Use the common "nand-controller" node name for NAND controller node to
fix the `make dtbs_check` validation for Qcom platforms.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
---
arch/arm/boot/dts/qcom-ipq4019.dtsi | 2 +-
arch/arm/boot/dts/qcom-sdx55.dtsi | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi
index 7bf1da916f25..ff1bdb10ad19 100644
--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
@@ -480,7 +480,7 @@ qpic_bam: dma@7984000 {
status = "disabled";
};
- nand: qpic-nand@79b0000 {
+ nand: nand-controller@79b0000 {
compatible = "qcom,ipq4019-nand";
reg = <0x79b0000 0x1000>;
#address-cells = <1>;
diff --git a/arch/arm/boot/dts/qcom-sdx55.dtsi b/arch/arm/boot/dts/qcom-sdx55.dtsi
index 3372e076f9bd..aa3edecf5810 100644
--- a/arch/arm/boot/dts/qcom-sdx55.dtsi
+++ b/arch/arm/boot/dts/qcom-sdx55.dtsi
@@ -294,7 +294,7 @@ qpic_bam: dma-controller@1b04000 {
status = "disabled";
};
- qpic_nand: nand@1b30000 {
+ qpic_nand: nand-controller@1b30000 {
compatible = "qcom,sdx55-nand";
reg = <0x01b30000 0x10000>;
#address-cells = <1>;
--
2.25.1
