Hi Bjorn,
This series updates the SDX55 devicetree by adding below features:
- A7 PLL
- APCS mailbox
- CPUFreq using clk and regulator
- SMP2P
- IMEM, PIL
- SCM
- Interconnect
- Telit FN980 TLB board
- Thundercomm T55 dev board
- Modem remoteproc
Except remoteproc, all of the driver patches already merged. Remoteproc
patch will be submitted separately.
Thanks,
Mani
Manivannan Sadhasivam (15):
ARM: dts: qcom: sdx55: Add support for A7 PLL clock
ARM: dts: qcom: sdx55: Add support for APCS block
ARM: dts: qcom: sdx55: Add CPUFreq support
ARM: dts: qcom: sdx55: Add modem SMP2P node
ARM: dts: qcom: sdx55: Add IMEM and PIL info region
dt-bindings: firmware: scm: Add compatible for SDX55
ARM: dts: qcom: sdx55: Add SCM node
ARM: dts: qcom: sdx55: Add interconnect nodes
ARM: dts: qcom: Fix node name for NAND controller node
dt-bindings: arm: qcom: Add binding for Telit FN980 TLB board
ARM: dts: qcom: sdx55: Add basic devicetree support for Telit FN980
TLB
dt-bindings: arm: qcom: Add binding for Thundercomm T55 kit
ARM: dts: qcom: sdx55: Add basic devicetree support for Thundercomm
T55
dt-bindings: remoteproc: qcom: pas: Add binding for SDX55
ARM: dts: qcom: sdx55: Add Modem remoteproc node
.../devicetree/bindings/arm/qcom.yaml | 2 +
.../devicetree/bindings/firmware/qcom,scm.txt | 1 +
.../bindings/remoteproc/qcom,adsp.txt | 4 +
arch/arm/boot/dts/Makefile | 4 +-
arch/arm/boot/dts/qcom-ipq4019.dtsi | 2 +-
arch/arm/boot/dts/qcom-sdx55-t55.dts | 281 +++++++++++++++++
.../boot/dts/qcom-sdx55-telit-fn980-tlb.dts | 282 ++++++++++++++++++
arch/arm/boot/dts/qcom-sdx55.dtsi | 166 ++++++++++-
8 files changed, 739 insertions(+), 3 deletions(-)
create mode 100644 arch/arm/boot/dts/qcom-sdx55-t55.dts
create mode 100644 arch/arm/boot/dts/qcom-sdx55-telit-fn980-tlb.dts
--
2.25.1
