Jeremy Jongepier wrote > > Does the interface work with another computer or OS? Which input are you > using? Instruments should go into input 2 and if it's a stringed > instrument with a pickup and no preamp the Hi-Z button should be > activated. What kind of instrument are you using it with? Could you test > with something else like a microphone? Yes, the interface worked in the computer of the person I got it from. I am connecting an electric bass guitar to the input2/R with Hi-Z pushed. Sensitivity knobs are set to middle, volume to high. Neither the mono nor the Mon SW buttons are pressed. The input know is set to a little over the middle. As I said before, I know the interface gets sounds because if I turn the sensitivity on a lot, I can see the peak light lighting up when playing the instrument. I tested with a mic but the same. NO sound is shown on the computer. Jeremy Jongepier wrote > It sounds more like a setting on the interface itself. The settings at the back are: Sample Rate: 44.1 Advanced mode: off Phantom: Off Comp/Limit type: Bypass Ground Lift: nor and the usb input has the cable that connects it to the computer. Any suggestion to figure why I can't record sound are very appreciated. Thanks in advance. -- Sent from: http://linux-audio.4202.n7.nabble.com/linux-audio-user-f5.html _______________________________________________ Linux-audio-user mailing list Linux-audio-user@xxxxxxxxxxxxxxxxxxxx https://lists.linuxaudio.org/listinfo/linux-audio-user
