--- Paul Davis <paul@xxxxxxxxxxxxxxxxxxxxx> wrote: [...] > > The "input channels: 0" and "output channels: 0" > > seem suspicious. If I try to change them Jack > > won't start and says: "ALSA: cannot set channel > > count to 1 for capture" If I leave them zero, jack > > will start (but I don't know if that's right.) > > its correct. qjackctl could do a better job of presenting the idea that > "zero = use however many channels the hardware offers". Ah, I see. Thanks for the explanation. > > > Then in qjackctl, I can see ecasound in the "capture" column, > > and I routed it to every single output (all 18 of them -- > > presumably 2 s/pdif outs + 16 ADAT outs.) So I am seeing > > the hammerfall having 18 ports, which is encouraging > > please jack_lsp -c and post the results here, that way we can see > precisely what connections you have set up. Ok, I'll do that when I get home tonight. I noticed ecasound doesn't show up in qjackctl's connection window until I start it playing... then, after it's playing, I can set up connections. Wonder if there's a way to set up those connections before I start the playing? > > > I got nothing on the AW4416 where I would expect the sound > > from the wav file to show up on all 8 ADAT inputs. > > and where do you expect them to show up? On the pre-fader mixer input channel meters in the AW4416. Likely you don't really care too much about the esoteric workings of the AW4416, but in case you do, there is a pdf here which is not too bad. http://www.yamaha-europe.com/yamaha_europe/download/products/20_proaudio/multitrack_recorders/professional_audio_workstation/AW4416/aw4416_blockdiagramm.pdf ugh, big url... http://tinyurl.com/px3ot (well, the block diagram at the end cuts off the left hand side, which is unfortunate, as this is where the input meters are shown.) Anyway, on page 3 of that pdf, where it says "If you select F1 [1-24/RTN] you can see the meter array for all 24 possible inputs..." That is the screen I'm looking at. I have the 8 inputs of the Yamaha ADAT interface assigned to mixer channels 17-24, so expect to see something on the meters for those channels when I get all this working. -- steve __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com