I tried another slot (there are only 2 pci slots on the mother board), but the same thing happens. It required about 3 boots to get the firmware to load. I hope it's not a problem in the RME PCI card itself. I was hoping it was a problem in the software...I'm still hoping it is! Perhaps I'll need to contact an RME forum. Cheers, Iain Em Ter, 2014-10-14 às 15:45 +0200, raf escreveu: > hello, > > the "bad" trace does not have any mention of the rme card being detected. > you could try to put it in another PCI slot if this is a pci card you are using. > > Raphaël > > > Le 14 oct. 2014 à 11:34, Iain Mott <mott@xxxxxxxxxxxxxxx> a écrit : > > > Hi List, > > > > My system (with ubuntu 14.04) is loading the hdsp firmware for an RME > > Multiface only 50% of the time on start up. It's like flipping a coin. > > > > I've not been able to figure out how to fix it. > > > > I've saved the dmesg printout from a successful boot (good) and an > > unsuccessful (bad) here: > > > > http://reverberant.com/tmp/dmesg_good.txt > > > > http://reverberant.com/tmp/dmesg_bad.txt > > > > and the keyword to search for is "hammerfall". > > > > I was having trouble with the NVidia driver some time back and perhaps > > there's a conflict there but I don't know. > > > > If anyone can help - please do! > > > > Cheers, > > > > Iain > > > > _______________________________________________ > > Linux-audio-user mailing list > > Linux-audio-user@xxxxxxxxxxxxxxxxxxxx > > http://lists.linuxaudio.org/listinfo/linux-audio-user > > _______________________________________________ > Linux-audio-user mailing list > Linux-audio-user@xxxxxxxxxxxxxxxxxxxx > http://lists.linuxaudio.org/listinfo/linux-audio-user _______________________________________________ Linux-audio-user mailing list Linux-audio-user@xxxxxxxxxxxxxxxxxxxx http://lists.linuxaudio.org/listinfo/linux-audio-user
