david wrote: > cal wrote: >> david wrote: >>> [ ... ] >>>>> @audio hard rtprio 50 >>>>> @audio soft rtprio 30 >>>> These are rather low. I just looked, and yoshi tries for 55, so these settings >>>> would fail. You could either bump those settings higher, or adjust the value >>>> in MusicIO.cpp line 214 down to your level and see if that helps. >>> I'll boost mine up to go with toshi. It was a copy/paste from someone >>> else's recommendation. >> I still get the feeling you're inclined to set them lower than what's >> consider normal or recommended. The Jack FAQ spells it out pretty >> simply - <http://www.jackaudio.org/faq>. > > Thanks. I changed the hard one to 99. The JACK FAQ didn't say anything > about the difference between "hard" and "soft", so I set the "soft" one > to 55. Can't test it right now, will test it later! > Almost, but not quite. Somewhere in limits.conf it describes (perhaps cryptically) how you can set hard and soft at the same time (on the same line) using the '-'. I don't know of any reason to have hard and soft set different, so as per the jack faq is about as good as you can get. cheers. _______________________________________________ Linux-audio-user mailing list Linux-audio-user@xxxxxxxxxxxxxxxxxxxx http://lists.linuxaudio.org/listinfo/linux-audio-user
