This patch implements the zone reset all operation for sd_zbc.c. We add
a new boolean parameter for the sd_zbc_setup_reset_cmd() to indicate
REQ_OP_ZONE_RESET_ALL command setup. Along with that we add support in
the completion path for the zone reset all.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@xxxxxxx>
---
drivers/scsi/sd.c | 7 ++++++-
drivers/scsi/sd.h | 5 +++--
drivers/scsi/sd_zbc.c | 9 +++++++--
3 files changed, 16 insertions(+), 5 deletions(-)
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index a3406bd62391..620a6d743952 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -1292,7 +1292,9 @@ static blk_status_t sd_init_command(struct scsi_cmnd *cmd)
case REQ_OP_WRITE:
return sd_setup_read_write_cmnd(cmd);
case REQ_OP_ZONE_RESET:
- return sd_zbc_setup_reset_cmnd(cmd);
+ return sd_zbc_setup_reset_cmnd(cmd, false);
+ case REQ_OP_ZONE_RESET_ALL:
+ return sd_zbc_setup_reset_cmnd(cmd, true);
default:
WARN_ON_ONCE(1);
return BLK_STS_NOTSUPP;
@@ -1958,6 +1960,7 @@ static int sd_done(struct scsi_cmnd *SCpnt)
case REQ_OP_WRITE_ZEROES:
case REQ_OP_WRITE_SAME:
case REQ_OP_ZONE_RESET:
+ case REQ_OP_ZONE_RESET_ALL:
if (!result) {
good_bytes = blk_rq_bytes(req);
scsi_set_resid(SCpnt, 0);
@@ -2948,6 +2951,8 @@ static void sd_read_block_characteristics(struct scsi_disk *sdkp)
*/
q->limits.zoned = BLK_ZONED_NONE;
}
+ if (q->limits.zoned != BLK_ZONED_NONE)
+ blk_queue_flag_set(QUEUE_FLAG_ZONE_RESETALL, q);
if (blk_queue_is_zoned(q) && sdkp->first_scan)
sd_printk(KERN_NOTICE, sdkp, "Host-%s zoned block device\n",
q->limits.zoned == BLK_ZONED_HM ? "managed" : "aware");
diff --git a/drivers/scsi/sd.h b/drivers/scsi/sd.h
index 38c50946fc42..1eab779f812b 100644
--- a/drivers/scsi/sd.h
+++ b/drivers/scsi/sd.h
@@ -209,7 +209,7 @@ static inline int sd_is_zoned(struct scsi_disk *sdkp)
extern int sd_zbc_read_zones(struct scsi_disk *sdkp, unsigned char *buffer);
extern void sd_zbc_print_zones(struct scsi_disk *sdkp);
-extern blk_status_t sd_zbc_setup_reset_cmnd(struct scsi_cmnd *cmd);
+extern blk_status_t sd_zbc_setup_reset_cmnd(struct scsi_cmnd *cmd, bool all);
extern void sd_zbc_complete(struct scsi_cmnd *cmd, unsigned int good_bytes,
struct scsi_sense_hdr *sshdr);
extern int sd_zbc_report_zones(struct gendisk *disk, sector_t sector,
@@ -225,7 +225,8 @@ static inline int sd_zbc_read_zones(struct scsi_disk *sdkp,
static inline void sd_zbc_print_zones(struct scsi_disk *sdkp) {}
-static inline blk_status_t sd_zbc_setup_reset_cmnd(struct scsi_cmnd *cmd)
+static inline blk_status_t sd_zbc_setup_reset_cmnd(struct scsi_cmnd *cmd,
+ bool all)
{
return BLK_STS_TARGET;
}
diff --git a/drivers/scsi/sd_zbc.c b/drivers/scsi/sd_zbc.c
index db16c19e05c4..538216b9e1f4 100644
--- a/drivers/scsi/sd_zbc.c
+++ b/drivers/scsi/sd_zbc.c
@@ -209,10 +209,11 @@ static inline sector_t sd_zbc_zone_sectors(struct scsi_disk *sdkp)
/**
* sd_zbc_setup_reset_cmnd - Prepare a RESET WRITE POINTER scsi command.
* @cmd: the command to setup
+ * @all: flag to prepare a RESET ALL WRITE POINTER scsi command.
*
* Called from sd_init_command() for a REQ_OP_ZONE_RESET request.
*/
-blk_status_t sd_zbc_setup_reset_cmnd(struct scsi_cmnd *cmd)
+blk_status_t sd_zbc_setup_reset_cmnd(struct scsi_cmnd *cmd, bool all)
{
struct request *rq = cmd->request;
struct scsi_disk *sdkp = scsi_disk(rq->rq_disk);
@@ -234,7 +235,10 @@ blk_status_t sd_zbc_setup_reset_cmnd(struct scsi_cmnd *cmd)
memset(cmd->cmnd, 0, cmd->cmd_len);
cmd->cmnd[0] = ZBC_OUT;
cmd->cmnd[1] = ZO_RESET_WRITE_POINTER;
- put_unaligned_be64(block, &cmd->cmnd[2]);
+ if (all)
+ cmd->cmnd[14] = 0x1;
+ else
+ put_unaligned_be64(block, &cmd->cmnd[2]);
rq->timeout = SD_TIMEOUT;
cmd->sc_data_direction = DMA_NONE;
@@ -261,6 +265,7 @@ void sd_zbc_complete(struct scsi_cmnd *cmd, unsigned int good_bytes,
switch (req_op(rq)) {
case REQ_OP_ZONE_RESET:
+ case REQ_OP_ZONE_RESET_ALL:
if (result &&
sshdr->sense_key == ILLEGAL_REQUEST &&
--
2.17.0
