Am Donnerstag, den 07.06.2018, 19:36 +0200 schrieb Ralf Mardorf: > You could use command line without a tool. > > Set the governor to performance by running > > echo performance | sudo tee > /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor > > Check the status by running > > cat /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor > > Disable performance mode by either running > > echo powersave | sudo tee > /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor > > when on an Intel CPU or by running > > echo ondemand | sudo tee > /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor > > if your CPU should be an AMD. That's the old way you did it, but you can't do that with debian and ubuntu, nowadays. I used "cpufreq-set" but it comes a bit unhandy 'cause you must use one order for every cpu. I have 4. Greets! Mitsch _______________________________________________ Linux-audio-user mailing list Linux-audio-user@xxxxxxxxxxxxxxxxxxxx https://lists.linuxaudio.org/listinfo/linux-audio-user
