On 27/08/2012 21:18, Joseph Glanville wrote:
On 28 August 2012 06:15, Jonathan Tripathy <jonnyt@xxxxxxxxxxx> wrote:
On 27/08/2012 21:07, Jonathan Tripathy wrote:
On 27/08/2012 21:00, Jonathan Tripathy wrote:
2) The windows setup didn't complain that it couldn't install on the LV,
but once I clicked 'next', the Dom0 crashed and the server rebooted. A lot
of output was displayed on screen but quickly vanished as the system
rebooted. I'm trying to see if the output was saved anywhere. Any ideas why
this could of happened and/or where the output might be saved?
I'd also like to add that after the server came back up, the md raid
array started rebuilding. I wondering if that's just a coincidence (due to
the forced reboot), or a sign of something wrong with the md integration
with bcache?
I'm going to see if Windows installs natively on the md array (it's RAID
10 btw) and post back here.
Ok, so trying to install Windows directly onto the spindles causes the
same thing to happen. I'm going to try and boot up into the non-bcache
kernel (The default ubuntu one) and see if it works there. If it fails
there, then this is clearly a xen and/or mdraid issue...
Thanks
Ok, so booting into the default Ubuntu kernel, the windows installation
seems to progress just fine.
Does this mean there is something wrong with the mdraid code in the bcache
kernel?
Actually, I'm not telling the whole story. The kernel I'm using is the
bcache-3.2 tree (from evilpriate.org) with changes merged in from
kernel.org's 3.2.27 tree. There were no merge conflicts when I did the git
merge.
What do you think I should do?
Thanks
--
To unsubscribe from this list: send the line "unsubscribe linux-bcache" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
I would recommend booting with the raw bcache-3.2 branch before
applying the stable patches (even though they should be fine) and
trying to catch the panic.
This is easiest done with a serial port and setting it to the kernel
console on the kernel command line in grub.
Joseph.
Thanks Joseph.
I'll do a clean build of the raw bcache-3.2 tree and try my windows
install again. I'll also try and find a serial cable with the correct
genders..
Will keep you updated
Thanks
--
To unsubscribe from this list: send the line "unsubscribe linux-bcache" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
