On Wed, 2010-01-20 at 07:34 -0500, Joe Dell'Orfano wrote: > Hi all, > > I am testing fedora 12 on my 64-bit system using Planet CCRMA > repositories. Everything boots and runs (even RT kernel) except my > multiface II. On Fedora 8, the Multiface generally initialized at the > udev phase of bootup. I say "generally" because at times it doesn't > initialize, requiring several power off cycles. Interestingly, once the > firmware is loaded by FC8, if I then boot into FC12 (I have it set up as > a dual boot system in order to maintain my working production system), > hdspmixer crashes (although hdspconfig works). It seems that the FC8 > firmware remains loaded (perhaps an older version of the alsa firmware). > When I am in FC12, hdsploader fails with a "device busy" error. > > The multiface II is running off of PCIe on IRQ17, which is apparently > shared with my Radeon card, also in PCIe port. I cannot reassign this > IRQ in BIOS, and I haven't been able to plug into another PCIe port. > > Any help? Is there some FC12 udev magic I must do? What happens if you remove the snd_hdsp kernel module and load it again? /sbin/rmmod snd_hdsp /sbin/modprobe snd_hdsp I presume you do have alsa-tools-firmware installed, right? -- Fernando _______________________________________________ Linux-audio-user mailing list Linux-audio-user@xxxxxxxxxxxxxxxxxxxx http://lists.linuxaudio.org/listinfo/linux-audio-user
