On Thu, 24 Mar 2016 08:06:30 -0700 (PDT) Len Ovens <len@xxxxxxxxxxxxx> wrote: > Looking at the 1010LT manual, I see that the jumpers are only for the > two XLR connectors to set them Mic (-50ish) or line (+4). The manual > then say that the i/o level can be set in the control panel > (windows/OSx) to line, consumer or -10... that is +4, -4 or -10. I > see that mudita24 does not have these settings and so would assume > 0db = +4db out... which is definately too much for anything that > likes to connect to the RCA jacks the LT comes with. You should > probably be running your DAC levels at -12 or -14 if you are using > -10 amplification for monitoring. Thanks for the comment. This aspect is very interesting. The only Pro/Consumer settings are seemingly for S/PDIF configuration. The monitor setting in Ardour is at 0.0dB. This way I figured what is heard is what the master bus fader is at, and not adding any other amplitude modification. Since it is likely that the DAC is set at +4dB, wouldn't this mean that a 1010LT fader compensation of -4dB would be sufficient to bring the default out at 0dB ? _______________________________________________ Linux-audio-user mailing list Linux-audio-user@xxxxxxxxxxxxxxxxxxxx http://lists.linuxaudio.org/listinfo/linux-audio-user