After removing my Multiface II and switching back to my nVidia onboard audio, qjackctl will not run at 44100. I can set it in the setup window and it reports starting 44100 in the messages: 11:07:46.232 Patchbay deactivated. 11:07:46.322 Statistics reset. 11:07:46.498 MIDI connection graph change. 11:07:46.528 MIDI connection change. 11:07:47.580 Startup script... 11:07:47.580 artsshell -q terminate 11:07:47.861 Startup script terminated with exit status=256. 11:07:47.861 JACK is starting... 11:07:47.862 jackd -R -dalsa -dhw:1,0 -r44100 -p512 -n2 -S 11:07:47.870 JACK was started with PID=3071 (0xbff). jackd 0.101.0 Copyright 2001-2005 Paul Davis and others. jackd comes with ABSOLUTELY NO WARRANTY This is free software, and you are welcome to redistribute it under certain conditions; see the file COPYING for details JACK compiled with System V SHM support. loading driver .. Enhanced3DNow! detected SSE2 detected apparent rate = 44100 creating alsa driver ... hw:1,0|hw:1,0|512|2|44100|0|0|nomon|swmeter|-|16bit control device hw:1 configuring for 44100Hz, period = 512 frames, buffer = 2 periods nperiods = 2 for capture nperiods = 2 for playback 11:07:49.953 Server configuration saved to "/home/bozone/.jackdrc". 11:07:49.954 Statistics reset. 11:07:49.979 Client activated. 11:07:49.980 Audio connection change. 11:07:49.981 Audio connection graph change. Enhanced3DNow! detected SSE2 detected 11:10:21.095 MIDI connection graph change. 11:10:21.123 Audio connection graph change. 11:10:26.482 Audio connection graph change. 11:10:26.504 MIDI connection graph change. But then both qjackctl and Ardour report 48000 as the samplerate. All help is appreciated. Link -- e-mail is . . .
