Add a simple-mfd representing IMEM on SDX55 and define the PIL
relocation info region, so that post mortem tools will be able to locate
the loaded remoteproc.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
---
arch/arm/boot/dts/qcom-sdx55.dtsi | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/arch/arm/boot/dts/qcom-sdx55.dtsi b/arch/arm/boot/dts/qcom-sdx55.dtsi
index f2805b526516..4ca871735025 100644
--- a/arch/arm/boot/dts/qcom-sdx55.dtsi
+++ b/arch/arm/boot/dts/qcom-sdx55.dtsi
@@ -379,6 +379,21 @@ tlmm: pinctrl@f100000 {
#interrupt-cells = <2>;
};
+ imem@1468f000 {
+ compatible = "simple-mfd";
+ reg = <0x1468f000 0x1000>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ ranges = <0x0 0x1468f000 0x1000>;
+
+ pil-reloc@94c {
+ compatible = "qcom,pil-reloc-info";
+ reg = <0x94c 0x200>;
+ };
+ };
+
apps_smmu: iommu@15000000 {
compatible = "qcom,sdx55-smmu-500", "arm,mmu-500";
reg = <0x15000000 0x20000>;
--
2.25.1
