|
Have you tried taking a look at the files under /proc/asound?
There, I have the files: hw_params, info, status, sw_params and xrun_injection.
The file I check is hw_params. It will show whether the card has been opened for recording (or playback), the rate in khz, if it's mono or stereo, etc. If the card is not recording (or playing back), it will show 'closed'.
I believe the structure of that directory changes depending on the card. For my card, the directory card1/pcm0c is for the recording interface, and pcm0p is for the playback interface, so you will need to figure out where to look.
Maybe you can check those files and see if there's something you can figure out from there.
Martín.
De: Linux-audio-user <linux-audio-user-bounces@xxxxxxxxxxxxxxxxxxxx> en nombre de HernanLG <hernanlabbeg@xxxxxxxxxxxxx>
Enviado: miércoles, 25 de abril de 2018 08:32 a.m. Para: linux-audio-user@xxxxxxxxxxxxxxxxxxxx Asunto: Re: Help getting sound from Cakewalk UA-25 EX to Ardour Jeremy Jongepier wrote
> > Does the interface work with another computer or OS? Which input are you > using? Instruments should go into input 2 and if it's a stringed > instrument with a pickup and no preamp the Hi-Z button should be > activated. What kind of instrument are you using it with? Could you test > with something else like a microphone? Yes, the interface worked in the computer of the person I got it from. I am connecting an electric bass guitar to the input2/R with Hi-Z pushed. Sensitivity knobs are set to middle, volume to high. Neither the mono nor the Mon SW buttons are pressed. The input know is set to a little over the middle. As I said before, I know the interface gets sounds because if I turn the sensitivity on a lot, I can see the peak light lighting up when playing the instrument. I tested with a mic but the same. NO sound is shown on the computer. Jeremy Jongepier wrote > It sounds more like a setting on the interface itself. The settings at the back are: Sample Rate: 44.1 Advanced mode: off Phantom: Off Comp/Limit type: Bypass Ground Lift: nor and the usb input has the cable that connects it to the computer. Any suggestion to figure why I can't record sound are very appreciated. Thanks in advance. -- Sent from: http://linux-audio.4202.n7.nabble.com/linux-audio-user-f5.html
_______________________________________________ Linux-audio-user mailing list Linux-audio-user@xxxxxxxxxxxxxxxxxxxx https://lists.linuxaudio.org/listinfo/linux-audio-user | ||
_______________________________________________ Linux-audio-user mailing list Linux-audio-user@xxxxxxxxxxxxxxxxxxxx https://lists.linuxaudio.org/listinfo/linux-audio-user
