On Thu, 24 Mar 2016, jonetsu@xxxxxxxxxxxx wrote:
I see. I will experiment further. The sound card DAC levels are at 0dB. Set by the mudita24 utility for the 1010LT card. One thing you mentioned is to lower down the volume after an export with normalization, whereas I expected to be the same as what I have mixed.
Looking at the 1010LT manual, I see that the jumpers are only for the two XLR connectors to set them Mic (-50ish) or line (+4). The manual then say that the i/o level can be set in the control panel (windows/OSx) to line, consumer or -10... that is +4, -4 or -10. I see that mudita24 does not have these settings and so would assume 0db = +4db out... which is definately too much for anything that likes to connect to the RCA jacks the LT comes with. You should probably be running your DAC levels at -12 or -14 if you are using -10 amplification for monitoring.
-- Len Ovens www.ovenwerks.net _______________________________________________ Linux-audio-user mailing list Linux-audio-user@xxxxxxxxxxxxxxxxxxxx http://lists.linuxaudio.org/listinfo/linux-audio-user
