[PATCH 0/4] block: introduce REQ_OP_ZONE_RESET_ALL

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

In current implementation Zoned block device issues one bio at a time
based on the range of the offset and zones specified from userspace
tools like blkzone. Worst case scenario it will issue N requests which
are equal to the number of the zones when the application wants to
reset the drive, e.g. mkfs.

Zone Block devices allow issuing zone reset all operation [1] 
which can essentially reset all the available zones with only one
command.

This patch series introduces new REQ_OP_ZONE_RESET_ALL operation. Along
with that, we also introduce QUEUE_FLAG_ZONE_RESETALL (and respective
helpers) which is needed to be set by the low-level driver in order to
enable the REQ_OP_ZONE_RESET_ALL.

In this series we implement the REQ_OP_ZONE_RESET_ALL for sd and
null_blk block drivers.

Following is the performance difference measured for null_blk when
configured with 16TB size with zone size = 64MB for collecting
the overhead only for the Linux Block Layer. Please note that this
doesn't include any device overhead which will be additional on the
top of these numbers.

# modprobe null_blk zone_size=64 gb=16384 nr_devices=1 zoned=1
# for i in 1 2 3 4 5 ; do time blkzone reset /dev/nullb0 ; done 

------------------------------------------------------
| Time |  REQ_OP_ZONE_RESET | REQ_OP_ZONE_RESET_ALL |
------------------------------------------------------
| real |            0m4.622s|               0m0.014s|
| user |            0m0.000s|               0m0.000s|
| sys  |            0m2.762s|               0m0.011s|
|---------------------------------------------------|
| real |            0m4.565s|               0m0.013s|
| user |            0m0.000s|               0m0.000s|
| sys  |            0m2.729s|               0m0.010s|
|---------------------------------------------------|
| real |            0m4.536s|               0m0.013s|
| user |            0m0.001s|               0m0.000s|
| sys  |            0m2.703s|               0m0.011s|
|---------------------------------------------------|
| real |            0m4.619s|               0m0.013s|
| user |            0m0.001s|               0m0.002s|
| sys  |            0m2.759s|               0m0.009s|
|---------------------------------------------------|
| real |            0m4.529s|               0m0.012s|
| user |            0m0.002s|               0m0.000s|
| sys  |            0m2.696s|               0m0.010s|
------------------------------------------------------

In case anyone is interested please have a look at the test log.
We mainly test 4 scenarios:-

1. TCMU-Runner REQ_OP_ZONE_RESET :-

   Issue zone reset in reverse order and observe the zone report cmd 
   wptr. This scenario should translate into issuing N block layer
   REQ_OP_ZONE_RESET requests. On success Zone write pointer values
   should be set to 0x0 in the blkzone report command in the reverse
   order.
   (blkzone -o ${zone_start_offset} ${DEV})

2. TCMU-Runner REQ_OP_ZONE_RESET_ALL :-

   Issue zone reset with the length of the device, this should translate
   into the REQ_OP_ZONE_RESET_ALL and observe the zone report cmd wptr.
   (blkzone reset ${DEV})

3. Test for null_blk REQ_OP_ZONE_RESET :-

   Same as #1. 

4. Test for null_blk REQ_OP_ZONE_RESET_ALL :-

   Same as #2.

Chaitanya Kulkarni (4):
  block: add req op to reset all zones and flag
  blk-zoned: implement REQ_OP_ZONE_RESET_ALL
  scsi: implement REQ_OP_ZONE_RESET_ALL
  null_blk: implement REQ_OP_ZONE_RESET_ALL

 block/blk-core.c               |  5 +++++
 block/blk-zoned.c              | 40 ++++++++++++++++++++++++++++++++++
 drivers/block/null_blk_main.c  |  3 +++
 drivers/block/null_blk_zoned.c | 28 +++++++++++++++++++-----
 drivers/scsi/sd.c              |  7 +++++-
 drivers/scsi/sd.h              |  5 +++--
 drivers/scsi/sd_zbc.c          |  9 ++++++--
 include/linux/blk_types.h      |  2 ++
 include/linux/blkdev.h         |  3 +++
 9 files changed, 91 insertions(+), 11 deletions(-)


Following are the test results for the null_blk and tcmu-runner based
sd device :-

1. TCMU-Runner REQ_OP_ZONE_RESET:-

a. Populate the zones :-

# ./reset_all_test.sh /dev/sdd  
dd if=/dev/zero of=/dev/sdd bs=4096 count=1 seek=0
dd if=/dev/zero of=/dev/sdd bs=4096 count=2 seek=32768
dd if=/dev/zero of=/dev/sdd bs=4096 count=4 seek=65536
dd if=/dev/zero of=/dev/sdd bs=4096 count=8 seek=98304
dd if=/dev/zero of=/dev/sdd bs=4096 count=16 seek=131072
dd if=/dev/zero of=/dev/sdd bs=4096 count=32 seek=163840
dd if=/dev/zero of=/dev/sdd bs=4096 count=64 seek=196608
dd if=/dev/zero of=/dev/sdd bs=4096 count=128 seek=229376
  start: 0x000000000, len 0x040000, wptr 0x000008 reset:0 non-seq:0, zcond: 4(cl) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x000040000, len 0x040000, wptr 0x000010 reset:0 non-seq:0, zcond: 4(cl) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x000080000, len 0x040000, wptr 0x000020 reset:0 non-seq:0, zcond: 4(cl) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x0000c0000, len 0x040000, wptr 0x000040 reset:0 non-seq:0, zcond: 4(cl) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x000100000, len 0x040000, wptr 0x000080 reset:0 non-seq:0, zcond: 2(oi) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x000140000, len 0x040000, wptr 0x000100 reset:0 non-seq:0, zcond: 2(oi) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x000180000, len 0x040000, wptr 0x000200 reset:0 non-seq:0, zcond: 2(oi) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x0001c0000, len 0x040000, wptr 0x000400 reset:0 non-seq:0, zcond: 2(oi) [type: 2(SEQ_WRITE_REQUIRED)]

b. Now Issue zone reset (REQ_OP_ZONE_RESET) starting from the last zone to the
   0rth and report zones :-

Starting REQ_OP_ZONE_RESET test :- 
blkzone reset -o 1835008 /dev/sdd
  start: 0x000000000, len 0x040000, wptr 0x000008 reset:0 non-seq:0, zcond: 4(cl) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x000040000, len 0x040000, wptr 0x000010 reset:0 non-seq:0, zcond: 4(cl) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x000080000, len 0x040000, wptr 0x000020 reset:0 non-seq:0, zcond: 4(cl) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x0000c0000, len 0x040000, wptr 0x000040 reset:0 non-seq:0, zcond: 4(cl) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x000100000, len 0x040000, wptr 0x000080 reset:0 non-seq:0, zcond: 2(oi) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x000140000, len 0x040000, wptr 0x000100 reset:0 non-seq:0, zcond: 2(oi) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x000180000, len 0x040000, wptr 0x000200 reset:0 non-seq:0, zcond: 2(oi) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x0001c0000, len 0x040000, wptr 0x000000 reset:0 non-seq:0, zcond: 1(em) [type: 2(SEQ_WRITE_REQUIRED)]
ZONEID 7 :-  REQ_OP_ZONE_RESET : Pass
---------------------------------------------------------------
blkzone reset -o 1572864 /dev/sdd
  start: 0x000000000, len 0x040000, wptr 0x000008 reset:0 non-seq:0, zcond: 4(cl) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x000040000, len 0x040000, wptr 0x000010 reset:0 non-seq:0, zcond: 4(cl) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x000080000, len 0x040000, wptr 0x000020 reset:0 non-seq:0, zcond: 4(cl) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x0000c0000, len 0x040000, wptr 0x000040 reset:0 non-seq:0, zcond: 4(cl) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x000100000, len 0x040000, wptr 0x000080 reset:0 non-seq:0, zcond: 2(oi) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x000140000, len 0x040000, wptr 0x000100 reset:0 non-seq:0, zcond: 2(oi) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x000180000, len 0x040000, wptr 0x000000 reset:0 non-seq:0, zcond: 1(em) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x0001c0000, len 0x040000, wptr 0x000000 reset:0 non-seq:0, zcond: 1(em) [type: 2(SEQ_WRITE_REQUIRED)]
ZONEID 6 :-  REQ_OP_ZONE_RESET : Pass
---------------------------------------------------------------
blkzone reset -o 1310720 /dev/sdd
  start: 0x000000000, len 0x040000, wptr 0x000008 reset:0 non-seq:0, zcond: 4(cl) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x000040000, len 0x040000, wptr 0x000010 reset:0 non-seq:0, zcond: 4(cl) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x000080000, len 0x040000, wptr 0x000020 reset:0 non-seq:0, zcond: 4(cl) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x0000c0000, len 0x040000, wptr 0x000040 reset:0 non-seq:0, zcond: 4(cl) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x000100000, len 0x040000, wptr 0x000080 reset:0 non-seq:0, zcond: 2(oi) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x000140000, len 0x040000, wptr 0x000000 reset:0 non-seq:0, zcond: 1(em) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x000180000, len 0x040000, wptr 0x000000 reset:0 non-seq:0, zcond: 1(em) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x0001c0000, len 0x040000, wptr 0x000000 reset:0 non-seq:0, zcond: 1(em) [type: 2(SEQ_WRITE_REQUIRED)]
ZONEID 5 :-  REQ_OP_ZONE_RESET : Pass
---------------------------------------------------------------
blkzone reset -o 1048576 /dev/sdd
  start: 0x000000000, len 0x040000, wptr 0x000008 reset:0 non-seq:0, zcond: 4(cl) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x000040000, len 0x040000, wptr 0x000010 reset:0 non-seq:0, zcond: 4(cl) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x000080000, len 0x040000, wptr 0x000020 reset:0 non-seq:0, zcond: 4(cl) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x0000c0000, len 0x040000, wptr 0x000040 reset:0 non-seq:0, zcond: 4(cl) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x000100000, len 0x040000, wptr 0x000000 reset:0 non-seq:0, zcond: 1(em) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x000140000, len 0x040000, wptr 0x000000 reset:0 non-seq:0, zcond: 1(em) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x000180000, len 0x040000, wptr 0x000000 reset:0 non-seq:0, zcond: 1(em) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x0001c0000, len 0x040000, wptr 0x000000 reset:0 non-seq:0, zcond: 1(em) [type: 2(SEQ_WRITE_REQUIRED)]
ZONEID 4 :-  REQ_OP_ZONE_RESET : Pass
---------------------------------------------------------------
blkzone reset -o 786432 /dev/sdd
  start: 0x000000000, len 0x040000, wptr 0x000008 reset:0 non-seq:0, zcond: 4(cl) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x000040000, len 0x040000, wptr 0x000010 reset:0 non-seq:0, zcond: 4(cl) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x000080000, len 0x040000, wptr 0x000020 reset:0 non-seq:0, zcond: 4(cl) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x0000c0000, len 0x040000, wptr 0x000000 reset:0 non-seq:0, zcond: 1(em) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x000100000, len 0x040000, wptr 0x000000 reset:0 non-seq:0, zcond: 1(em) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x000140000, len 0x040000, wptr 0x000000 reset:0 non-seq:0, zcond: 1(em) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x000180000, len 0x040000, wptr 0x000000 reset:0 non-seq:0, zcond: 1(em) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x0001c0000, len 0x040000, wptr 0x000000 reset:0 non-seq:0, zcond: 1(em) [type: 2(SEQ_WRITE_REQUIRED)]
ZONEID 3 :-  REQ_OP_ZONE_RESET : Pass
---------------------------------------------------------------
blkzone reset -o 524288 /dev/sdd
  start: 0x000000000, len 0x040000, wptr 0x000008 reset:0 non-seq:0, zcond: 4(cl) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x000040000, len 0x040000, wptr 0x000010 reset:0 non-seq:0, zcond: 4(cl) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x000080000, len 0x040000, wptr 0x000000 reset:0 non-seq:0, zcond: 1(em) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x0000c0000, len 0x040000, wptr 0x000000 reset:0 non-seq:0, zcond: 1(em) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x000100000, len 0x040000, wptr 0x000000 reset:0 non-seq:0, zcond: 1(em) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x000140000, len 0x040000, wptr 0x000000 reset:0 non-seq:0, zcond: 1(em) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x000180000, len 0x040000, wptr 0x000000 reset:0 non-seq:0, zcond: 1(em) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x0001c0000, len 0x040000, wptr 0x000000 reset:0 non-seq:0, zcond: 1(em) [type: 2(SEQ_WRITE_REQUIRED)]
ZONEID 2 :-  REQ_OP_ZONE_RESET : Pass
---------------------------------------------------------------
blkzone reset -o 262144 /dev/sdd
  start: 0x000000000, len 0x040000, wptr 0x000008 reset:0 non-seq:0, zcond: 4(cl) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x000040000, len 0x040000, wptr 0x000000 reset:0 non-seq:0, zcond: 1(em) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x000080000, len 0x040000, wptr 0x000000 reset:0 non-seq:0, zcond: 1(em) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x0000c0000, len 0x040000, wptr 0x000000 reset:0 non-seq:0, zcond: 1(em) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x000100000, len 0x040000, wptr 0x000000 reset:0 non-seq:0, zcond: 1(em) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x000140000, len 0x040000, wptr 0x000000 reset:0 non-seq:0, zcond: 1(em) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x000180000, len 0x040000, wptr 0x000000 reset:0 non-seq:0, zcond: 1(em) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x0001c0000, len 0x040000, wptr 0x000000 reset:0 non-seq:0, zcond: 1(em) [type: 2(SEQ_WRITE_REQUIRED)]
ZONEID 1 :-  REQ_OP_ZONE_RESET : Pass
---------------------------------------------------------------
blkzone reset -o 0 /dev/sdd
  start: 0x000000000, len 0x040000, wptr 0x000000 reset:0 non-seq:0, zcond: 1(em) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x000040000, len 0x040000, wptr 0x000000 reset:0 non-seq:0, zcond: 1(em) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x000080000, len 0x040000, wptr 0x000000 reset:0 non-seq:0, zcond: 1(em) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x0000c0000, len 0x040000, wptr 0x000000 reset:0 non-seq:0, zcond: 1(em) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x000100000, len 0x040000, wptr 0x000000 reset:0 non-seq:0, zcond: 1(em) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x000140000, len 0x040000, wptr 0x000000 reset:0 non-seq:0, zcond: 1(em) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x000180000, len 0x040000, wptr 0x000000 reset:0 non-seq:0, zcond: 1(em) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x0001c0000, len 0x040000, wptr 0x000000 reset:0 non-seq:0, zcond: 1(em) [type: 2(SEQ_WRITE_REQUIRED)]
ZONEID 0 :-  REQ_OP_ZONE_RESET : Pass
---------------------------------------------------------------

2. TCMU-Runner REQ_OP_ZONE_RESET_ALL:-

a. Populate the zones :-

dd if=/dev/zero of=/dev/sdd bs=4096 count=1 seek=0
dd if=/dev/zero of=/dev/sdd bs=4096 count=2 seek=32768
dd if=/dev/zero of=/dev/sdd bs=4096 count=4 seek=65536
dd if=/dev/zero of=/dev/sdd bs=4096 count=8 seek=98304
dd if=/dev/zero of=/dev/sdd bs=4096 count=16 seek=131072
dd if=/dev/zero of=/dev/sdd bs=4096 count=32 seek=163840
dd if=/dev/zero of=/dev/sdd bs=4096 count=64 seek=196608
dd if=/dev/zero of=/dev/sdd bs=4096 count=128 seek=229376
  start: 0x000000000, len 0x040000, wptr 0x000008 reset:0 non-seq:0, zcond: 4(cl) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x000040000, len 0x040000, wptr 0x000010 reset:0 non-seq:0, zcond: 4(cl) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x000080000, len 0x040000, wptr 0x000020 reset:0 non-seq:0, zcond: 4(cl) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x0000c0000, len 0x040000, wptr 0x000040 reset:0 non-seq:0, zcond: 4(cl) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x000100000, len 0x040000, wptr 0x000080 reset:0 non-seq:0, zcond: 2(oi) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x000140000, len 0x040000, wptr 0x000100 reset:0 non-seq:0, zcond: 2(oi) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x000180000, len 0x040000, wptr 0x000200 reset:0 non-seq:0, zcond: 2(oi) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x0001c0000, len 0x040000, wptr 0x000400 reset:0 non-seq:0, zcond: 2(oi) [type: 2(SEQ_WRITE_REQUIRED)]
-------------------------------------------------

b. Issue REQ_OP_ZONE_RESET_ALL and report :-
blkzone reset /dev/sdd
  start: 0x000000000, len 0x040000, wptr 0x000000 reset:0 non-seq:0, zcond: 1(em) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x000040000, len 0x040000, wptr 0x000000 reset:0 non-seq:0, zcond: 1(em) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x000080000, len 0x040000, wptr 0x000000 reset:0 non-seq:0, zcond: 1(em) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x0000c0000, len 0x040000, wptr 0x000000 reset:0 non-seq:0, zcond: 1(em) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x000100000, len 0x040000, wptr 0x000000 reset:0 non-seq:0, zcond: 1(em) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x000140000, len 0x040000, wptr 0x000000 reset:0 non-seq:0, zcond: 1(em) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x000180000, len 0x040000, wptr 0x000000 reset:0 non-seq:0, zcond: 1(em) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x0001c0000, len 0x040000, wptr 0x000000 reset:0 non-seq:0, zcond: 1(em) [type: 2(SEQ_WRITE_REQUIRED)]
REQ_OP_ZONE_RESET_ALL : Pass
# 


3. Test for null_blk (REQ_OP_ZONE_RESET) :-

a. Load the null_blk and populate the zones :-
# modprobe null_blk zoned=1 zone_size=128 gb=1 bs=4096
# ./reset_all_test.sh /dev/nullb0
dd if=/dev/zero of=/dev/nullb0 bs=4096 count=1 seek=0
dd if=/dev/zero of=/dev/nullb0 bs=4096 count=2 seek=32768
dd if=/dev/zero of=/dev/nullb0 bs=4096 count=4 seek=65536
dd if=/dev/zero of=/dev/nullb0 bs=4096 count=8 seek=98304
dd if=/dev/zero of=/dev/nullb0 bs=4096 count=16 seek=131072
dd if=/dev/zero of=/dev/nullb0 bs=4096 count=32 seek=163840
dd if=/dev/zero of=/dev/nullb0 bs=4096 count=64 seek=196608
dd if=/dev/zero of=/dev/nullb0 bs=4096 count=128 seek=229376
  start: 0x000000000, len 0x040000, wptr 0x000008 reset:0 non-seq:0, zcond: 2(oi) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x000040000, len 0x040000, wptr 0x000010 reset:0 non-seq:0, zcond: 2(oi) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x000080000, len 0x040000, wptr 0x000020 reset:0 non-seq:0, zcond: 2(oi) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x0000c0000, len 0x040000, wptr 0x000040 reset:0 non-seq:0, zcond: 2(oi) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x000100000, len 0x040000, wptr 0x000080 reset:0 non-seq:0, zcond: 2(oi) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x000140000, len 0x040000, wptr 0x000100 reset:0 non-seq:0, zcond: 2(oi) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x000180000, len 0x040000, wptr 0x000200 reset:0 non-seq:0, zcond: 2(oi) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x0001c0000, len 0x040000, wptr 0x000400 reset:0 non-seq:0, zcond: 2(oi) [type: 2(SEQ_WRITE_REQUIRED)]

b. Now Issue zone reset (REQ_OP_ZONE_RESET) starting from the last zone to the
   0rth and report zones :-

Starting REQ_OP_ZONE_RESET test :- 
blkzone reset -o 1835008 /dev/nullb0
  start: 0x000000000, len 0x040000, wptr 0x000008 reset:0 non-seq:0, zcond: 2(oi) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x000040000, len 0x040000, wptr 0x000010 reset:0 non-seq:0, zcond: 2(oi) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x000080000, len 0x040000, wptr 0x000020 reset:0 non-seq:0, zcond: 2(oi) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x0000c0000, len 0x040000, wptr 0x000040 reset:0 non-seq:0, zcond: 2(oi) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x000100000, len 0x040000, wptr 0x000080 reset:0 non-seq:0, zcond: 2(oi) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x000140000, len 0x040000, wptr 0x000100 reset:0 non-seq:0, zcond: 2(oi) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x000180000, len 0x040000, wptr 0x000200 reset:0 non-seq:0, zcond: 2(oi) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x0001c0000, len 0x040000, wptr 0x000000 reset:0 non-seq:0, zcond: 1(em) [type: 2(SEQ_WRITE_REQUIRED)]
ZONEID 7 :- ---------------------------------------------------------------
blkzone reset -o 1572864 /dev/nullb0
  start: 0x000000000, len 0x040000, wptr 0x000008 reset:0 non-seq:0, zcond: 2(oi) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x000040000, len 0x040000, wptr 0x000010 reset:0 non-seq:0, zcond: 2(oi) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x000080000, len 0x040000, wptr 0x000020 reset:0 non-seq:0, zcond: 2(oi) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x0000c0000, len 0x040000, wptr 0x000040 reset:0 non-seq:0, zcond: 2(oi) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x000100000, len 0x040000, wptr 0x000080 reset:0 non-seq:0, zcond: 2(oi) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x000140000, len 0x040000, wptr 0x000100 reset:0 non-seq:0, zcond: 2(oi) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x000180000, len 0x040000, wptr 0x000000 reset:0 non-seq:0, zcond: 1(em) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x0001c0000, len 0x040000, wptr 0x000000 reset:0 non-seq:0, zcond: 1(em) [type: 2(SEQ_WRITE_REQUIRED)]
ZONEID 6 :- ---------------------------------------------------------------
blkzone reset -o 1310720 /dev/nullb0
  start: 0x000000000, len 0x040000, wptr 0x000008 reset:0 non-seq:0, zcond: 2(oi) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x000040000, len 0x040000, wptr 0x000010 reset:0 non-seq:0, zcond: 2(oi) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x000080000, len 0x040000, wptr 0x000020 reset:0 non-seq:0, zcond: 2(oi) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x0000c0000, len 0x040000, wptr 0x000040 reset:0 non-seq:0, zcond: 2(oi) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x000100000, len 0x040000, wptr 0x000080 reset:0 non-seq:0, zcond: 2(oi) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x000140000, len 0x040000, wptr 0x000000 reset:0 non-seq:0, zcond: 1(em) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x000180000, len 0x040000, wptr 0x000000 reset:0 non-seq:0, zcond: 1(em) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x0001c0000, len 0x040000, wptr 0x000000 reset:0 non-seq:0, zcond: 1(em) [type: 2(SEQ_WRITE_REQUIRED)]
ZONEID 5 :- ---------------------------------------------------------------
blkzone reset -o 1048576 /dev/nullb0
  start: 0x000000000, len 0x040000, wptr 0x000008 reset:0 non-seq:0, zcond: 2(oi) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x000040000, len 0x040000, wptr 0x000010 reset:0 non-seq:0, zcond: 2(oi) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x000080000, len 0x040000, wptr 0x000020 reset:0 non-seq:0, zcond: 2(oi) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x0000c0000, len 0x040000, wptr 0x000040 reset:0 non-seq:0, zcond: 2(oi) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x000100000, len 0x040000, wptr 0x000000 reset:0 non-seq:0, zcond: 1(em) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x000140000, len 0x040000, wptr 0x000000 reset:0 non-seq:0, zcond: 1(em) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x000180000, len 0x040000, wptr 0x000000 reset:0 non-seq:0, zcond: 1(em) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x0001c0000, len 0x040000, wptr 0x000000 reset:0 non-seq:0, zcond: 1(em) [type: 2(SEQ_WRITE_REQUIRED)]
ZONEID 4 :- ---------------------------------------------------------------
blkzone reset -o 786432 /dev/nullb0
  start: 0x000000000, len 0x040000, wptr 0x000008 reset:0 non-seq:0, zcond: 2(oi) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x000040000, len 0x040000, wptr 0x000010 reset:0 non-seq:0, zcond: 2(oi) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x000080000, len 0x040000, wptr 0x000020 reset:0 non-seq:0, zcond: 2(oi) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x0000c0000, len 0x040000, wptr 0x000000 reset:0 non-seq:0, zcond: 1(em) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x000100000, len 0x040000, wptr 0x000000 reset:0 non-seq:0, zcond: 1(em) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x000140000, len 0x040000, wptr 0x000000 reset:0 non-seq:0, zcond: 1(em) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x000180000, len 0x040000, wptr 0x000000 reset:0 non-seq:0, zcond: 1(em) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x0001c0000, len 0x040000, wptr 0x000000 reset:0 non-seq:0, zcond: 1(em) [type: 2(SEQ_WRITE_REQUIRED)]
ZONEID 3 :- ---------------------------------------------------------------
blkzone reset -o 524288 /dev/nullb0
  start: 0x000000000, len 0x040000, wptr 0x000008 reset:0 non-seq:0, zcond: 2(oi) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x000040000, len 0x040000, wptr 0x000010 reset:0 non-seq:0, zcond: 2(oi) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x000080000, len 0x040000, wptr 0x000000 reset:0 non-seq:0, zcond: 1(em) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x0000c0000, len 0x040000, wptr 0x000000 reset:0 non-seq:0, zcond: 1(em) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x000100000, len 0x040000, wptr 0x000000 reset:0 non-seq:0, zcond: 1(em) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x000140000, len 0x040000, wptr 0x000000 reset:0 non-seq:0, zcond: 1(em) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x000180000, len 0x040000, wptr 0x000000 reset:0 non-seq:0, zcond: 1(em) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x0001c0000, len 0x040000, wptr 0x000000 reset:0 non-seq:0, zcond: 1(em) [type: 2(SEQ_WRITE_REQUIRED)]
ZONEID 2 :- ---------------------------------------------------------------
blkzone reset -o 262144 /dev/nullb0
  start: 0x000000000, len 0x040000, wptr 0x000008 reset:0 non-seq:0, zcond: 2(oi) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x000040000, len 0x040000, wptr 0x000000 reset:0 non-seq:0, zcond: 1(em) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x000080000, len 0x040000, wptr 0x000000 reset:0 non-seq:0, zcond: 1(em) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x0000c0000, len 0x040000, wptr 0x000000 reset:0 non-seq:0, zcond: 1(em) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x000100000, len 0x040000, wptr 0x000000 reset:0 non-seq:0, zcond: 1(em) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x000140000, len 0x040000, wptr 0x000000 reset:0 non-seq:0, zcond: 1(em) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x000180000, len 0x040000, wptr 0x000000 reset:0 non-seq:0, zcond: 1(em) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x0001c0000, len 0x040000, wptr 0x000000 reset:0 non-seq:0, zcond: 1(em) [type: 2(SEQ_WRITE_REQUIRED)]
ZONEID 1 :- ---------------------------------------------------------------
blkzone reset -o 0 /dev/nullb0
  start: 0x000000000, len 0x040000, wptr 0x000000 reset:0 non-seq:0, zcond: 1(em) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x000040000, len 0x040000, wptr 0x000000 reset:0 non-seq:0, zcond: 1(em) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x000080000, len 0x040000, wptr 0x000000 reset:0 non-seq:0, zcond: 1(em) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x0000c0000, len 0x040000, wptr 0x000000 reset:0 non-seq:0, zcond: 1(em) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x000100000, len 0x040000, wptr 0x000000 reset:0 non-seq:0, zcond: 1(em) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x000140000, len 0x040000, wptr 0x000000 reset:0 non-seq:0, zcond: 1(em) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x000180000, len 0x040000, wptr 0x000000 reset:0 non-seq:0, zcond: 1(em) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x0001c0000, len 0x040000, wptr 0x000000 reset:0 non-seq:0, zcond: 1(em) [type: 2(SEQ_WRITE_REQUIRED)]
ZONEID 0 :- ---------------------------------------------------------------

4. Test for null_blk (REQ_OP_ZONE_RESET_ALL) :-

a. Populate the zones :-
dd if=/dev/zero of=/dev/nullb0 bs=4096 count=1 seek=0
dd if=/dev/zero of=/dev/nullb0 bs=4096 count=2 seek=32768
dd if=/dev/zero of=/dev/nullb0 bs=4096 count=4 seek=65536
dd if=/dev/zero of=/dev/nullb0 bs=4096 count=8 seek=98304
dd if=/dev/zero of=/dev/nullb0 bs=4096 count=16 seek=131072
dd if=/dev/zero of=/dev/nullb0 bs=4096 count=32 seek=163840
dd if=/dev/zero of=/dev/nullb0 bs=4096 count=64 seek=196608
dd if=/dev/zero of=/dev/nullb0 bs=4096 count=128 seek=229376
  start: 0x000000000, len 0x040000, wptr 0x000008 reset:0 non-seq:0, zcond: 2(oi) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x000040000, len 0x040000, wptr 0x000010 reset:0 non-seq:0, zcond: 2(oi) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x000080000, len 0x040000, wptr 0x000020 reset:0 non-seq:0, zcond: 2(oi) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x0000c0000, len 0x040000, wptr 0x000040 reset:0 non-seq:0, zcond: 2(oi) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x000100000, len 0x040000, wptr 0x000080 reset:0 non-seq:0, zcond: 2(oi) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x000140000, len 0x040000, wptr 0x000100 reset:0 non-seq:0, zcond: 2(oi) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x000180000, len 0x040000, wptr 0x000200 reset:0 non-seq:0, zcond: 2(oi) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x0001c0000, len 0x040000, wptr 0x000400 reset:0 non-seq:0, zcond: 2(oi) [type: 2(SEQ_WRITE_REQUIRED)]
-------------------------------------------------
b. Issue REQ_OP_ZONE_RESET_ALL and report :-
blkzone reset /dev/sdd
  start: 0x000000000, len 0x040000, wptr 0x000000 reset:0 non-seq:0, zcond: 1(em) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x000040000, len 0x040000, wptr 0x000000 reset:0 non-seq:0, zcond: 1(em) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x000080000, len 0x040000, wptr 0x000000 reset:0 non-seq:0, zcond: 1(em) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x0000c0000, len 0x040000, wptr 0x000000 reset:0 non-seq:0, zcond: 1(em) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x000100000, len 0x040000, wptr 0x000000 reset:0 non-seq:0, zcond: 1(em) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x000140000, len 0x040000, wptr 0x000000 reset:0 non-seq:0, zcond: 1(em) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x000180000, len 0x040000, wptr 0x000000 reset:0 non-seq:0, zcond: 1(em) [type: 2(SEQ_WRITE_REQUIRED)]
  start: 0x0001c0000, len 0x040000, wptr 0x000000 reset:0 non-seq:0, zcond: 1(em) [type: 2(SEQ_WRITE_REQUIRED)]
# 
-- 
2.17.0




[Index of Archives]     [Linux RAID]     [Linux SCSI]     [Linux ATA RAID]     [IDE]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Device Mapper]

  Powered by Linux