MGMT Command: Add UUID (0x0010) plen 17 {0x0001} [hci0] 24.453386
UUID: A/V Remote Control
Service class: 0x00
@ MGMT Event: Command Complete (0x0001) plen 6 {0x0001} [hci0] 24.453389
Add UUID (0x0010) plen 3
Status: Success (0x00)
Class: 0x000000
Major class: Miscellaneous
Minor class: 0x00
@ MGMT Command: Add UUID (0x0010) plen 17 {0x0001} [hci0] 24.453433
UUID: A/V Remote Control Target
Service class: 0x00
@ MGMT Event: Command Complete (0x0001) plen 6 {0x0001} [hci0] 24.453436
Add UUID (0x0010) plen 3
Status: Success (0x00)
Class: 0x000000
Major class: Miscellaneous
Minor class: 0x00
@ MGMT Command: Unblock Device (0x0027) plen 7 {0x0001} [hci0] 24.453476
BR/EDR Address: 00:00:00:00:00:00 (OUI 00-00-00)
@ MGMT Event: Command Complete (0x0001) plen 10 {0x0001} [hci0] 24.453481
Unblock Device (0x0027) plen 7
Status: Success (0x00)
BR/EDR Address: 00:00:00:00:00:00 (OUI 00-00-00)
@ MGMT Command: Load Link Keys (0x0012) plen 3 {0x0001} [hci0] 24.453518
Debug keys: Disabled (0x00)
Keys: 0
@ MGMT Event: Command Complete (0x0001) plen 3 {0x0001} [hci0] 24.453521
Load Link Keys (0x0012) plen 0
Status: Success (0x00)
@ MGMT Command: Load Long Term Keys (0x0013) plen 2 {0x0001} [hci0] 24.453558
Keys: 0
@ MGMT Event: Command Complete (0x0001) plen 3 {0x0001} [hci0] 24.453561
Load Long Term Keys (0x0013) plen 0
Status: Success (0x00)
@ MGMT Command: Load Identity Reso.. (0x0030) plen 2 {0x0001} [hci0] 24.453609
Keys: 0
@ MGMT Event: Command Complete (0x0001) plen 3 {0x0001} [hci0] 24.453612
Load Identity Resolving Keys (0x0030) plen 0
Status: Success (0x00)
@ MGMT Command: Load Connection Pa.. (0x0035) plen 2 {0x0001} [hci0] 24.453649
Parameters: 0
@ MGMT Event: Command Complete (0x0001) plen 3 {0x0001} [hci0] 24.453652
Load Connection Parameters (0x0035) plen 0
Status: Success (0x00)
@ MGMT Command: Add UUID (0x0010) plen 17 {0x0001} [hci0] 24.453690
UUID: PnP Information
Service class: 0x00
@ MGMT Event: Command Complete (0x0001) plen 6 {0x0001} [hci0] 24.453693
Add UUID (0x0010) plen 3
Status: Success (0x00)
Class: 0x000000
Major class: Miscellaneous
Minor class: 0x00
@ MGMT Command: Set Device ID (0x0028) plen 8 {0x0001} [hci0] 24.453734
Device ID: USB Implementer's Forum assigned (0x0002)
Vendor: Linux Foundation (0x1d6b)
Product: 0x0246
Version: 5.4.1 (0x0541)
@ MGMT Event: Command Complete (0x0001) plen 3 {0x0001} [hci0] 24.453737
Set Device ID (0x0028) plen 0
Status: Success (0x00)
@ MGMT Command: Set Device Class (0x000e) plen 2 {0x0001} [hci0] 24.453775
Major class: 0x00
Minor class: 0x00
@ MGMT Event: Command Complete (0x0001) plen 6 {0x0001} [hci0] 24.453778
Set Device Class (0x000e) plen 3
Status: Success (0x00)
Class: 0x000000
Major class: Miscellaneous
Minor class: 0x00
@ MGMT Command: Set Local Name (0x000f) plen 260 {0x0001} [hci0] 24.453817
Name: BlueZ 5.65
Short name:
@ MGMT Event: Command Complete (0x0001) plen 263 {0x0001} [hci0] 24.453820
Set Local Name (0x000f) plen 260
Status: Success (0x00)
Name: BlueZ 5.65
Short name:
@ MGMT Command: Load Blocked Keys (0x0046) plen 36 {0x0001} [hci0] 24.453866
02 00 01 bf 01 fb 9d 4e f3 bc 36 d8 74 f5 39 41 .......N..6.t.9A
38 68 4c 02 a5 99 ba e4 e1 7c a6 18 22 8e 07 56 8hL......|.."..V
b4 e8 5f 01 .._.
@ MGMT Event: Command Complete (0x0001) plen 3 {0x0001} [hci0] 24.453869
Load Blocked Keys (0x0046) plen 0
Status: Success (0x00)
@ MGMT Command: Set Local Name (0x000f) plen 260 {0x0001} [hci0] 24.568164
Name: genio-700-evk
Short name:
@ MGMT Event: Command Complete (0x0001) plen 263 {0x0001} [hci0] 24.568221
Set Local Name (0x000f) plen 260
Status: Success (0x00)
Name: genio-700-evk
Short name:
= Close Index: 68:71:80:D2:BE:CC [hci0] 26.460473
@ MGMT Command: Set Powered (0x0005) plen 1 {0x0001} [hci0] 37.505479
Powered: Enabled (0x01)
= Open Index: 68:71:80:D2:BE:CC [hci0] 37.505642
< HCI Command: Reset (0x03|0x0003) plen 0 #83 [hci0] 37.505694
> HCI Event: Hardware Error (0x10) plen 1 #84 [hci0] 37.507119
Code: 0x00
= Close Index: 68:71:80:D2:BE:CC [hci0] 47.644375
@ MGMT Event: Command Status (0x0002) plen 3 {0x0001} [hci0] 47.644436
Set Powered (0x0005)
Status: Failed (0x03)
= Open Index: 68:71:80:D2:BE:CC [hci0] 47.644545
< HCI Command: Reset (0x03|0x0003) plen 0 #85 [hci0] 47.644622
= bluetoothd: Failed to set mode: Failed (0x03) [hci0] 47.645064
= Close Index: 68:71:80:D2:BE:CC [hci0] 57.884411
